3a352025f9sysmocom_rfdsatt: Actuall "port" over to our targetHarald Welte2021-03-28 17:29:27 +0200
d53374daa0create sysmocom rfdsatt as copy of Olimex P103Harald Welte2021-03-28 17:22:48 +0200
2e14822b81Refs #1226. Renamed assert.h to asserts.h to workaround an issue with certain compiler toolchains, where the bootloader's assert.h is mistaken for the c-library's assert.h.
Frank Voorburg
2021-03-22 10:56:12 +0000
8e486e596bRefs #780. Integrate LibOpenBLT C# bindings into the trunk.
Frank Voorburg
2021-03-19 11:27:39 +0000
94aa1b85ddRefs #481. Added support for building the host tools with Visual Studio 2019.
Frank Voorburg
2021-01-08 16:46:20 +0000
b483c7f349Refs #1152. Final changes before the next stable release.
Frank Voorburg
2021-01-07 12:39:01 +0000
6249db7170Refs #981. Added STM32CubeIDE demo programs for the Olimexino-STM32 board.
Frank Voorburg
2020-12-10 10:15:32 +0000
eb8bce018cRefs #981. Added STM32CubeIDE demo programs for the Olimex STM32-H103 board.
Frank Voorburg
2020-12-09 12:04:03 +0000
31ae11134cRefs #981. Added STM32CubeIDE demo programs for the Nucleo-F103RB board.
Frank Voorburg
2020-12-09 09:57:58 +0000
181bb23d0bRefs #981. Added STM32CubeIDE demo programs for the Olimex STM32-P103 board.
Frank Voorburg
2020-12-08 12:00:23 +0000
31c604850eRefs #981. Added STM32CubeIDE demo programs for the Olimex STM32-E407 board.
Frank Voorburg
2020-12-08 10:30:49 +0000
6620a01a8eRefs #981. Added STM32CubeIDE demo programs for the Olimex STM32-P405 board.
Frank Voorburg
2020-12-07 10:36:18 +0000
24b8bf1834Refs #981. Added STM32CubeIDE demo programs for the Olimex STM32-P207 board.
Frank Voorburg
2020-12-04 11:40:09 +0000
3663929da8Refs #981. Added STM32CubeIDE demo programs for the STM32F3-Discovery board.
Frank Voorburg
2020-12-01 11:04:55 +0000
e5c0feb681Refs #404, #778. Added Nucleo-H743ZI demo programs for Keil and IAR.
Frank Voorburg
2020-11-30 12:12:41 +0000
7c5eac6910Refs #778, #981. Corrected the demo bootloader C-startup, fixed a warning in the flash driver and added the S-record for the demo bootloader.
Frank Voorburg
2020-11-25 11:28:05 +0000
c91c5bfe59Refs #404, #981. Added Nucleo-H743ZI demo programs for STM32CubeIDE.
Frank Voorburg
2020-11-23 11:40:37 +0000
ead805b515Refs #404. Reintegrated the branch for STM32H7 port development back into the trunk.
Frank Voorburg
2020-11-19 09:05:25 +0000
7d3780708fRefs #1117. Improved the Kvaser LeafLight CAN driver in LibOpenBLT, based on feedback from Kvaser's code review.
Frank Voorburg
2020-10-23 13:18:31 +0000
255832e67bRefs #981. Added STM32CubeIDE demo programs for the Nucleo-F303K8 board.
Frank Voorburg
2020-10-16 08:54:46 +0000
085940d223Refs #981. Added STM32CubeIDE demo programs for the STM32F0-Discovery board.
Frank Voorburg
2020-10-15 09:07:49 +0000
f60ff55f6eRefs #981. Added STM32CubeIDE demo programs for the Nucleo-F091RC board.
Frank Voorburg
2020-10-14 08:43:07 +0000
2babeb5354Refs #1116. Renamed UART6 to USART6 in the RS232 driver of the STM32F7 port.
Frank Voorburg
2020-10-02 10:34:33 +0000
ba4b437d6fRefs #981. Added STM32CubeIDE demo programs for the Nucleo-L476RG board.
