This will allow us to implement cache maintenance in a platform
agnostic way.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It is needed for container_of() and this header falls
over if we change the include order.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It is required for Rockchip SoCs where clock settings registers have
write-enable mask in high word.
Signed-off-by: Andrey Panov <rockford@yandex.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It is required for Rockchip SoCs where clock settings registers have
write-enable mask in high word.
Signed-off-by: Andrey Panov <rockford@yandex.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some SoCs have special device pins for external reset signals.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sometimes it's useful to test if a memory operation works or
aborts. This adds data_abort_mask() to ignore data aborts and
data_abort_unmask() to enable them again. This is used in the
next step for the 'md' command so that illegal addresses just
show 'xxxxxxxx' instead of crashing the system.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a function to parse a full cmdline partition string. The
addpart command is switched to use this function.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The return size should be loff_t to support partitions bigger
than 4G. Also use const for the devname and endp.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
the bb devices which are created in add_mtd_device() must be removed
in del_mtd_device(). Also remove deletion of the bb devices in the
mtdparts-add environment file.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will use the device name as regulator name
with the same Algo as clkdev for lookup
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
All the smcs family chips 91c94, 91c96, 91c100, 91c111 share almost the
same behavior and register sets. The noticeable exceptions are coped
with in this patch, ie :
- 91c94 and 91c96 only have an internal 10 Mbps phy
The registers used for phy discovery on later chips will corrupt the
91c96 state.
- 91c94 and 91c96 have a control and config register quite different
from their 91c1xx conterparts
A platform data user defined couple of registers is introduced. If
these values are 0, 91c1xx legacy behavior is assumed.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Smc network IPs can be wired up in different funny ways. For example the
lubbock pxa25x development platform wires all address lines shifted by
2, ie. bus A2 is smc91c96 A0, bus A3 is smc91c96 A1 etc ...
In order to cope with the different possible combination, add a shift
parameter for addresses.
By default, the old behaviour using the 32 bit accesses is kept.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This function is only used in drivers/usb/*.
It is equivalent to mdelay().
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The include/common.h is still cluttered (although much better than
U-Boot). It contains various utility macros that originates
in Linux. Move them to the original place, include/linux/kernel.h,
to slim down include/common.h.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In Linux, these macros are defined in include/asm-generic/bug.h.
To tidy up common.h, move BUG(), BUG_ON(), WARN(), WARN_ON() there.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In Linux, the macros BUILD_BUG_ON* are defined in include/linux/bug.h.
To tidy up common.h, move BUILD_BUG_* there.
MAYBE_BUILD_BUG_ON is not used in barebox and it was removed from Linux
long time ago. Drop it from barebox, too.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The parameters ECC Strength, BadBlockMarkerByte and BadBlockMarkerStartBit in
the FCB structure depends on the nand chip's pagesize and oobsize. Instead of
hardcoding these values into the imx6 bbu handler calculate these values on the
fly. Therefore we export the necessary functions from the nand_mxs driver to
use them in the bbu handler.
Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Linux uses SHRT_* instead of SHORT_*. The <limits.h> of C does
the same. Let's follow this standard.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Linux defines *_MAX, *_MIN macros in include/linux/kernel.h.
Let's follow this way to slim down the common.h.
This change should have no impact because include/common.h already
includes <linux/kernel.h>.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Most of the implementations of PUTC_LL() takes "char"
(some take "int"), not "unsigned char".
Moreover, puts_ll() takes an argument with "const char *" type.
Let's drop "unsigned" from the prototype of putc_ll().
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The driver is taken from the Linux kernel, with the following changes :
- all DMA removed
- all asynchronous handling removed, including the interrupt handler,
and the asynchronous state handling
- pxa armada support removed
Most the kernel structure was kept, to ease up future fixes integration
from the kernel driver.
The driver is tested on a pxa3xx system development
board (aka. zylonite), and reading, writing, erasing, and bad block
management were tested.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can use dynamic number id with specific devname
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Looks like I am also highly addicted to Linux...
