Use the descriptors from ch11.h instead of duplicating them
in usb.h. usb_hub_descriptor now contains a union .u to differentiate
HS hub descriptor from SS hub descriptor.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
{Device,Interface,Endpoint}Requests are currently defined in private
ehci.h but are also useful for other drivers than ehci-hcd. Move them
to usb/usb_defs.h and also add some more class requests.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
All other descriptors have their length field named bLength, except
imported usb_hub_descriptor from Linux uses bDescLength. Adjust the
name to match the others.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Barebox supports up to 8 USB devices attached on a Hub, Linux does 31.
Reduce the USB_MAXCHILDREN define in ch11.h to the Barebox one and
put a comment above.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Linux has an extra include for chapter 11 (Hub Specification) of USB 2.0
spec. We already have a ch9.h, so import the one from Linux.
Barebox specific changes will be patched up later.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Similar to the Kernel multi function this gadget driver is used
for creating a USB device with multiple functions. This is
created and removed with the newly created 'usbgadget' command.
Based on the options it creates combinations of DFU, fastboot
and serial USB functions.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Android fastboot protocol Can be used to update firmware and to
issue other lowlevel commands to the bootloader. This adds a
fastboot implementation based on the U-Boot fatboot code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently we only have version_string which contains information
about the date the binary was compiled and by whom it has been
compiled. This adds a release_string which only contains the
plain release version.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Register DFU as usb_function_instance to make it work with composite
gadgets. Also use this internally for registering as DFU device (with
the 'dfu' command).
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The dfu command parses a string which contains a list of
devices and flags. This format is useful for other users
aswell, so add common helper functions to parse it and
let the dfu command use this format.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This introduces the device parameters:
usbgadget.product
usbgadget.vendor
usbgadget.manufacturer
usbgadget.productname
These variables are used to configure the USB vendor id, product id,
manufacturer name and product name.
Previously these were configured with arguments to the usbserial
and dfu command. The parameters are device static, so it's nice to
configure it somewhere in the environment instead of when calling
dfu/usbserial. Also when other gadget drivers are added we do not
have to duplicate the option parsing further.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This function allows drivers to create a string parameter and
provides access to it via a pointer. Using regular dev_add_param
only allows access via dev_get_param().
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We can now detect changes in the USB device hierarchy properly, so
the 'force' option to the usb command is no longer necessary. We just
scan the busses each time the usb command is called.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds U-Boot 'usb tree' command functionality to barebox.
Here is an example output:
1 ID 0000:0000
| u-boot EHCI Host Controller
|
+-2 ID 05e3:0606
| USB2.0 Hub
|
+-3 ID 10c4:ea60
| Silicon Labs CP2102 USB to UART Bridge Contr P-00-00669
|
+-4 ID 05e3:0606
| | USB2.0 Hub
| |
| +-5 ID 05e3:0608
| | | USB2.0 Hub
| | |
| | +-6 ID 0d8c:000c
| | C-Media USB Headphone Set
| |
| +-7 ID 0d8c:000c
| C-Media USB Headphone Set
|
+-8 ID 0846:1040
NETGEAR NETGEAR FA120 Adapter
The tree view is enabled with 'usb -t'
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For situations when we don't know the desired mode for the OTG port
we register a otg device which has a mode parameter to specifiy the
desired mode on the command line.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We have USB_SPEED_* definitions as macros in usb_defs.h and as an enum
in ch9.h. The defines in usb.h correspond to hardware bits in the
ehci controller. Get rid of them and keep the hardware independent
enums.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently we have two conflicting definitions of struct usb_config_descriptor
and struct usb_interface_descriptor in the tree. This is because the USB code
uses additional fields in the structs for internal housekeeping. Add
struct usb_interface and struct struct usb_configuration with the housekeeping
data and embed the corresponding hardware structs into them. This frees the
way to use the definitions from ch9.h in the next step.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Yes, we already have roundup/rounddown. Unlike these macros
round_up/round_down are optimized to (and only work with)
power-of-2 arguments. It's a poor name, but kernel code needs
it, so add it to barebox aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
During debugging it sometimes helps to me even more verbose. This
adds an additional debug level for this. Also we remove an already
existing pr_vdebug definition in the USB gadget u_serial driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
use in devinfo Protocols
Tested today on qemu with all the GUID translated
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch imports i2c_smbus_{read,write}* functions from linux-3.15.
