For memory reaching the end of the address space
phys + bank->size overflows to 0. Fix this by right shifting
phys and bank->size before adding them.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Sean Cross <xobs@kosagi.com>
- If we have no memory registered in mmu_init() it's a critical bug.
panic in this case.
- If we do not have a ttb when dma_alloc_coherent or remap_range is
called it's also a critical bug. Panic in this case.
- if find_pte is called with an address outside our memory banks dump
the memory banks and the address to give more clue what went wrong.
Also add some hints what might went wrong to the code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The commit
ARM: Make ENTRY_FUNCTION more robust
changed the behaviour of the ENTRY_FUNCTION. For the Socrates the call to
__barebox_arm_head() was not removed. Do so now otherwise the Socrates will
not be able to boot barebox.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The mx31moboard is used on the marXbot, Eyebot and Footbot robot.
Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We can compile barebox for multiple boards at once, but currently
they all share a single default environment. This patch adds a
defaultenv_append() which boards can call to customize the default
environment during runtime. Each board now generate default environment
snippets using bbenv-y and add them during runtime with defaultenv_append()
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When booting from SD Card we don't want to load an env
from EMMC.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is a squashed commit of the following downstream
commits:
- Set CS0_END in MMDC0_MDASP to 32Gb (4GB)T
- Fix writes to MMDC0_MDSCR
- Enable bank interleaving (BI_ON) and set write
additional latency (WALAT) to 1 cycle in MMDC0_MDMISC
- Set ARCR_DYN_JMP=1 and ARCR_DYN_MAX=15 in MMDC0_MAARCR
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This was broken with commit 2a1f5f802e
"ARM: rename boards to more consistent naming"
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sets up MSELECT to let main CPUs talk to peripheral devices and starts
high performance A9 CPU cluster.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Allows to talk to external PMIC devices to bring up CPU rail.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch gates the clocks to GPU, IPU, and VPU units by default,
significantly reducing the VDDSOC power draw while barebox is running.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
SYSCON3 register is not used in the barebox, so remove driver for
this register entirely.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Most devices relevant for barebox like sd/emmc/network/uarts
work. Devicetree contains several undefined drive strength settings,
these can be fixed once the kernel has sorted this out.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Adding minimal support for the UDOO board.
For more information about the board: http://www.udoo.org/
Signed-off-by: Raphael Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For proper startup we need to give clocks and IO signals some time to
stabilize. Tegra2 got away without them, but Tegra3 seems to be a bit
pickier.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Lowlevel code runs when not relocated yet, so we have to make extra sure
not to emit jump-tables with absolute adresses when evaluating switch
statements.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For computer modules the naming standard is to have
a single board directory named after the module and
have all the baseboard support beneath it.
Also change the CONFIG name, as we may want to build
all the baseboards at once.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Steffen Trumtrar
Philippe Rétornaz
Uwe Kleine-König
Lucas Stach
Michael Olbrich
Philipp Zabel
Lucas Stach
张忠山
Alexander Shiyan
Raphaël POGGI