Frank Voorburg
2020-09-24 11:07:04 +0000
aada02a0c7Refs #981. Minor refactoring of the STM32CubeIDE demo bootloaders by removing the AppDeInit() function.
Frank Voorburg
2020-09-24 09:38:25 +0000
668f5f1231Refs #981. Added STM32CubeIDE demo programs for the Nucleo-G071RB board.
Frank Voorburg
2020-09-23 14:21:15 +0000
7ca8703fceRefs #981. Added STM32CubeIDE demo programs for the Nucleo-F746ZG board.
Frank Voorburg
2020-09-22 14:43:35 +0000
936c4bce14Refs #981. Corrected link to the Nucleo-F767ZI/STM32CubeIDE demo programs Wiki page in the doxygen docs.
Frank Voorburg
2020-09-21 15:33:56 +0000
c3e7d31d71Refs #981. Updated STM32CubeIDE debug launch configuration of the Nucleo-F767ZI board demo bootloader for compatibility with Linux.
Frank Voorburg
2020-09-21 15:08:03 +0000
54e93de20dRefs #981. Added STM32CubeIDE demo programs for the Nucleo-F767ZI board.
Frank Voorburg
2020-09-21 11:23:46 +0000
756ef1fb55Refs #1102. Improved SysTick reset in STM32 ports.
Frank Voorburg
2020-09-15 10:59:42 +0000
7dee47c86aRefs #1093. Corrected directory name of the S32K11 demo programs.
Frank Voorburg
2020-08-18 13:36:10 +0000
8ee8f936a3Refs #1084. Updated version numbers in preparation for the next stable release.
Frank Voorburg
2020-07-07 06:23:34 +0000
83364044ddRefs #1003. Corrected deinit of the CAN GPIO pins in the Nucleo-F746ZG demo user program.
Frank Voorburg
2020-06-25 14:35:47 +0000
54ea656f69Refs #1003. Upgraded the ST HAL and USB libraries in the Nucleo-F746ZG demo programs because these include a fix for a problem in the HAL USB driver that had to previously be fixed manually by Feaser.
Frank Voorburg
2020-04-23 10:25:57 +0000
a97abde0edRefs #1003. Reconfigured the CAN GPIO pins in the Nucleo-F746ZG demo programs, such that is works with the Waveshare RS485/CAN shield.
Frank Voorburg
2020-04-23 06:20:47 +0000
88e47a8b23Refs #817. Reintegrating branch where the S32K11 port was developed.
Frank Voorburg
2020-03-26 11:29:46 +0000
d78ae71cdbRefs #816. Added S32K144 EVB demo programs for the IAR Embedded Workbench.
Frank Voorburg
2020-03-20 16:51:43 +0000
eca185dd01Refs #816. Reintegrating branch where the S32K14 port was developed.
Frank Voorburg
2020-03-20 09:31:39 +0000
e117009d0eRefs #963. Updated CAN driver in the STM32F1 port and the HAL drivers in all STM32F1 demo programs for compatibility with the latest ST HAL.
Frank Voorburg
2020-02-28 14:42:46 +0000
c251cf3a6bRefs #963. Updated CAN driver in the STM32F3 port and the HAL drivers in all STM32F3 demo programs for compatibility with the latest ST HAL.
Frank Voorburg
2020-02-27 10:03:06 +0000
fda6c55db5Refs #963.Updated CAN driver in the STM32F2 port and the HAL drivers in all STM32F2 demo programs for compatibility with the latest ST HAL.
Frank Voorburg
2020-02-24 16:01:51 +0000
f0c0b427cbRefs #963.Updated CAN driver in the STM32F0 port and the HAL drivers in all STM32F0 demo programs for compatibility with the latest ST HAL.
Frank Voorburg
2020-02-24 11:56:47 +0000
d54fe54b56Refs #1005. Enabled automatic retransmission of transmitted messages in the CAN driver.
Frank Voorburg
2020-02-21 17:28:37 +0000
8be50f96f1Refs #1004. Corrected return value in function FlashSwitchBlock() of the port template.