Here is a quote from linux.git/Documentation/i2c/smbus-protocol:
If you write a driver for some I2C device, please try to use the SMBus
commands if at all possible (if the device uses only that subset of the
I2C protocol). This makes it possible to use the device driver on both
SMBus adapters and I2C adapters (the SMBus command set is automatically
translated to I2C on I2C adapters, but plain I2C commands can not be
handled at all on most pure SMBus adapters).
So having i2c_smbus_{read,write}* functions in barebox makes
porting of linux i2c client drivers much easier as many drivers rely on
these smbus functions.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With upcoming EFI payload support the efi.h file will diverge
from the kernel, so move it from include/linux/ to include/
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
EFI uses 16 bit character strings. Add beginning support for this.
Since barebox uses 8 bit strings internally we need conversion functions
to convert between 16 bit and 8 bit strings.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add a devname field to struct console_device so that the device
name can be set by the driver. This makes it possible to have
persistent device names.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some devices may have a much more efficient way to output strings
rather than single characters. Let console devices implement a
callback for this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
unsigned long is 64bit wide on some architectures. Make IPaddr_t a
typedef to uint32_t to make sure it's 32bit wide.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
remove unused function declarations and definitions:
- vallocc is #if 0 in source code
- pvalloc is defined but not used
- cfree is defined but not used
- malloc_usable_size is unused
- mallopt is not defined
- mallinfo is not defined
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This driver is based on Linux 2.6.39 8139too driver.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The doxygen documentation is long outdated. Remove it. It will
be replaced with sphinx based documentation later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There is no need to check the card-detect status
for non-removable devices.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We do not have usb_get_dev_index() function, so remove this declaration.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
I assume I am the only person knowing that barebox is able to
merge devicetrees. This feature seems broken for a while now since
trying to merge devicetress results in:
unflatten: too many end nodes
Remove this feature to save the complexity.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Even when both the ethernet controller and the phy support certain
features a board may have additional limitations. Allow specifying
it in the devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The of_* commands take devicetree nodes as parameters. Add a
devicetree completion function to ease passing nodes to these
commands.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some boards have to initialize the PMIC before other devices can
be initialized. This requires three levels of initcalls: one level
in which the PMIC is probed, one in which the board can call mc13xxx_get()
and the third one to initialize the PMIC dependent devices.
Allow to register a callback which is called once the PMIC is initialized.
This way mc13xxx_get() is no longer necessary and the number of required
initcalls levels is reduced to two.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
gcc 4.8.3 throws the following error
include/mfd/syscon.h: In function 'syscon_base_lookup_by_pdevname':
include/mfd/syscon.h:22:1: error: parameter name omitted
static inline void __iomem *syscon_base_lookup_by_pdevname(const char *)
Fix it by adding the name to the function prototype.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add stripped sown version of the reset controller
framework from the Linux kernel.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In barebox network packets always go out at the current ethernet
device and are expected to be received from the current interface.
This has some side effects. When for example an NFS is mounted when
one interface is active and the interface is changed afterwards the
NFS packets leave the new interface, but the NFS server won't be
reachable there.
Instead of changing the whole network traffic to the current ethernet
interface we now initialize a network connection with the current
network interface, but then the connection will continue to use that
interface even when the current interface is changed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch does probably too much, but it's hard (and very
cumbersome/time consuming) to break it out. What is does is this:
* each command has one short description, e.g. "list MUX configuration"
* made sure the short descriptions start lowercase
* each command has one usage. That string contains just the
options, e.g. "[-npn]". It's not part of the long help text.
* that is, it doesn't say "[OPTIONS]" anymore, every usable option
is listed by character in this (short) option string (the long
description is in the long help text, as before)
* help texts have been reworked, to make them
- sometimes smaller
- sometimes describe the options better
- more often present themselves in a nicer format
* all long help texts are now created with BUSYBOX_CMD_HELP_
macros, no more 'static const __maybe_unused char cmd_foobar_help[]'
* made sure the long help texts starts uppercase
* because cmdtp->name and cmdtp->opts together provide the new usage,
all "Usage: foobar" texts have been removed from the long help texts
* BUSYBOX_CMD_HELP_TEXT() provides the trailing newline by itself, this
is nicer in the source code
* BUSYBOX_CMD_HELP_OPT() provides the trailing newline by itself
* made sure no line gets longer than 77 characters
* delibertely renamed cmdtp->usage, so that we can get compile-time
errors (e.g. in out-of-tree modules that use register_command()
* the 'help' command can now always emit the usage, even without
compiled long help texts
* 'help -v' gives a list of commands with their short description, this
is similar like the old "help" command before my patchset
* 'help -a' gives out help of all commands
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The old output of "help" was just producing a long list, that usually
scrolled of the screen (even on a X11 terminal). This list is more
compact, and also sorted by groups.
