Add empty definitions for mutexes, spinlocks and other stuff from
the kernel to make it easier to reuse code from the kernel.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
print_hex_dump is a standard kernel function, so move it outside
the ubi header files to make it usable for other code derived from
the kernel aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We do not have ubi_do_get_volume_info and ubi_do_get_device_info
and do not need them yet, so remove calls to these functions to fix
compilation.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The CONFIG_PANIC_HANG a part of the U-Boot heritage.
It is used in the barebox code, but there is no mention
of this option in Kconfig files.
Sometimes this option is very helpful, so
let's resurrect it.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The chip select 0 (boot flash) registers are updated by the board
specific code as it is not done by the cpu early initialisation
any more.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The early initialisation of chip select 0 (boot flash) is removed
from cpu initialisation. This removes the dependency on board
base address definition.
Consequently, cpu_init_f is not called in the start-up code but
added to the init call list as cpu_init_r. Also the file
arch/ppc/mach-mpc85xx/fsl_lbc.c is deleted.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Kernel commandline is an important debugging aid when people
ask why their Kernel won't start, so print it unconditionally.
This is done in !dt mode anyway, so also do it with dt.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Our devicetree printing is close to correct dts syntax, so fix
some remaining differences:
- Use an equal sign instead of a colon to separate a poperty name and
a value
- Add a semicolon at the end of properties
- Make sure we do not print a separator for empty properties
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
eth_of_fixup() is passed a devicetree, so use this one instead
of the internal devicetree. This makes sure it also works when
the tree to fixup is not the internal one.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
of_print_cmdline() is passed a devicetree, so use this one instead
of the internal devicetree. This fixes the cmdline printout when
bootm on ARM is used with an external devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds support for the Phytec phyFLEX-i.MX6 board. The phyFLEX-i.MX6
is a system-on-module based on the Freescale i.MX6 SoC. This patch supports
the 1GiB and 2GiB variants on a PBA-B-01 baseboard.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is a fresh UBI import from Linux v3.10
This is done mainly to get fastmap support.
This was tested with the i.MX nand driver, the MXS nand driver and
on CFI NOR flash.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch helps clk-less boards to use device
tree for clock frequency probing (taken from
linux.git/drivers/tty/serial/of_serial.c).
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To update to the latest UBI support from the Kernel first remove
the old UBI support. Without it the update will be even less reviewable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- print error when ioctl fails, not a combined message when one of
ioctl or ubi_attach_mtd_dev failed.
- ubi_attach_mtd_dev() returns the ubi number for success, not 0, so
check for ret < 0 to detect errors.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
No need to force a width of the pointer, so use void *. Also it's
not modified in memory_display, so also add a const.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The i.MX6 uses the same GPMI NAND controller as i.MX23/28 do. This adds
i.MX6 support to the driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The convenience wrapper also contains the bch resources to
get rid of the hardcoded base in the driver in the next step.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Antony Pavlov
Renaud Barbier