use a more generic UART selection on OMAP so it can be extended to
other OMAPs
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
some sort of UART setup has to be done in order to use PUTC_LL
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
omap4_usbboot_pdata is not a pointer, so remove the "p"
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch provides rename MFD-related symbols for using MFD-prefix.
Additionally, sorting mfd/Kconfig and mfd/Makefile records.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
All boards use hardcoded SDRAM addresses, copied from the board init file.
OMAP3 boards are a bit special, they had a SoC specific reset() function. This
is renamed to omap3_invalidate_dcache() and called from the board lowlevel init
code now.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently Kconfig dependencies are used to allow non-interactive builds.
This leads to problems in Kconfig getting the dependencies right.
This patch adds a barebox_main function pointer which is called at the
end of the startup process. This defaults to run_shell when a shell is
enabled.
With this the HAVE_NOSHELL Kconfig variable can be removed. Non interactive
builds can now be enabled for every board allowing to compile a binary
without further Kconfig dependencies. This also allows for more flexibility,
for example boards may decide to try non-interactive startup first and
call run_shell if that fails.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a function to register the cpws device and another one
to register the MAC addresses provided by the am33xx.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The am33xx hsmmc controller is actually a omap4 type controller which
means that it has a 0x100 offset in the registers.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Only the OMAP4 has a register offset of 0x100 in the register space. Fix
this by using the device id mechanism. This became broken when the device
register convenience functions were introduced.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Created ARCH for AM33xx boards as second stage bootloader.
This includes:
- Added dmtimer0
- Created basic header files
- Added MMC support for ARCH_AM33XX
- Added reset function
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Some header file cleanup by:
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The hsmmc module has a 0x100 offset in its register space. The real
register space size for the module is 4K, so when we register the
device with the size 4k, we have to account for the offset in the
driver, not in the resource allocation.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- remove mach/silicon.h and include omap?-silicon.h directly
- include mach/omap?-clock.h directly where needed
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
ARCH_OMAP2 missing in barebox.
ARCH_OMAP3 and ARCH_OMAP4 is only choice for this target.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
omap3 has a soc specific reset function, make sure it calls common_reset
so that the proper CPU flags are set.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch provides a global cleanup barebox Kconfig files. This includes
replacing spaces to tabs, formatting in accordance format, removing
extraneous lines and spaces. No functional changes.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add and use meaningful macro names for OMAP4 GPIO addresses, and add a
comment to explain the 0x100 offset for OMAP4.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In addition, collapse adjacent comment blocks into one and remove
extraneous blank lines.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
putc already is a regular barebox function. To avoid conflicts and
confusions just let architectures define PUTC_LL directly instead
of going through this addiotional redirection.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
structure is used within barebox only and there is no need to pack it.
As this option has a negative performance impact, remove it.
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Switch to new environment and add the bootscripts needed for mmc. Also,
update defconfig for new environment.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Needed so that the linker can throw it away when unused. This is needed
at least on current master for being able to enable pbl support for omap3
boards.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- increased the region size for OMAP3, as it was not correct
- decrease region size for OMAP4 to prevent overlapping.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As the gpio functions are not available at this point, set the gpio manually.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Booting from SPI on an AM35xx (and possibly other TI SOCs) requires
a special format:
- 32 bit image size in big-endian
- 32 bit load address in big-endian
- binary image converted from little- to big-endian
The mk-am35xx-spi-image tool converts barebox.bin to
this format.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On some SoCs (for example AM35xx), the ROM bootloader passes useful
information in r0 when jumping to barebox.
To avoid overwriting this in the generic reset code, we introduce
common_reset as a C function and as an assembler macro. This is then
called form the reset entry point (either in common or in board code).
This patch is based on code by Sascha Hauer <s.hauer@pengutronix.de>.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
OMAP3 is the only architecture which has a arch_init_lowlevel in
which it invalidates the dcache. This can easily be done in
board_init_lowlevel aswell. Since on OMAP3 we are always executed
in SRAM we'll never need a board specific lowlevel_init. So the
easiest way of getting rid of this special handling is to just
rename the function.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
OMAP3 is the only architecture which has a arch_init_lowlevel in
which it invalidates the dcache. This can easily be done in
board_init_lowlevel aswell. Since on OMAP3 we are always executed
in SRAM we'll never need a board specific lowlevel_init. So the
easiest way of getting rid of this special handling is to just
rename the function.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add functions to read the barebox_arm_head, check barebox magicword
and read out the barebox image size.
Create a inital partion of 1Mb to access the barebox image on nand.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Change clock init to allow early gpio access. Add support for 4460 clocks.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
based on: [U-Boot] [PATCH v 4/5] omap4: support TPS programming
TPS62361 is the new power supply used in OMAP4460 that
supplies vdd_mpu.
VCORE1 from Phoenix supplies vdd_core and VCORE2 supplies
vdd_iva. VCORE3 is not used in OMAP4460.
Signed-off-by: F. Gasnier fabrice.gasnier@cenosys.com
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With pbl support enabled most boards need a pbl-y for their lowlevel
stuff.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Use the prefetch engine to improve NAND performance. The howto
is derived from the Kernel. Unlike the kernel we do not make
the access mode configurable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of passing several options into the nand register function
it is much more straight forward to just pass the platformdata.
While at it, rename the function to omap_add_gpmc_nand_device to
better describe what it does.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- dev_ready is supposed to return whether the device is ready or
not, not to poll until the device is ready.
- dev_ready should return true for ready and false for not ready
- waitpin polarity is not needed (at least the kernel does not have it)
- wait_mon_mask must be 32bit.