The old output format (plus grouping) is now available with 'help -v'.
Example:
Information commands:
?, devinfo, help, iomem, meminfo, version
Boot commands:
boot, bootm, go, loadb, loads, loadx, loady, saves, uimage
...
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We use 'u32' type in stdlib.h so we have to include types.h.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Clock gates having the CLK_GATE_HIWORD_MASK flag set use the upper 16
bits of the register as a "write enable" mask for the value in the
lower 16 bits.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a clk_gate_flags argument to clock gate creation functions
to allow the introduction of new clock gate modifiers.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Provide minimal regulator support. Only supported operations are enabling
and disabling regulators. Association of devices with their regulators is
limited to devicetree only. If regulator support is disabled the API expands
to static inline stubs so consumers can still use the API.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
barebox used to have its own include/dt-bindings with files copied
from the corresponding kernel files. Use upstream dt-bindings directly
instead.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When a mtd device can have bad blocks we want to create a
bb device, so do this automatically. This allows us to
drop bb device creation from the environment.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This refactors the code so that we get a mtd_add_bb which can
be used to create a bb dev on a mtd_info.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The purpose of envfs_register_partition is to print an error
message when the partition does not exist. Print an error message
from generic code instead and drop this function.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The cast prevents us from doing proper error checking.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The current implementation fakes a memory-mapped I/O device
at 0x3f8 and 0x2f8, then uses platform read/write functions
to do the actual reading and writing. These platform functions
only exist for the x86 platform; better to move the I/O
routines into the driver and have the driver request I/O ports
using request_ioport_region.
Signed-off-by: Michel Stam <michel@reverze.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Rework the current framework so that I/O mapped I/O resources are
also possible.
Signed-off-by: Michel Stam <michel@reverze.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a convenience function to register a MAC address device
parameter. The only current user is converted to use it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is needed so that the IPU framebuffer scanout cannot be
starved by VPU or GPU activity.
Some boards like the SabreLite and SabreSD seem to set this in
the DCD already, but the documented register reset values do not
contain the necessary settings.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We have dev_add_param_enum() now, so use it for the mode_name
setting. Also drop the special case for single mode framebuffers,
just add the mode_name parameter for this case aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
And use it inside struct fb_info. This struct has the advantage
that the supported modes can be passed around in a single pointer.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This updates the clk-divider to Kernel code, but without power-of-two
divider support which we do not need yet. This also adds table based
divider support to the divider.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Creating menus from the shell using the regular 'menu' command is rather
complicated. This adds a 'menutree' command which creates a menu from
a directory structure. In the directory structure each directory corresponds
to a single menu entry. The directory contains the following files:
title - A file containing the title of the entry as shown in the menu
box - If present, the entry is a 'bool' entry. The file contains a variable
name from which the current state of the bool is taken from and saved
to.
action - if present this file contains a shell script which is executed when
when the entry is selected.
If neither 'box' or 'action' are present this entry is considered a submenu
containing more entries.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add DDR3 SPD verification support for use by the PPC 8xxx DDR driver.
This is based on the equivalent files from U-Boot version git-be937b5.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This macros are used in exported from linux TI DaVinci code.
Also this macros are used in MIPS cache support code.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
MTD internal API presently uses 32-bit values to represent device
size. This patch updates them to 64-bits but leaves the external API
unchanged.
In general, changing from 32-bit to 64-bit values cause little
or no changes to the majority of the code with the following
exceptions:
- printk message formats;
- division and modulus of 64-bit values (mtd_div_by_wb,
mtd_div_by_eb may be used in some of such cases).
Was tested on phyFLEX i.MX6.
Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com>
Signed-off-by: Grigory Milev <g.milev@sam-solutions.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The defaultenv-2 has ifup support as a shell script. This patch
replaces it with a command which is more robust, can be called
from C and now can also bring up all configured interfaces.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The default nand_read_subpage implementation returns -ENOSUPP, so we have
to make sure that barebox never uses this implementation. By setting the
NAND_SUBPAGE_READ flag to 0x0 we ensure NAND_HAS_SUBPAGE_READ() never returns
true and also give the compiler a chance to optimize away some unused code.
subpage reads are a rather exotic feature even in Linux. It is only used on
largepage NANDs with soft ecc. Even if we have this case it needs non page
aligned reads to actually profit from this feature.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Hattink, Tjalling [FINT] <T.Hattink@fugro.nl>
Compared to devfs_add_partition which adds a single partition
devfs_create_partitions creates several partitions at once. One nice
benefit is that this simplifies appending partitions because the start
of the latter partition doesn't need to be specified explicitly.
