The Globalscale Guruplug board is a small NAS-type plug platform that
uses a Marvell Kirkwood SoC.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Marvell Kirkwood SoCs are based on a ARMv5 compatible core designed by
Marvell, and a large number of peripherals with Marvell Dove, Marvell
Armada 370 and Marvell Armada XP SoCs. The Marvell Kirkwood are used
in a large number of consumer-grade NAS devices, for example.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Kirkwood Marvell SoC uses a Marvell-specific implementation of an
ARMv5TE compatible ARM core, the Feroceon. This patch introduces a
Kconfig option that allows to select this CPU type.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For CCMX51-boards now we do not use ESDCTL, but actual command for
adding memory is missing. This patch fix this issue.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Tegra arch will be fully based on device tree and most boards
shouldn't need anything more than the generic drivers and arch code.
This adds generic tegra20 board support, but since we currently have
no way to combine an image with a devicetree other than compiling it
into the single image we also add Colibri T20 on Iris support here
and add a defconfig for it.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There are more than Armada 370/XP in Marvell MVEBU SoC familiy. To avoid
irritation with source file nameing, we rename setup source file for
Armada 370/XP from core.c to armada-370-xp.c.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The SolidRun CuBox is a small cubic platform based on the Marvell
Dove SoC. There is nothing more than a console, yet.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit adds minimal support for the Marvell Dove SoC (88AP510) as
first SoC of the Marvell Orion family. Orion SoCs have a different timer,
therefore current mach-mvebu and Armada 370/XP Kconfig and Makefiles are
slightly modified and a new clocksource drivers is added.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Armada XP GP platform is an evaluation platform designed by
Marvell, that uses the MV78460 quad-core SoC from the Armada XP
family.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Mirabox is a platform manufactured by Globalscale, and based on
the Marvell Armada 370 SoC.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The OpenBlocks AX3 platform is manufactured by PlatHome and uses the
MV78260 dual-core SoC from the Armada XP family.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When a ARCH_MVEBU platform is selected, generate barebox.kwb and
barebox.kwbuart images from barebox.bin, using kwbimage.
barebox.kwb is generated by executing kwbimage on the board
kwbimage.cfg file, and is therefore designed to be booted from the
default boot media of the board, as defined by kwbimage.cfg (typically
a NAND flash or SPI flash).
barebox.kwbuart is generated by executing kwbimage on the board
kwbimage.cfg file, but by overriding the boot media to be UART. This
image is suitable for usage with the kwbtool and is generally useful
for recovery purposes.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Squashed this fixup:
arm: ensure the build doesn't fail when kwbimage lacks the binary blob
mach-mvebu images for Armada 370 and Armada XP SoC require a DDR3
training code which should be extracted from existing bootable images
for the relevant board. When such binary blob has not been extracted,
the build of the .kwb and .kwbuart images will fail. This is annoying
as it makes the build of all Armada 370/XP defconfig fail, which can
be a problem for automated builds.
This proposal makes the failure of kwbimage not a fatal failure for
the build process, and shows a warning. The user therefore sees:
====================================================================
KWB barebox.kwb
Didn't find the file 'plathome-openblocks-ax3-binary.0' in '/home/thomas/projets/barebox' which is mandatory to generate the image
This file generally contains the DDR3 training code, and should be extracted from an existing bootable
image for your board. See 'kwbimage -x' to extract it from an existing image.
Could not create image
WARNING: Couldn't create KWB image due to previous errors.
KWBUART barebox.kwbuart
Didn't find the file 'plathome-openblocks-ax3-binary.0' in '/home/thomas/projets/barebox' which is mandatory to generate the image
This file generally contains the DDR3 training code, and should be extracted from an existing bootable
image for your board. See 'kwbimage -x' to extract it from an existing image.
Could not create image
WARNING Couldn't create KWB image due to previous errors.