Frank Voorburg
2020-02-17 09:54:29 +0000
8533673714Refs #1000. Remap vector table base address at the start of main() instead of having to modify the generated system_xxx.c.
Frank Voorburg
2020-02-15 15:35:38 +0000
cc7a9209f0Refs #992. Reset RCC configuration in the demo bootloader's HAL_MspDeInit().
Frank Voorburg
2020-02-15 10:54:43 +0000
36197ef058Refs #1002. Added makefile comment about how to get the toolpath variable in the 8.3 format on Windows.
Frank Voorburg
2020-02-15 10:20:06 +0000
71efc13166Refs #1000. Remap vector table base address at the start of main.c() instead of having to modify the generated system_stm32g0xx.c.
Frank Voorburg
2020-02-14 17:03:32 +0000
5111034cecRefs #992, #963. Reset RCC configuration before starting the user program and upgraded to the latest version of the STM32G0 HAL drivers.
Frank Voorburg
2020-02-14 16:32:22 +0000
e88477f0d4Refs #962. Renamed UART to RS232.
Frank Voorburg
2020-02-06 16:22:58 +0000
313992a7bcRefs #982. Treat XCP connect command's connection mode parameter as don't care in the demo user programs.
Frank Voorburg
2020-02-05 11:51:11 +0000
76e5d19032Refs #711. Added USB support to the Nucleo-F746ZG demo programs and the STM32F7 port.
Frank Voorburg
2020-02-04 14:25:37 +0000
67415cf853Refs #966. Updated version numbers and host binaries in preparation for the next stable release.
Frank Voorburg
2020-01-09 09:30:38 +0000
fd66f0daedRefs #955. Corrected 29-bit CAN identifier configuration in MicroBoot.
Frank Voorburg
2019-12-10 09:36:03 +0000
7477875190Refs #932. Improved S-record verification when loading firmware data from an S-record file.
Frank Voorburg
2019-11-28 12:21:05 +0000
06f47a3de0Refs #931. Minor improvements to the S-record parser.
Frank Voorburg
2019-11-26 15:32:38 +0000
fa59ddedfbRefs #894. Limited the selectable RS232 baudrates in MicroBoot to those that are currently supported in LibOpenBLT.
Frank Voorburg
2019-11-06 17:15:50 +0000
8a63823005Refs #891. Added XMC4500 compatibility to the XMC4 CAN driver.
Frank Voorburg
2019-09-19 10:57:05 +0000
41a2203627Refs #526. Upgraded GCC ARM demo programs to version 8-2018-q4 of GNU ARM Embedded.
Frank Voorburg
2019-08-27 20:42:11 +0000
2d141add48Refs #526. Upgraded GCC ARM demo programs to version 8-2018-q4 of GNU ARM Embedded.
Frank Voorburg
2019-08-27 20:37:12 +0000
555f7ce0cfRefs #526. Upgraded GCC ARM demo programs to version 8-2018-q4 of GNU ARM Embedded.
Frank Voorburg
2019-08-27 20:17:03 +0000
e0011ae70dRefs #818. Merged branch for STM32G0 port development back into the trunk.
Frank Voorburg
2019-08-13 13:43:27 +0000
8ec8ee7816Refs #521. Updated all IAR demo programs to v7.80 to v8.40 of EWARM.
Frank Voorburg
2019-08-08 16:06:22 +0000
acf99e9c2cRefs #871. Deprecated the LPC2000 and Tricore TC1798 ports.
Frank Voorburg
2019-08-06 15:44:12 +0000
b3b43fed6fRefs #871. Updated list of supported microcontrollers.
Frank Voorburg
2019-08-06 15:36:35 +0000
cadf142286Refs #870. Changed function call XMC_CAN_MO_ReceiveData() to XMC_CAN_MO_Receive().
Frank Voorburg
2019-07-31 13:30:40 +0000
5f3aaf23c9Refs #778. Added support for Keil MDK for ARM to the Nucleo-F767ZI demo programs.