Also dev_add_bb_dev() is called by the new helper if the bbname is
specified for a partition.
Note that adding partitions is also more flexible now (also via
devfs_add_partition) because negative values for offset and size now
have a proper meaning instead of creating broken partitions.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The string pointed to isn't modified, so declare it as const.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The value is only used to assign to a (*struct cdev)->flags which is an
unsigned int and it is passed as fourth parameter of mtd_add_partition which
is an unsigned long.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We can compile barebox for multiple boards at once, but currently
they all share a single default environment. This patch adds a
defaultenv_append() which boards can call to customize the default
environment during runtime. Each board now generate default environment
snippets using bbenv-y and add them during runtime with defaultenv_append()
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Devicetrees specify the keyboard codes for the gpio-keys
driver, so add a table to translate them into something
barebox can use.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently the version defines reflect the digits in the version
number. MMC_VERSION_4_41 is defined as 0x441 and MMC_VERSION_4_5
is defined as 0x405. This results in MMC_VERSION_4_5 < MMC_VERSION_4_41
becoming true which was surely not intended. Fix this by
redefining the versions as 0x<major><minor><micro>. This makes the
string generation more complicated but makes versions comparable
again.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- configure the MC34708 properly so that USB can work
(the sequence is taken from u-boot)
- add the required defines to the mc13xxx include file
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This imports the Marvell mbus driver from Linux. The mbus is the
main downstream bus found on all Marvell Orion SoCs. The driver
deals with re-configurable address windows which are currently
parsed from DT. Also enable the driver as default on all MVEBU
SoCs. While at it, also reorder drivers/bus/{Kconfig,Makefile}
alphabetically.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This implements a of_phy_device_connect to allow DT enabled drivers
to connect to a PHY device by using the PHY's DT node only. It
currently assumes that each PHY node is a child of the corresponding
mdio bus.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Similar to mount(8) the barebox command mount now supports passing a string
to the file system driver via -o.
This is used in the next commit to let the user specify port numbers for
nfs mounts.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
ntohl always converts 32 bits even on archs where sizeof(long) == 8.
"ntoh32" is a much more intuitive name here. Also the name of the 64 bit
variant that is also added isn't questionable.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is needed for nfs3 support as some types became bigger compared to
nfs2.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On some architectures (e.g. alpha, amd64, arm64, ia64, s390x, mips64)
sizeof(ulong) is 8 which made net_read_uint32 actually read too much and
even returned the wrong value on big endian machines.
(Note the second issue isn't that critical though, because the only
architecture from the list above that uses big endian byte order is s390x
...)
Also change the argument to void * because the pointer is not necessarily
properly aligned.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This allows to load all the lowlevel init code, including the
uncompressor, inside SRAM and not just the bare init part. This is
useful when pbl is used as a first-stage bootloader but is loaded by an
external firmware.
Signed-off-by: David Vincent <freesilicon@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
i2c/spi devices in the devicetree often come with a "vendor,device"
comaptible string. These do not match in barebox, so add a
device_match_of_modalias function which does exactly that.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Boards register a fixup for a phy without checking if phy support
is enabled. To fix compilation without phy support add a static
inline wrapper for phy_register_fixup_for_uid.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
default_environment_path only exists when CONFIG_ENV_HANDLING is enabled.
Boards would have to #ifdef this if they wanted to use
default_environment_path. Use accessor functions instead which can
be ifdeffed on a single place.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Linux specifies the linux,stdout-path property in the /chosen node
in the devicetree. Unfortunately this is ignored in most cases.
For cases in which barebox uses this property for its own use we
translate this into a Linux boot arg with:
- the console name provided by the serial driver
- the the instance from the 'serial' alias
- the baudrate from the actual baudrate.
So with this it's for devicetee enabled boards no longer necessary
to manually assign a console= parameter. Should a user not want
to use the automatically assigned parameter it should do:
global.linux.bootargs.console=
in the environment.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The eMMC and the SD-Card specifications describe the optional SET_DSR command.
During measurements at our lab we found that some cards implementing this feature
having really strong driver strengts per default. This can lead to voltage peaks
above the specification of the host on signal edges for data sent from a card to
the host.
