board_init_lowlevel is no longer called from generic code, so we can't
just return from in. Instead we have to jump to board_init_lowlevel_return
manually. For the a9m2440 board one case was missed to convert. This
is broken since:
| commit faf7b7af6e
| Author: Jan Luebbe <jlu@pengutronix.de>
| Date: Mon Sep 24 10:18:34 2012 +0200
|
| ARM: give boards control of the reset entry point
|
| On some SoCs (for example AM35xx), the ROM bootloader passes useful
| information in r0 when jumping to barebox.
|
| To avoid overwriting this in the generic reset code, we introduce
| common_reset as a C function and as an assembler macro. This is then
| called form the reset entry point (either in common or in board code).
|
| This patch is based on code by Sascha Hauer <s.hauer@pengutronix.de>.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This moves the known i.MX bootsource settings to a single file
so that the code can be shared. Also we add a enum for the different
boot sources so that it can be used in C Code and not only on the shell.
The pcm038 board is changed to use it instead of digging in the registers
manually.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On i.MX we enable all necessary clocks during startup of the clock
controller driver, so we do not need the register hacking in the drivers
anymore.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
All i.MX SoCs now use the same imx_silicon_revision() function to get
the revision. Add a separate header file for it and a common function
used on all SoCs.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds the device id mechanism to the i.MX fec driver and
uses it to determine the fec version. Also adds devicetree
probing support.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since we have phylib the phy won't be detected after poweron. It seems
the phy needs some time after reset.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This way you can specify as previously set the dhcp parameter via global.dhcp.xxx
and get the result via global.dhcp.xxx
This is need for the defaultenv-2 to add the bootp suppport.
Use it on defaultenv too to have only one set of var.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
The following missed to add a jump to board_init_lowlevel_return for the
phycard pca100 board:
| commit 244198ea8b
| Author: Sascha Hauer <s.hauer@pengutronix.de>
| Date: Sun Jul 8 18:30:42 2012 +0200
|
| ARM boards: Use _text rather than TEXT_BASE
|
| With compressed image support TEXT_BASE will become the base
| address of the uncompressed image. What the boards want instead
| is the base address of the decompressor code or, if not compressed,
| the base address of the uncompressed image. Use _text which is
| the correct one for both cases.
|
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This fixes it by adding the jump. Also imx_nand_load_image is directly
called from lowlevel_init.S which fixes compilation with pbl support
enabled.
Tested with both compression enabled and disabled.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The cfa10036 board file were missing the length parameter when adding
devices. This made barebox crash early in the boot, in the mxs-mci
driver.
Provide the resources lengths in a consistent format.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On some SoCs (for example AM35xx), the ROM bootloader passes useful
information in r0 when jumping to barebox.
To avoid overwriting this in the generic reset code, we introduce
common_reset as a C function and as an assembler macro. This is then
called form the reset entry point (either in common or in board code).
This patch is based on code by Sascha Hauer <s.hauer@pengutronix.de>.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Adapt phylib from linux
switch all the driver to it
reimplement mii bus
This will allow to have
- phy drivers
- to only connect the phy at then opening of the device
- if the phy is not ready or not up fail on open
Same behaviour as in linux and will allow to share code and simplify porting.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This fixes the following warnings:
arch/arm/boards/freescale-mx6-sabrelite/board.c: In function 'sabrelite_ehci_init':
arch/arm/boards/freescale-mx6-sabrelite/board.c:265:2: warning: implicit declaration of function 'imx6_usb_phy1_disable_oc' [-Wimplicit-function-declaration]
arch/arm/boards/freescale-mx6-sabrelite/board.c:266:2: warning: implicit declaration of function 'imx6_usb_phy1_enable' [-Wimplicit-function-declaration]
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Use 512k NAND Partion for barebox in enviroment and boards code
pcm049: use 4MB for kernel
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so be can add more format support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For some reason, the mxs-boards missed some length parameters when adding
devices. This made reading from ocotp crash in the current version.
Provide missing lengths, use a consistent format and fix the length for
the LCDIF.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
imx23-olinuxino is a board designed by Olimex.
It has the following features:
- Freescale iMX233 ARM926J processor at 454MHz
-64 MB RAM
-SD-card connector
-TV PAL/NTSC video output
-2 USB High Speed Hosts
-Ethernet 100 Mbit
-Stereo Audio Input
-Stereo Headphones Audio Output
More information at:
http://www.olimex.com/dev/imx233-olinuxino-maxi.html
Signed-off-by: Fadil Berisha <f.koliqi@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
vicencb@gmail.com
Jean-Christophe PLAGNIOL-VILLARD
Maxime Ripard
Jan Luebbe
Steffen Trumtrar
Jan Weitzel
Wolfram Sang
Fadil Berisha