====================================================================
The only drawback is that barebox-flash-image, which normally points
to barebox.kwb, becomes a stale symbolic link.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit adds minimal support for the Armada 370 and Armada XP SoCs
from Marvell.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Without this patch after compiling barebox
for a PowerPC board we have 'git status'
output looking like this:
# Untracked files:
# (use "git add <file>..." to include in what will be committed)
#
# arch/ppc/boards/pcm030/barebox.lds
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
See also:
commit eb84709192
Author: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon Mar 25 15:18:38 2013 +0100
clk: remove unused __clk_[get|put]
This is some unused code resulting from copying stuff from
the kernel. Remove it.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a pinctrl driver for the Tegra 20 line of SoCs. It only
supports the three basic pinconfiguration settings function mux,
tristate control and pullup/down control.
The driver understands the same devicetree bindings as the Linux one,
unimplemented pinconfiguration options will be ignored.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The missing 'break' statement lets look an i.MX23 like an i.MX28.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Ingenic JZ4740, JZ4755 and JZ4770 SoCs use
the same IP core for UART interface. This IP core
is NS16550-compatible, but it needs small workaround.
This commit moves the UART code for Ingenic SoCs
from board level to machine level. So the code
can be reused for different boards or even
different SoCs.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This partly reverts:
commit 697e02b74f
Author: Alexander Shiyan <shc_work@mail.ru>
Date: Tue Jan 22 15:08:31 2013 +0400
ARM: ccmx51: Remove SDRAM size settings
This patch removes SDRAM memory size setting from board due
to auto detect last one by ESDCTL.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The board originally configured the SDRAM controller for the
maximum size and detected the usable SDRAM size by reading the
board id. This became broken after switching to automatic SDRAM
size detection by reading back ESDCTL values.
This patch brings back the old behaviour.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some boards setup more memory than they actually have. The real memory
size can then be detected later for example by reading a board id.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In commit ad09b59f8b "ARM i.MX31: give
register base addresses a proper MX31_ prefix", the IOMUX GPR setup
to enable USBH2 was replaced with an incorrect source register.
Instead of reading the GPR register, USBOTG HWHOST is used as rmw source,
which contains 0x10020001.
Beside the intended GPR[11] setup ("Enable USBH2 signals on AudioPort 3 and
AudioPort6"), this erroneously also sets
GPR[28] enable USBOTG loopback
GPR[17] override DSR_DCE1 with USBOTG_DATA4
GPR[0] select FIR DMA requests instead of UART2 DMA
Beside breaking UART2, it probably also broke some UART1 and USB OTG setups.
Fix this and replace the address with the appropriate defines.
Signed-off-by: Andreas Pretzsch <apr@cn-eng.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The prefix/cleanup series
ad09b59f8ba8c63596674c53af062b
missed a few unprefixed IOMUXC_BASE define users. Fix these.
Signed-off-by: Andreas Pretzsch <apr@cn-eng.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch fix incorrect Kconfig symbols for MACH_FREESCALE_MX51_PDK,
MACH_FREESCALE_MX53_LOCO and MACH_FREESCALE_MX53_SMD.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Barebox do not have support for MACH_NXDKN, MACH_NXHMIBB,
MACH_NXEB500HMI and MACH_NXHX boards, so remove these symbols.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
OMAP_CLOCK_ALL is missing in Kconfig, so remove the "select" statement
and all other references to this symbol.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We PAGE_ALIGN the size in dma_alloc_coherent so do it also when free the memory.
Use PAGE_SIZE instead of magic numbers.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since commit:
2ccd451 ARM i.MX28: change default watchdog reset method
the external reset via the reset pin is broken. That commit overwrites the
HW_CLKCTRL_RESET register with only WDOG_POR_DISABLE set, which results in
disabling the external reset.
This patch uses read-modify-write to set the WDOG_POR_DISABLE, leaving the
WDOG_POR_DISABLE untouched.
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Due to some changes in the framework a resource size of zero does not map
anything at all and it does it silently.
