a3ffa97f40
rename U-Boot-v2 project to barebox
...
This has been done with the following script:
find -path ./.git -prune -o -type f -print0 | xargs -0 -r sed -i \
-e 's/u2boot/barebox/g' \
-e 's/U2Boot/barebox/g' \
-e 's/U-boot V2/barebox/g' \
-e 's/u-boot v2/barebox/g' \
-e 's/U-Boot V2/barebox/g' \
-e 's/U-Boot-v2/barebox/g' \
-e 's/U_BOOT/BAREBOX/g' \
-e 's/UBOOT/BAREBOX/g' \
-e 's/uboot/barebox/g' \
-e 's/u-boot/barebox/g' \
-e 's/u_boot/barebox/g' \
-e 's/U-Boot/barebox/g' \
-e 's/U-boot/barebox/g' \
-e 's/U-BOOT/barebox/g'
find -path ./.git -prune -o \( -name "*u-boot*" -o -name "*uboot*" -o -name "*u_boot*" \) -print0 | \
xargs -0 -r rename 's/u[-_]?boot/barebox/'
It needs some manual fixup following in the next patch
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-12-15 10:18:30 +01:00
e2b4a792f8
arm/Makefile: don't set ABI unconditionally to "apcs-gnu"
...
Since commit 67b2697613
2009-12-11 11:49:29 +01:00
f5caf0c5b2
omap: Use correct label in arch/arm/Makefile
...
Currently all omap boards reside in boards/omap. This is
probably not a good idea as it leaves no good place to
put custom omap boards in. Anyway, make the boards compile
again until someone provides a better solution.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-12-10 12:15:01 +01:00
71306852fd
arm: generate mach-types.h instead of static version
...
mach-types against v2.6.32-rc5
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-11-03 13:01:46 +01:00
67b2697613
arm: add configurable AEABI support
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-11-03 13:01:27 +01:00
7dcef1bb20
arm: update cpu tunning
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-03 09:47:39 +01:00
a4292fe7cf
arm: add endian config support
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-03 09:47:32 +01:00
c7ce98dc8d
arm: use -marm as default when it's possible
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-03 09:47:24 +01:00
159c92d140
arm: remove non used cpu-y
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-03 09:47:12 +01:00
d4a54dfa42
arch/arm/Makefile: cleanup
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-03 09:46:09 +01:00
bab3a3b976
arm: introduce CPU CONFIG from linux
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-03 09:45:55 +01:00
eea19dc488
at91: Atmel Ref board fix config MACH to match with mach-types
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-11-02 14:44:43 +01:00
af88baca30
at91: add support for the at91sam9263ek board of Atmel
...
Here is the page on Atmel website:
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice VILCHEZ <patrice.vilchez@atmel.com>
Cc: Sedji Gaouaou <sedji.gaouaou@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-02 08:31:52 +01:00
f6a579da9c
[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-10-22 14:21:25 +02:00
9956bdf77d
arm: merge proc-armv/ptrace.h and ptrace.h in one file
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-10-22 12:12:48 +02:00
81362c2b2a
at91sam9: move to at91
...
this will allow to add at91rm9200 with the same api as done in the kernel
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-10-20 15:02:36 +02:00
55e94293d5
add Freescale MX25 3stack board support
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-09-08 12:42:56 +02:00
b2db2e6cd8
Add Eukrea CPUIMX27 support
...
CPUIMX27 is built around Freescale's i.MX27 and has up to 64MB of
NOR Flash, up to 512MB of NAND Flash and up to 256MB of mDDR,
it includes an ethernet PHY in MII mode, an I2C RTC and a
ST16554 QuadUART on nCS3.
Signed-off-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-07-16 09:46:34 +02:00
f1ed0ae1c6
Add the basic support for the DIGI a9m2440 CPU card.
...
Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2009-07-01 15:58:57 +02:00
27acfbda77
Add the basic support for the DIGI a9m2410 CPU card.
...
Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2009-07-01 15:58:48 +02:00
5139e618b8
Add basic architecture support for Samsung's S3C2410 and S3C2440 CPU.
...
It includes a
- driver for the internal UART
- driver for the internal NAND controller
- support to boot from NAND
- PLL handling
- SDRAM initialisation
Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2009-07-01 14:36:40 +02:00
0780441a3f
[mmccpu] add new board: Bucyrus MMC-CPU
...
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2009-05-19 10:21:53 +02:00
a3f20a4545
Arm: remove -msoft-float option
...
This breaks compilation on a hardfloat toolchain as we would need
AFLAGS += -msoft-float aswell. Since we do not use floating point
we can equally well remove the option completely.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-21 16:56:16 +02:00
5151577032
add initial phyCard-i.MX27 support
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-14 17:10:07 +02:00
fcfbd10d3c
Add Freescale i.MX21 support
...
