This redefines the sdram controller registers as offsets to the base
rather than as absolute addresses. All users are fixed to use the
SoC specific base address.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This was once disabled because we had no board support. This has
changed, so enable the S5P board support in the config so that
the friendlyarm_tiny210_defconfig actually builds for the correct
machine.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
board_init_lowlevel is no longer called from generic code, so we can't
just return from in. Instead we have to jump to board_init_lowlevel_return
manually. For the a9m2440 board one case was missed to convert. This
is broken since:
| commit faf7b7af6e
| Author: Jan Luebbe <jlu@pengutronix.de>
| Date: Mon Sep 24 10:18:34 2012 +0200
|
| ARM: give boards control of the reset entry point
|
| On some SoCs (for example AM35xx), the ROM bootloader passes useful
| information in r0 when jumping to barebox.
|
| To avoid overwriting this in the generic reset code, we introduce
| common_reset as a C function and as an assembler macro. This is then
| called form the reset entry point (either in common or in board code).
|
| This patch is based on code by Sascha Hauer <s.hauer@pengutronix.de>.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Rather than doing this in the SoC specific code just print
it in imx_set_silicon_revision. This saves some lines of code
and also results in i.MX27 now also having the silicon revision
printed during startup.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This moves the known i.MX bootsource settings to a single file
so that the code can be shared. Also we add a enum for the different
boot sources so that it can be used in C Code and not only on the shell.
The pcm038 board is changed to use it instead of digging in the registers
manually.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On i.MX we enable all necessary clocks during startup of the clock
controller driver, so we do not need the register hacking in the drivers
anymore.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- increased the region size for OMAP3, as it was not correct
- decrease region size for OMAP4 to prevent overlapping.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As the gpio functions are not available at this point, set the gpio manually.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- for i.MX1 the register is in the System Control unit, so move
the code to arch/arm/mach-imx/imx1.c
- for the other i.MX the register is in the watchdog unit, so move
the code to drivers/watchdog/imxwd.c
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
of_alias_get_id() returns the number of the gpio bank, so we have
to multiply with 32 to get the gpio base.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- Add a separate header file for the iomux-v1 just like done for
iomux-v3.
- initialize iomux from SoC code so that we do not depend on IMX_GPIO_BASE
anymore.
- define registers as offset to the base rather than absolute addresses
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
All i.MX SoCs now use the same imx_silicon_revision() function to get
the revision. Add a separate header file for it and a common function
used on all SoCs.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds the device id mechanism to the i.MX fec driver and
uses it to determine the fec version. Also adds devicetree
probing support.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We called create_sections with 4096MB as size argument, but create_sections
expected the argument in bytes, so create sections was completely optimized
away due to the size >>= 20. This patch changes the size argument to be in
megabytes and adjusts map_cachable to pass the argument in megabytes.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We can't do anything useful in the error function, so we just hang.
This has the advantage that at least when a JTAG debugger is connected
we can see what happens. Otherwise the code just jumps to NULL in case
of an error.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since we have phylib the phy won't be detected after poweron. It seems
the phy needs some time after reset.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- The i.MX1 timer does not have IPG clock as source, so rename
the define accordingly
- for the i.MX31 timer we want to use the per clock, not the ipg
clock.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The old clock support is now unused. Remove it. The former i.MX clko
command is superseeded by generic clock manipulation commands.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Vicente
Teresa Gámez
Alexander Shiyan
Jean-Christophe PLAGNIOL-VILLARD