Defining the resource size for the MCI interface make it work again on the
Chumby.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This switches the iomux-v3 (found on i.MX25,35,51,53,6) to pinctrl
support. The old SoC specific API is kept for compatibility. The
pinctrl devicetree support is enabled automatically when OFDEVICE
support is available.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch includes no functional change. If a configurable DDRPLL_M
is required later, it should be set by the board instead of from here.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The *PLL_N values can be calculated from the OSC value. This patch
includes no functional change.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Taken from the Linux kernel, simplified and reworked to match barebox.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
ODMdata tells us how much RAM is installed, so no need to define this at
the board level.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
ODMdata tells us which UART to use for debugging purposes. This is
agreed upon in both the upstream Linux kernel and U-Boot, so do it the
same way in barebox.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
All Tegra20 boards have a common startup sequence. Also there is an
agreement on how to find out about the installed amount of RAM and other
information needed by early startup. So as there is really no need to do
any lowlevel stuff per board, we can just do it at the ARCH level.
This also enables the first stage loading of barebox by detecting the
currently running CPU and booting the main CPU cluster if neccesary.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently only implements system wide reset functionality.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Replace the ad-hoc clocksource implementation with a proper driver for
the Tegra 20 timer. This driver is able to do the required hardware
initialisation itself.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Only a basic set of clocks is supported. This is a temporary solution
and will go away as soon as the port of the Tegra common clock code from
the Linux kernel is ready to go.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We will follow the Linux kernel and go devicetree only for Tegra. This
doesn't prevent specific code for certain boards, but always requires a
valid DTB for all boards.
Also regenerate the AC100 defconfig to reflect this change.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
All available opensource tools and published BCT configurations use
0x10800 as the default textbase on Tegra 20.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tegra isn't a single architecture, but a collection of more or less
similar chip families. Introduce the same conf define as used in the
Linux kernel to differentiate between those families.
Currently we are only supporting the Tegra20 chip type.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tegras main CPUs are all ARMv7.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The fec padctrl is different from what we have in the kernel iomux
file. To be able to keep the iomux file in sync with the kernel, use
a custom padctrl for the cpuimx51 board.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On OMAP4 SoC there is a SAR memory region (Save & Rescue)
where the ROM code reads the device to boot from.
This patch adds a way to set this.
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will allow to have boot sequence and later to use PXE
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With CONFIG_MMU_EARLY enabled the board does not survive the call
to imx53_init_lowlevel(). This should not happen, but the reasons
are currently unknown. This works on other boards like the i.MX53
QSB.
This patch moves the call to imx53_init_lowlevel to
barebox_arm_reset_vector() which is executed with MMU disabled.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
clock_notifier_call_chain() can't be called before init time. Protecting
it with IS_ENABLED(__PBL__) is not enough. This patch splits out a new
imx53_init_lowlevel_early which can be called before init time and does
not have the call to clock_notifier_call_chain() in it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The value for i.MX53 216MHz is actually 432MHz. Use the same value
as for i.MX51 which really corresponds to 216MHz. These are the same
PLL216 values as U-Boot uses.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For now only the v1.2 i.MX28 silicon is supported. The actual information is
read from a magic address within the internal SRAM.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The i.MX53 has the bootsource instance information stored
in SBMR[21:22], expose it to the environment.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch seperates the imx independent from the arch independent code. The
following functions and enums are renamed:
- imx_bootsource() -> bootsource_get()
- imx_set_bootsource() -> bootsource_set()
- enum imx_bootsource -> enum bootsource
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The cfa-10036 comes in two flavours, with either 128MB or 256MB of RAM
on it.
Since it's not stored anywhere, we need to runtime detect it by
introducing the cfa10036_get_ram_size function.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The ZedBoard has a connection for the GEM0. Use it.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support for the ethernet device 0 on the Zynq7000 SoC.
The GEM is compatible to/the same one as the macb on at91.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The macb/gem core is used by the Zynq SoC. In preparation of sharing
the macb driver between at91 and Zynq, rename the platform data to
'struct macb_platform_data', and move the definition to a common
location.
