The start-r QSB has a different pmic than the older start QSB.
Add a new dts for the QSRB and let barebox generate two images when
LOCO is selected.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Solidrun has renamed the Carrier-1 to Hummingboard.
This is also the name that is used in upstream Linux,
change barebox to be in line with that.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Only the 1GB variant is supported for now, as I don't
have anything other to test with.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds support for new board variants. Now Supported are:
- i.MX6q module with 1GiB Micron RAM
- i.MX6d/q modules with 1GiB/2GiB Nanya RAM
- i.MX6s modules with 512MiB/1GiB Nanya RAM
This has been tested on:
- i.MX6q module with 1GiB Micron RAM
- i.MX6d module with 2GiB Nanya RAM
- i.MX6s module with 1GiB Nanya RAM
The possible RAM equipment is:
- For the 512MiB module: 2x Nanya nt5cb128m16fp-di
- For the 1GiB modules: 2x Nanya nt5cc256m16cp or 4x Micron MT41K128M16JT-125
- For the 2GiB module: 4x Nanya nt5cc256m16cp
The 512MiB Nanya board is assumed to work with the same DCD table
as the 1GiB Nanya board. The variant is detected by mirroring at
512MiB, but this hasn't been tested by Pengutronix.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The multi image startup process used to have three binaries involved:
- The lowlevel board code to initialize SDRAM
- the uncompressor
- the regular (compressed) barebox binary
Drop the uncompressor and put the uncompress code into the lowlevel
board code binary. This makes the startup process easier.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The image will be named after the official name of this board:
barebox-freescale-mx6-sabreline.img
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To keep things clean I removed all support for the old way to build
images. There is now a single tegra_v7 defconfig which builds both
supported Tegra boards as images.
The new image generation also paves the way for integration of the
tegra-cbootimage tool to produce directly flashable images.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
imximage-y is only needed to add its content to $targets so that
the build system does not rebuild the files because of the files
not being in $targets.
Automatically generate the files and add them to $targets and remove
imximage-y
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds support for the Phytec phyFLEX-i.MX6 board. The phyFLEX-i.MX6
is a system-on-module based on the Freescale i.MX6 SoC. This patch supports
the 1GiB and 2GiB variants on a PBA-B-01 baseboard.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support for the GK802 'QUAD CORE Mini PC', which seems to be loosely
based on the Freescale i.MX6Q HDMI dongle reference design.
It is supposedly identical to the Hiapad Hi802.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This reverts commit 08c0e206b3.
The external NAND boot code currently uses the _text linker variable
to determine a place for the image. This doesn't work with multi image
support which will link the binary at 0x0. Revert multi image support
for the pcm038 for now until a solution is found.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is necessary because the C name for the flash header matches
the filename. For multiple board support we have to make the name
unique to prevent linker errors.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is necessary because the C name for the flash header matches
the filename. For multiple board support we have to make the name
unique to prevent linker errors.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This converts the Freescale i.MX53 loco aka qsb board to
multi image. The image will be named:
barebox-freescale-imx53-loco.img
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This also converts the Phytec phyCORE i.MX27 aka pcm038 to use
image compression. The image will be named
barebox-phytec-phycore-imx27.img
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds the make infrastructure to build multiple SoC or
board specific images from a single barebox binary.
The basic idea is that we no longer have a single pbl, but instead
multiple pbls, one per image if necessary. Each pbl is defined
by its entry function so that each pbl can do exactly what a given
board needs. Additionally the pbls together with a self extracting
barebox binary can be encapsulated in specific image formats.
squashed in build fixes from Lucas Stach for make version >= 3.82:
Split Multimage Makefile rule in explicit and implicit parts
Fixes build with make version >=3.82
Frome the make 3.82 NEWS file:
* WARNING: Backward-incompatibility!
In previous versions of make it was acceptable to list one or more explicit
targets followed by one or more pattern targets in the same rule and it
worked "as expected". However, this was not documented as acceptable and if
you listed any explicit targets AFTER the pattern targets, the entire rule
would be mis-parsed. This release removes this ability completely: make
will generate an error message if you mix explicit and pattern targets in
the same rule.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Lucas Stach <dev@lynxeye.de>