Signed-off-by: Ivo Clarysse <ivo.clarysse@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-07 08:55:04 +02:00
0cb4c4e2a5
imx: Add Phytec Phycore i.MX35 aka PCM043 support
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-02-06 14:44:46 +01:00
9a252f1ac9
add Support for Freescale MX35 3Stack Board
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-02-06 14:44:46 +01:00
0dd24dc17d
add Ronetix pm9263 board support
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-08-01 12:16:31 +02:00
8a03bff03e
[arm] Add cleanup flags only when modules are disabled. Otherwise
...
we remove functions from the binary which are needed for
modules
2008-07-03 10:30:44 +02:00
f3351ebd78
add basic at91sam9260 support. Currently only second stage
...
bootloader is supported:
- No SDRAM initialisation
- No UART init / baudrate change
2008-06-06 09:30:32 +02:00
053034d182
010-OMAP-addbase
...
[Patch 10/17] U-Boot-V2:ARM:OMAP3: Add support for OMAP and Cortex A8
This patch adds support for OMAP3 platforms. Mainly to setup the infrastructure.
ARMV7 requires a different I/D cache cleanup code which is introduced in this patch
Signed-off-by: Nishanth Menon<x0nishan@ti.com>
2008-06-05 19:45:28 +02:00
1ecafc5f8d
004-arm-makefile
...
[Patch 04/17] U-Boot-V2:ARM: Remove unwanted flags from Makefile
CFLAGS: "-D __ARM__" should have been "-D__ARM__". this breaks sparse check.
Further -nostdinc in Makefile is redfined by
commit ID:847934bc960ba1588c87e283118318dfdd78d4c0
This is unecessary as NOSTDINC_FLAGS defines it
Signed-off-by: Nishanth Menon<x0nishan@ti.com>
2008-06-05 19:45:14 +02:00
36ffd6f18a
[kbuild] move -pipe from architecture Makefiles to toplevel
...
Makefile
2008-06-03 12:54:37 +02:00
39a78d9951
[kbuild] remove -Wall from architecture Makefiles. It's already
...
in toplevel CFLAGS
2008-06-03 12:51:05 +02:00
847934bc96
[kbuild] move -nostdinc from architecture Makefiles to toplevel
...
Makefile
2008-06-03 12:39:45 +02:00
b8725ffe1d
[kbuild] move -ffreestanding from architecture Makefiles to toplevel
...
Makefile
2008-06-03 12:37:52 +02:00
bca64df501
[kbuild] move -fno-builtin from architecture Makefiles to toplevel
...
Makefile
2008-06-03 12:36:35 +02:00
7681d868ba
[kbuild] move -Os flag from architecture Makefiles to toplevel
...
Makefile
2008-06-03 12:29:57 +02:00
878f38de8f
[kbuild] change architecture Makefiles not to overwrite
...
CFLAGS, instead append them to the existing CFLAGS.
Also, remove all double CFLAGS
2008-06-03 12:24:50 +02:00
22d3dc0d27
[arm] remove unsused sections while linking
2008-05-12 15:52:23 +02:00
7b4e9c4a82
[i.MX]: Basic board support for the Freescale i.MX27 eval board
2008-02-19 15:59:37 +01:00
049063e2ad
remove -isystem with empty argument
...
This patch removes the "-isystem $(gccincdir)" from the
arch/*/Makefile because gccindir is empty.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2007-11-29 20:03:37 +01:00
57bb3cd90d
don't against link libgcc
...
We don't want to link against libgcc.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2007-11-28 08:21:02 +01:00
a7d96488e5
Using correct board names all over the place
...
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
2007-11-08 18:23:44 +01:00
bd8ac3ec63
arch/arm/Makefile: fix proc link creation for external builds
2007-10-17 19:03:38 +02:00
3d1940a4a0
merge sha + jbe
2007-10-17 18:12:33 +02:00
3be8ed2fa1
adding i.MX31 CPU support
2007-10-17 17:57:55 +02:00
d59ca7feb3
Linking: Remove linker scripts from (arm based-) boards and add
...
a generic linker script to arch/arm/lib/u-boot.lds.S.
If a board wants to overwrite a linker script it can do
so using CONFIG_BOARD_LINKER_SCRIPT.
There is no generic linker script for ppc and blackfin
yet, so still use the board specific one.
2007-10-17 12:21:53 +02:00
514eb64b1a
beginning phycore pcm038 i.MX27 support
2007-10-08 00:13:19 +02:00
153cf7bb6e
add arm specific bits for modules
2007-10-01 09:51:04 +02:00
Sascha Hauer
Marc Kleine-Budde
Jean-Christophe PLAGNIOL-VILLARD
Eric Benard
Juergen Beisert
Ivo Clarysse
Nishanth Menon
Juergen Beisert
sascha
Juergen Beisert