ntohl always converts 32 bits even on archs where sizeof(long) == 8.
"ntoh32" is a much more intuitive name here. Also the name of the 64 bit
variant that is also added isn't questionable.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is needed for nfs3 support as some types became bigger compared to
nfs2.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
While at it also fix the type of flen holding a string length
(int -> size_t).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of letting rpc_lookup_req set mount_port and nfs_port, let it
return the port found and let the caller use that information.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When a former transaction was aborted by hitting Ctrl-C the old reply might
still hang in the ethernet controller making all further transactions fail.
So just skip over old replies.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We're speaking rpc mount version 2 (i.e. the same version as the
implemented nfs protocol), so also specify that in the lookup.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On some architectures (e.g. alpha, amd64, arm64, ia64, s390x, mips64)
sizeof(ulong) is 8 which made net_read_uint32 actually read too much and
even returned the wrong value on big endian machines.
(Note the second issue isn't that critical though, because the only
architecture from the list above that uses big endian byte order is s390x
...)
Also change the argument to void * because the pointer is not necessarily
properly aligned.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This renames the Freescale and Phytec board directories and defconfig
files to a common naming scheme. The board directories are named
<vendor>-<board> and the defconfig files are named
<vendor>-<board>_defconfig. Also the DataModul realq7 is renamed to its
Marketing Name eDM-QMX6.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some boards need gpio functions very early and also sometimes
is useful to toggle gpios during early code debug. This adds a header
file for setting i.MX gpios early.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Which bootmode is selected has no longer to be chosen by Kconfig. The
boards can decide themselves which bootmode they want to support. This
makes it unnecesary to ask the user which bootmode shall be supported,
so the "Select boot mode" becomes invisible and both support will be
compiled in as needed by the boards. NAND_IMX_BOOT goes away and the
already existing ARCH_IMX_EXTERNAL_BOOT_NAND can now be used for the
boards to depend on external nand boot.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Only one GPT will be used, but with devicetree support we can't predict
which one it is, so we need the clock lookup for all GPTs to ensure
that the timer gets its clock.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If we are running from NFC SRAM and we are passed boarddata
containing a devicetree pointer then it point to an address relative
to the NFC SRAM start. First thing we do is to copy the initial
binary to SDRAM and jump there. The devicetree pointer has to be
adjusted by this offset.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When compiling with multiimage support ld_var(_barebox_image_size) only
contains the length of the PBL image, but not including the appended
compressed data. With this patch the image size is read from the barebox
header instead which contains the correct size, either from the linker
or from the fix_size tool.
This makes the external_nand_boot compatible with multiimage support.
Tested on Phytec phyCARD-i.MX27 with and without PBL.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The pblx is a self extracting barebox binary. This doesn't have
the size of the image correctly set because the linker doesn't
generate it for relocatable binaries.
This currently only works on ARM, but this is the only architecture
supporting multi images anyway. TO make it work on other architectures
fix_size would have to be extended to recognize other images.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of passing the offset to the fix_size tool check the image to
fixup for a valid header so that only recognized files are fixed up.
This makes the usage of this tool safer.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>