Signed-off-by: Josh Cartwright <joshc@eso.teric.us>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Rename the barebox_loc environment variable to bootsource, since
- barebox_loc is a mixture between abbriviation and fulltext which is not nice
- technically it describes the source the SoC has booted from. This is not
necessarily barebox but could also be some other first stage loader.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The second UART is used on the mba53 baseboard. The first UART is only
used on custom hardware. This patch changes the UART to the one used
on the freely available baseboard.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Make loading environment from MMC generic for all OMAP.
Tested on AM335x, OMAP4.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Tested-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The bootsource functions are not specific to the first stage
bootloader. They may also be used for detecting the
bootsource to decide where to load the environment from.
Also clean up includes in board files.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Avnet ZedBoard is an evalboard with a Zynq-7020 based MPSoC.
There is also a Digilent ZedBoard, that is the same but only for
academic customers.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The bootrom only reads an image if the correct checksum is present in the
header. The calculation is pretty simple:
sum over all words from 0x20 to 0x44
Two of this words are the image length. That is why the checksum can not be
calculated until barebox_image_size is known.
The easiest solution is a program that has to be run after make.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds support for the clocktree on zynq7000 SoCs.
The patch is based on clocks.c from the larger patch
ARM: zynq: add suppport for Zynq 7000 SoC
by Josh Cartwright.
The driver in that patch is converted to a platform_driver and code to
enable plls was added.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add basic support for the Xilinx Zynq-7000 EPP architecture.
The Zynq-7000 is an embedded processing platform that combines a Cortex A9
dualcore MPSoC with an Artix-7 FPGA.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On some i.MX SoCs the SDRAM controller has chipselect 2 enabled
by reset default. This confuses our SDRAM size detection. We
already have a fix for this in place. This patch adds the fix
for i.MX35 which needs it aswell. Also since we now detect the
SDRAM size in the SoC specific entry functions we have to apply
the fixup there, too.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch creates a seperate function for mx25 and mx35 to save it's
bootsource.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch renames imx_27_boot_save_loc() to imx27_boot_save_loc(), so that all
imx*_boot_save_loc() functions follow the same nameing sheme.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch removes some code leftover from:
a029e32 ARM i.MX: rework bootsource setting
which is now a no-op.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This function gives all functions a common, i.e. void, return value.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Enums are in the same way as defines, so write them in uppercase.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The number of "#if" has been reduced to have less obfuscation, now have the
three keys or have none of them
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The pcm051 has no MMC WP pin. This pin is used for a gpio and
needs to be muxed different. Created a custom mux file for
this case.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The muxing in the am33xx_mux.c file is not generic as the muxing
setup does not fit for every board. Move the structs and functions
to the mach/am33xx-mux.h so board dependend mux setups can be
created.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
use a more generic UART selection on OMAP so it can be extended to
other OMAPs
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
some sort of UART setup has to be done in order to use PUTC_LL
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- Add rules to generate dtb files in arch/arm/dts/
- add an initcall which unflattens and probes the internal devicetree
- Add skeleton devicetree
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The external NAND boot code currently does not handle bad blocks
correctly on 2k NAND flashes. This patch adds a barebox_update
handler for external NAND boot which embeds a Bad block table in
the flashed image. The boot code will skip bad blocks found in
this bad block table then.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds 32bytes of space behind the image header (exception table
+ barebox magic) for board/SoC specific use. This can be used for
example to embed some extra information in a flashed image.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The i.MX external NAND boot code checks for a bad block every
page, which is wrong. Instead, check for a bad block at the
beginning of each block.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
omap4_usbboot_pdata is not a pointer, so remove the "p"
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
CS6 and CS7 is a internal CPU resources and these chipselects are
already pre configured, so avoid to rewrite this settings.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Thomas Petazzoni
Alexander Shiyan
Lucas Stach
Sebastian Hesselbarth
Antony Pavlov
Juergen Beisert
Sascha Hauer
Alexandre Belloni
Andreas Pretzsch
Jan Weitzel
Marc Kleine-Budde
Jan Luebbe
Jean-Christophe PLAGNIOL-VILLARD
Vicente Bergas
Steffen Trumtrar
Josh Cartwright
Teresa Gámez
Hubert Feurstein