Prober slave_num is needed by cpsw_gmii_sel_am335x to calc reg value.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is needed when a phy gets registered outsize of phy_device_connect
but has to be attached to an ethernet device later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With this phy_device_connect only registers a phy device if it wasn't
registered already. This allows us to register phy devices outside
of ethernet drivers. phy_device_connect will now pick up an already
registered phy given that it's not attached to another ethernet device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If during a phy_device_connect a phy already has an ehternet device
this can only mean it's already attached to another device. return -EBUSY
in this case.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If an ethernet device already has a phy in phy_device_connect all we
have to do is to start autonegotiation. Do this early and bail out
so that for the rest of the code it's clear that we have to search for
a phy device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
phy_register_device() currently requires an attached ethernet device.
This is not needed, a phy device can equally well be registered as
a standalone device without an ethernet device. Remove the need
for an attached ethernet device in phy_register_device. Also, make
the edev <-> phy connection on a registered device which simplifies
the code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Confirmed working on Tegra 2, may need some small adjustments for
Tegra 3.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We run the system bus from the OSC clock during init, to avoid crashing
the system while reconfiguring the PLLs.
Switch to a more reasonable clock when we are done with this.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some GPIOs are optional, so it might not be an error if we can not find
a DT property. Do the same thing as the Linux kernel and only print a
debug message not an error.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Do not call mtd_ioctl for mtdraw devices. mtd_ioctl will derefence
the priv pointer to a struct mtd_info whereas with mtdraw devices it will be
a struct mtdraw pointer. We do not need ioctls for mtdraw devices, so drop
it instead of fixing it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The mmci implementation uses some specific arm amba functions, so add a
depends on ARM_AMBA.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a devicetree-only driver for to configure the gpmc and its
child devices from dt. Currently only NAND is supported.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We currently have functions to add a device based on function parameters.
This adds the corresponding functions to add resources to a device without
registering the device itself. This is useful to manipulate devices before
registering them.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds devicetree probe support for the OMAP gpio ports and
also makes sure the corresponding platform_devices don't get
registered when they are already present from devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We currently only use one slave, so drop for_each_slave and hardcode
slave[0] until we pass the proper context to the functions that makes
this hack unnecessary.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of requiring a device pointer, add a functions to select
the pinctrl state based on a device node.
The AM33xx cpsw devicetree description has several subdevices with
pinctrl information attached to them. In barebox we do not handle
the subdevices as distinct devices, so the pinctrl is never configured
correctly and the mdio bus subdevice stops working. This patch makes
it possible to configure the pinctrl without having a device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A function should either return an ERR_PTR or NULL on failure, but not both.
Let get_phy_device() return an ERR_PTR and fix the return checks in mdiobus_scan
and phy_device_connect.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Devicetree probed cpsw devices won't have platform_data, so inline
the fields from slave_data instead of keeping a pointer.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The omap3 and omap4/am33xx spi cores differ in the offset of the
registers in the address space. Instead of encoding this into the
resources use the platform_device_id mechanism. This is done in
preparation for devicetree probe support where the address space
is in the devicetree and can't be adjusted.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Also import related functions gpio_request_one() and
gpio_free_array().
This commit imports code from linux 3.7 as
the more recent linux kernel versions use gpiolib descriptors,
see this commit for details:
commit 372e722ea4dd4ca11c3d04845e11cbc15f32144c
Author: Alexandre Courbot <acourbot@nvidia.com>
Date: Sun Feb 3 01:29:29 2013 +0900
gpiolib: use descriptors internally
Make sure gpiolib works internally with descriptors and (chip, offset)
pairs instead of using the global integer namespace. This prepares the
ground for the removal of the global gpio_desc[] array and the
introduction of the descriptor-based GPIO API.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
See linux.git/include/linux/gpio.h and
linux.git/Documentation/gpio.txt for details.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We need #include "mmci.h" only and not #include <mmci.h>
which don't exists.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The current implementation of the bootloader specification depends on the
hardware name and the name of the device in /dev to match. As the default
hardware name is mciX and the device name is diskY the bootloader spec
cannot be used as is.
