The "Misc devices" menu does not enable anything by itself, so make it a
regular menu rather than a menuconfig.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
default_environment_path only exists when CONFIG_ENV_HANDLING is enabled.
Boards would have to #ifdef this if they wanted to use
default_environment_path. Use accessor functions instead which can
be ifdeffed on a single place.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch updates the CLPS711X UART driver.
The update adds support for use with devicetree and
makes driver comatible with current driver from kernel.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch updates the CLPS711X GPIO driver.
The update adds support for use with devicetree and
optimizes "probe" a bit.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
No reason to make SYSCON driver name unique to that processor.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The AX88772B uses only 11 bits of the header for the actual size. The other bits
are used for something else. This causes dmesg full of messages:
asix_rx_fixup() Bad Header Length
This patch trims the check to only 11 bits. I believe on older chips, the
remaining 5 top bits are unused.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Linux specifies the linux,stdout-path property in the /chosen node
in the devicetree. Unfortunately this is ignored in most cases.
For cases in which barebox uses this property for its own use we
translate this into a Linux boot arg with:
- the console name provided by the serial driver
- the the instance from the 'serial' alias
- the baudrate from the actual baudrate.
So with this it's for devicetee enabled boards no longer necessary
to manually assign a console= parameter. Should a user not want
to use the automatically assigned parameter it should do:
global.linux.bootargs.console=
in the environment.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
having DSR support in mci-core we need a way to
forward the DSR value to the driver. Add it to
platform data for imx-esdhc
TODO: implement the same for other host controller
drivers
Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
add optional DSR support. This should go into the kernel, too
Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The eMMC and the SD-Card specifications describe the optional SET_DSR command.
During measurements at our lab we found that some cards implementing this feature
having really strong driver strengts per default. This can lead to voltage peaks
above the specification of the host on signal edges for data sent from a card to
the host.
Since availability of a given card type may be shorter than the time a certain
hardware will be produced it is useful to have support for this command (Alternative
would be changing termination resistors and adapting the driver strength of the
host to the used card.)
Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Year is coded in 4 bits of CID. eMMC 4.41
adds a new interpretation rule: production
year for 4.41 cards and newer is between 2010
and 2025 with 0 corresponding to 2013.
This fix was inspired by currect kernel code.
Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
eMMC is available up to version 4.5 but the
correct version is not decoded. Change version
definitions to support more minor verions, add
missing versions and parse the minor versions from
ext_csd.
After this, card detection code and devinfo reports
correct versions.
Handling is inspired by u-boot code.
Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Let of_find_node_by_path_or_alias also find a node starting with an alias
followed by a path like "i2c0/tps@24"
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If an error occured during gpio_request_array() then we can
get not requested gpio with nonempty garbage "label" field
value. Afterward the "gpiolib" command can try to use this
nonempty garbage value.
This patch prevents this error situation.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Just copy gpiod_request() function logic from linux-v3.13-rc7.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
"dev" may uninitialized or points to incorrect device. While at
it make the message more informative.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On the pcm038 the ULPI phy is found correctly, but after
a power cycle the attached devices are not found. Adding
some delay fixes this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The ULPI code does not print a message when the operation times
out. Add one to the caller so that he gets an idea that something
is going wrong.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
imx_chipidea_port_init() will be called during startup from
the ehci driver. Calling it before setting up the PORTSC register
is only necessary in HSIC mode.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add more paranioa asserts to make it easier to detect
implementation errors.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On error we have to free all three temporary lists.
Reported-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The test:
if (!a && b)
a = b;
can be symplified in:
if (!a)
a = b;
And there's no need to test if ubi->image_seq is not null, because if it is,
it is set to image_seq.
So, we just test if image_seq is not null.
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some old UBI implementations (e.g. U-Boot) have not implemented the image
sequence feature.
So, when erase blocks are written, the image sequence in the ec header
is lost (set to zero).
UBI scan_all() takes this case into account (commits
32bc4820287a1a03982979515949e8ea56eac641 and
2eadaad67b2b6bd132eda105128d2d466298b8e3)
But fastmap scan functions (ubi_scan_fastmap() and scan_pool()) didn't.
This patch fixes the issue.
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>