Frank Voorburg
2019-07-30 10:03:52 +0000
03c866a27eRefs #778. Added Keil MDK for ARM support to the Nucleo-F746ZG demo programs.
Frank Voorburg
2019-07-11 09:48:54 +0000
fa4f1b63f2Refs #845. Updated version numbers and Windows binaries in preparation for new release.
Frank Voorburg
2019-07-03 06:21:57 +0000
a9ca24fa0aRefs §844. Added support for single flash bank STM32L4 devices.
Frank Voorburg
2019-07-02 10:13:02 +0000
d03327a199Refs #831. Upgraded all Keil demo programs to the latest version of the Keil MDK for ARM.
Frank Voorburg
2019-06-29 20:42:47 +0000
3bf7de5cf7Refs #843. Moved call to LedBlinkExit() in the demo programs.
Frank Voorburg
2019-06-29 16:28:38 +0000
a4d11856b7Refs #690. Added demo programs for the NXP DevKit-S12G128 board.
Frank Voorburg
2019-06-29 16:05:16 +0000
7dcbeb6edaRefs #823. Added gitignore files to empty directories that are needed to probably build programs.
Frank Voorburg
2019-06-21 10:03:29 +0000
23a2e095c9Refs #822. Changed UART Rx pin mode to floating for the Nucleo-F103RB demo bootloader.
Frank Voorburg
2019-06-19 16:52:33 +0000
b9bec8729fRefs #303. Added support for firmware updates from SD-card to the XMC4700 Relax Kit demo programs.
Frank Voorburg
2019-06-13 10:07:51 +0000
92f83b88a6Refs
Frank Voorburg
2019-04-29 20:43:21 +0000
6b20667a02Refs #792. Reintegrated branch with the trunk after completing the template for new microcontroller ports.
Frank Voorburg
2019-04-17 20:10:12 +0000
bfccabb4e6Refs #787. Some refactoring which was needed for the master/slave add-on module when TCP/IP is used between the host and the master.
Frank Voorburg
2019-04-09 20:02:13 +0000
6248473234Refs #788. Added support for Vector CAN devices (XL driver) to the host tools.
Frank Voorburg
2019-04-09 19:02:40 +0000
d49e7b6888Refs #726. Updated version info and prebuilt binaries for the next release.
Frank Voorburg
2019-01-07 15:41:59 +0000
b589d60e74Refs #434. Reintegrated branch where the STM32F4 port and demos were converted from SPL to HAL.
Frank Voorburg
2019-01-07 12:11:21 +0000
66cdc6543bRefs #734. Corrected preprocessor BOOT_COM_DEFERRED_INIT_ENABLE check in cpu.c.
Frank Voorburg
2018-12-19 16:50:32 +0000
11fe146a86Refs #403. Reintegrated STM32F7 port development branch back into the trunk.
Frank Voorburg
2018-12-17 10:01:58 +0000
4f2f1bd71bRefs #712. Reset firmwareUpdateState to idle before function FileFirmwareUpdateErrorHook() is called, instead of after.
Frank Voorburg
2018-12-11 14:38:31 +0000
c3955cd62eRefs #709. Corrected ExtractProgramSettingsFromCommandLine() function header.
Frank Voorburg
2018-11-27 07:03:57 +0000
73afe21713Refs #708. Added call to fclose() in SRecParserSaveToFile().
Frank Voorburg
2018-11-22 17:56:32 +0000
e9ba4a1d03Refs #659. Made STM32 HAL port includes conditional for the communication interfaces.
Frank Voorburg
2018-10-27 10:56:19 +0000
83e9c0018cRefs #660. Improved CAN connection with PCAN-USB.
Frank Voorburg
2018-10-22 10:01:47 +0000
5ababf911dRefs #618. Added support for splitting the XCP seed/key over multiple packets to make larger seed/key values possible, specifically on CAN.
Frank Voorburg
2018-10-19 20:22:27 +0000
6345a5433dRefs #459. Added easy integration support for the master/slave gateway add-on module.
Frank Voorburg
2018-10-04 05:46:21 +0000