Since availability of a given card type may be shorter than the time a certain
hardware will be produced it is useful to have support for this command (Alternative
would be changing termination resistors and adapting the driver strength of the
host to the used card.)
Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
eMMC is available up to version 4.5 but the
correct version is not decoded. Change version
definitions to support more minor verions, add
missing versions and parse the minor versions from
ext_csd.
After this, card detection code and devinfo reports
correct versions.
Handling is inspired by u-boot code.
Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The common bootm code used to load uImage contents to SDRAM
before calling into the handlers if possible. This makes the
handlers complicated since they have to handle many cases. Instead,
introduce a helper to load the os after the handlers have figured
out a good load address.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch includes update i.MX51 template and porting some barebox
DTS files to use new template.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
miitool without arguments will try to show status for all phys.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
ubiformat needs the subpagesize to work correctly. The kernel uses
sysfs to pass the subpagesize, but in barebox we have the possibility
to extend struct mtd_info_user. Add a corresponding field and use it
in ubiformat.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
barebox does not need the screen size directly, but we pass the
framebuffer to Linux via simnplefb it is desirable to pass the
full size of the framebuffer. Default to calculated values from
the screen resolution.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sometimes execution of a function has to be delayed, for example
when a backlight can only be turned on when the picture has stabilized.
To help in such situations add a convenience function around the poller
stuff to call a function after a delay.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With this phy_device_connect only registers a phy device if it wasn't
registered already. This allows us to register phy devices outside
of ethernet drivers. phy_device_connect will now pick up an already
registered phy given that it's not attached to another ethernet device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If an ethernet device already has a phy in phy_device_connect all we
have to do is to start autonegotiation. Do this early and bail out
so that for the rest of the code it's clear that we have to search for
a phy device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds the crc32 command to be build
as host and optionally as target tool.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We currently have functions to add a device based on function parameters.
This adds the corresponding functions to add resources to a device without
registering the device itself. This is useful to manipulate devices before
registering them.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of requiring a device pointer, add a functions to select
the pinctrl state based on a device node.
The AM33xx cpsw devicetree description has several subdevices with
pinctrl information attached to them. In barebox we do not handle
the subdevices as distinct devices, so the pinctrl is never configured
correctly and the mdio bus subdevice stops working. This patch makes
it possible to configure the pinctrl without having a device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Also import related functions gpio_request_one() and
gpio_free_array().
This commit imports code from linux 3.7 as
the more recent linux kernel versions use gpiolib descriptors,
see this commit for details:
commit 372e722ea4dd4ca11c3d04845e11cbc15f32144c
Author: Alexandre Courbot <acourbot@nvidia.com>
Date: Sun Feb 3 01:29:29 2013 +0900
gpiolib: use descriptors internally
Make sure gpiolib works internally with descriptors and (chip, offset)
pairs instead of using the global integer namespace. This prepares the
ground for the removal of the global gpio_desc[] array and the
introduction of the descriptor-based GPIO API.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
See linux.git/include/linux/gpio.h and
linux.git/Documentation/gpio.txt for details.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The current implementation of the bootloader specification depends on the
hardware name and the name of the device in /dev to match. As the default
hardware name is mciX and the device name is diskY the bootloader spec
cannot be used as is.
This patch implements a way to overwrite the device name similar to what is
possible for the imx-esdhc driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This add barebox versions of of_clk_init for parsing and registering
clock providers from DT. Also, a macro CLK_OF_DECLARE is added, that
allows to put init callbacks into its own section that can be linked
in the binary.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a macro for linker scripts to place DT clock provider table.
While at it, also add ALIGN(8) to DTB macro and fix a whitespace issue.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
At least for debugging purposes it is helpful to determine the current
direction for a given GPIO. Add a callback to gpiochip, to allow to
get it.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A lot of files rely on include/driver.h including include/of.h (and
this including include/errno.h. include the files explicitly so we can
eventually get rid of including of.h from driver.h
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support to configure the active framebuffer for the kernel through
device tree.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If drivers want to fixup their specific instance they need some context
to know which instance they have to fixup.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support for framebuffers with noncontiguous horizontal lines.
Video drivers can set this value if the hardware requires it.
In case a driver does not set it, the current value of
xres * (bpp / 8) is used instead.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
the cdev for a given directory can be determined by get_cdev_by_mountpath().
Use this function and remove the cdev argument from blspec_scan_directory().
Also, export the function to make code possible which boots the bootloader
spec entries found in directories.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>