The code was unused since no board specified a wait pin, so no breakage
included. This also removes the now unused timeout variable from
platformdata.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This configuration can be used to use barebox as
x-loader replacement.
Also the ECC-Mode is changed from SOFT to BCH8.
Signed-off-by: Juergen Kilb <J.Kilb@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add reset to gpmc_generic_init as proposed by TRM.
This also fixes some strange timing issue while GPMC Initialization for
NAND OMAP4460
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Without yet adding in the underlying code, extend the revision
checking code to return additional values for PandaBoard ES boards.
Much of the code was taken close to verbatim from U-Boot.
compile tested, and confirmed that this code behaves identically to
the original panda configure and build for the three pandas i have:
* Rev A2 (boots)
* Rev EA3 (boots)
* Rev B1 ES (no output)
so while there's still work to be done, this at least represents the
necessary infrastructure to start *recognizing* panda ES boards.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Tested-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add a OMAP4 specific GMPC nand config for pcm049 and phyCARD-A-XL2 to increase
performance. Also add the possiblility to pass a board GPMC nand config.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Support for omap4 based Phytec phyCARD-A-XL2 board
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Current message indicating that SD card isn't
mounted is misleading if the card has only one
partition.
Updated the message to indicate that mounting
the specific partition failed.
Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Remove what is an apparently valueless Kconfig variable HAS_OMAP_NAND.
A search of the entire source tree shows:
$ grep -r HAS_OMAP_NAND *
arch/arm/mach-omap/Kconfig: select HAS_OMAP_NAND
arch/arm/mach-omap/Kconfig: select HAS_OMAP_NAND
arch/arm/mach-omap/Kconfig: select HAS_OMAP_NAND
arch/arm/mach-omap/Kconfig: select HAS_OMAP_NAND
arch/arm/mach-omap/Kconfig:config HAS_OMAP_NAND
arch/arm/configs/phycard_a_l1_defconfig:CONFIG_HAS_OMAP_NAND=y
$
where the definition of that variable is simply:
config HAS_OMAP_NAND
bool
so it seems pretty clear it can be removed as nothing is using it.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Without the proper OMAP3 or OMAP4 dependency directives, you get the
wrong list of choices displayed based on which OMAP variant you pick.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
board_init was moved to pure_initcall. broken since:
commit 0adce7ec68
Author: Sascha Hauer <s.hauer@pengutronix.de>
Date: Sun Jan 15 21:11:17 2012 +0100
ARM omap3: move board_init to pure_initcall
board_init initializes the mux and sdram. For both there is no
need to configure this so early. Move the code to a pure_initcall
and remove the surrounding unneeded code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Juergen Kilb <J.Kilb@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This function consists of only inline asm statements, so
use assembly in the first place. Also makes sure that the
function is compiled in arm mode.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Sanjeev Premi <premi@ti.com>
No need to do this so early. We can't print anything right
now anyway, so there is no need to setup vectors.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Sanjeev Premi <premi@ti.com>
There is no need to call a_init before relocation, so rename
the function to omap3_core_init and call it from board code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Sanjeev Premi <premi@ti.com>
board_init initializes the mux and sdram. For both there is no
need to configure this so early. Move the code to a pure_initcall
and remove the surrounding unneeded code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Sanjeev Premi <premi@ti.com>
The X-loader startup relocates to SRAM anyway, so there
is no need to be runnable from flash for the clock code.
This config is disabled in all defconfigs anyway, so remove
it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Sanjeev Premi <premi@ti.com>
this will allow to switch omap3 to standard organisation
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Enable the flag HAVE_NOSHELL to allow first stage
bootloader to be built for this board.
Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Support the setup of the mmc voltage, when booting OMAP4 with twl6030
from nand.
Signed-off-by: Alexander Aring <a.aring@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Added i2c support for omap4. Tested on pcm049.
Driver based on linux kernel implementation.
Also added a shift to access 16-bit registers
to make support for OMAP730/850 possible.
If accessing a non existing slave the bus will go into arbitration mode.
It's unable to recover from it.
Signed-off-by: Alexander Aring <a.aring@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently, there are multiple definitions of run_shell()
for each board that can be build in "xload" configuration.
Now there is only one function used by all boards.
The functions defined in xload.c are used only when "xload"
configuration used; but it gets compiled unconditionally.
This has been fixed as well.
Signed-off-by: Sanjeev Premi <premi@ti.com>
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To allow for some generic io accessors introduce io.h and use
this instead of asm/io.h throughout the tree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This helper function can be used for automatic
SDDR configuration based on register settings
made by a previously first stage bootloader
i.e. x-loader.
Signed-off-by: Juergen Kilb <J.Kilb@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add platform data to specify maximum frequency of hsmmc interface
which can be restricted due to external level shifters.
Signed-off-by: Juergen Kilb <J.Kilb@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
use generic read/write depending on the memory size
if no reg_read/write defined
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
If OMAP4 fall back to MMC1 boot in bootmode 0x39 (NAND,USB,UART,MMC1)
NAND and MMC bit in TRACING_VECTOR3 are set. With changed order it will
detect boot from MMC.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Vicente Bergas
Sascha Hauer
Alexander Shiyan
Jean-Christophe PLAGNIOL-VILLARD
Jan Luebbe
Teresa Gámez
Robert P. J. Day
Enrico Scholz
Jan Weitzel
Juergen Kilb
Antony Pavlov
Sanjeev Premi
Alexander Aring
Daniel Mack