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This file originates in Linux. Linux has it under include/linux/
directory since commit dccd2304cc90.
Let's move it to the same place as well in barebox.
This commit was generated by the following commands:
find -name '*.[chS]' | xargs sed -i -e 's:<sizes.h>:<linux/sizes.h>:'
git mv include/sizes.h include/linux/
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
broken since
commit ed6e965824
Author: Sascha Hauer <s.hauer@pengutronix.de>
resource: Let dev_request_mem_region return an error pointer
Introduce dev_request_mem_region_err_null
only used on platform like at91 where the resource address conflicts
with errno PTR.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds simple console support to the PBL which makes it
possible to print more complex messages in the PBL than just
strings or hex numbers. For now puts_ll is used to print the
messages, so it depends on CONFIG_DEBUG_LL which makes it
more a debugging option. However, this could be extended later
to get regular output from the PBL if desired.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The netconsole needs to be able to deny activation when the network
has not been enabled. Add an optional callback to the console for
this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Implement the standard FS ops for writing/manipulating
efivars.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A proper GUID is needed to namespace all sorts of
things, most prominently persistent variables.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This allows to actually reset the system from barebox
instead of dropping back into the EFI firmware.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Thanks to the wonders of UEFI we have to walk down the
device path all the way until we arrive at the device
we got this path from...
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
No architectue implements its own gpio_is_valid() function, so move
the only existing implementation to include/gpio.h where it's available
for all users.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit adds support for Marvell's 88E1543 PHY chip. This chip is
almost identical to the 88EE1545, except the 88E1545 supports QSGMII
and the 88EE1543 supports SGMII.
Therefore, the same configuration function is used for both PHYs. For now,
the only initialization provided for the 88EE1543 is the LED setup.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit adds support for Marvell's 88E1545 PHY chip. In particular, this
allows to support QSGMII interfaces.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This could previously only be done with 'devinfo global'. While
this is still possible this adds a more direct access via the
globalvar command. This variant also adds a '*' in front of
the variable if the corresponding non volatile variable exists.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds (back) support for non volatile variables. Non volatile
variables are variables which are stored in the environment over
reboot. They are used in the same way as the global variables, but
with a 'nv' command and device. The variables are stored under
/env/nv/, one variable per file. Adding a nv variable automatically
adds a global variable with the same name. Changing a nv variable
also changes the same global variable, but not the other way round.
This allows for example to configure the username as:
nv user=sha; saveenv
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sometimes mbr is erroneously recocognised as FAT partion. Due to this the mbr
partition parser is not being called and the partitions on the media are not
detected. This patch should fix the problem. The checking is done as in the
linux kernel.
I have seen the problem using usb sticks. Although partitioning and formatting
them under linux. The file system type field in the mbr remains there which
causes the wrong detections as FAT32 type and not as mbr.
Signed-off-by: Zahari Doychev <zahari.doychev@linux.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds xz decompression support from the kernel. Both compressing
the barebox binary with xz and decompressing xz files on the commandline
is supported.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some SoCs are able to detect if they got reset
in response to an overtemperature event.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This brings in the generix PHY framework from Linux.
I tried to strip it down as much as possible while
keeping it useful.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Function to enable and register a disabled device.
The devices can be registered using the
device node with of_device_enable_and_register() or
with the device node name/path by using the
of_device_enable_and_register_by_name() function.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
dev_add_param creates a new parameter so it makes more sense to
return it than to return an error code. Since the return value
is hardly ever checked this is only a small patch.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The struct device_d * in struct filep is never of interest, instead
it is always converted to a struct fs_device_d *, so simplify the code
by storing the struct fs_device_d * directly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
So that PCI devices hang down from bridges and root
bridges down from the PCI host controller when
calling devinfo.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some host controllers provide a prefetchable
memory area and devices will prefer this for
some of their BARs.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Without console support we need a static inline version of
pr_print and dev_printf, otherwise we get link errors.
Reported-by: Kevin Du Huanpeng <u74147@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>