This patch implements a way to overwrite the device name similar to what is
possible for the imx-esdhc driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a DT init function to clk-fixed and corresponding CLK_OF_DECLARE
to put it into the DT clock provider table.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a call to of_clk_init right after platform devices have been
populated.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This add barebox versions of of_clk_init for parsing and registering
clock providers from DT. Also, a macro CLK_OF_DECLARE is added, that
allows to put init callbacks into its own section that can be linked
in the binary.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a callback function to read the current state of a GPIOs
in/out direction.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds some more printf information to gpiolib command, like the
gpiochip handling a specific gpio. Also, current direction and value
of the gpio are printed, if the gpiochip provides the corresponding
callbacks.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This disables LEDs that have a trigger function assigned right before
the trigger is installed. As the trigger was parsed before the LED has
been registered, also swap LED registration and trigger parsing.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
"%d" in format string requires a signed integer.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
No functional change, just reorder the initialization of
the different offset/size members of fdt_header in increasing
order to make it easier to read.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A lot of files rely on include/driver.h including include/of.h (and
this including include/errno.h. include the files explicitly so we can
eventually get rid of including of.h from driver.h
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support to configure the active framebuffer for the kernel through
device tree.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Use the mailbox driver to set up a framebuffer based on the firmware
configuration.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support for framebuffers with noncontiguous horizontal lines.
Video drivers can set this value if the hardware requires it.
In case a driver does not set it, the current value of
xres * (bpp / 8) is used instead.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
i.MX5x OTG port is hardwired to the internal UTMI PHY, so having
this configurable makes no sense and helps using this port with DT.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When probing spi bus masters from devicetree they got a bus_num
of -1. This works with a single bus master only since all bus masters
had the same bus_num. Detect this and dynamically assign a valid
bus_num.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There is no much sense in having the pinctrl drivers be user selectable
as all arches using on of them already selects the right one.
So to avoid presenting the user with the choice to enable unrelated
pinctrl drivers or pushing lots of dependencies into the Kconfig just
drop the configurability.
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since the mainline kernel now has its own dr_mode and phy_type DT-options
for setting modes of USB ports, do these kernel parameters compatible by
removing "barebox" prefix.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Right now we do not support persistent names for mtd devices. The
base name can be passed to add_mtd_device, but this is always appended
with a dynamic number. With this patch add_mtd_device takes a device_id
argument which can be used to create a mtd device with an exact name.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The name of the raw device is mtdraw<num> which is inconsistent to other
mtd devices which are named mtd<num>.<partname>. Rename it to mtd<num>.raw.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
KSZ8031 is similar to KSZ8021. It can use the same functions.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some controller such as the ARM AMBA pl181 can not handle more than 16bits
data length request.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Switch from local mailbox code to using the newly created clock device.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
RPi's mailbox driver is used early and it needs clock functions to
handle timeouts.
Promote to a core_initcall().
Signed-off-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of populating an extra list containing all phandles just iterate
over the whole tree. This is done as preparation for more dynamic devicetrees
where parts are loaded at runtime. Here we don't want to keep the list of
phandles in sync.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Host with inoperable ULPI able to bring the system into an
infinite loop. The patch adds error checking during initialization
to avoid this.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
check the 4 mac address register and return at the first valid
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With commit c2ef47887 mci.f_max default value is
only set when pdata is available.
Fix this with always setting the mci.f_max default
value and overrite it when pdata available.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With this the verbosity of barebox can be controlled during runtime
using the 'loglevel' globalvar.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A printf in the driver should be dev_* and contain useful information.
Both is not the case, remove it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The driver didn't work well with at24 driver. NACKS are lost.
Errors are lost in isr due to the local variable err. Also we didn't wait for
bus free in omap_i2c_xfer_msg.
Fix issues and get other improvements from linux kernel
Tested on OMAP4 and AM335x
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Check for valid period size before calling ops->config. This fixes
the pxa driver which otherwise does a division by zero. While at
it, also check for duty_ns being smaller or equal to period_ns.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
The SoCFPGA currently has all clocks described in the devicetree which
makes common clock support a straight forward task.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
as today qemu does not support phy, it will return always 0x0 to any read
on the mii bus. So the phy_id is 0 and the link is donw.
To have the norwork running on versatilpb & other qenu board for the link up
at 100Mbps.
Only enable if qemu_fixup is set.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will be done at activation
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
None of the driver make the difference between STDOUT and STDERR.
So we just need to check if putc or getc are filled in the console_device
save 32 bytes on versatilepb
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can specify the devname in the board
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
At least i.MX53 has errata ENGcm12360:
Occurs when a pending command which issues busy is completed.
For a command with R1b response, the proper software sequence
is to poll the DLA for R1b commands to determine busy
state completion. The DLA polling is not working properly for
the ESDHC module. This is relevant for all eSDHC ports (eSDHC1-4 ports)
DLA bit in PRSSTAT register cannot be
polled to wait for busy state completion.
Updated block guide to reflect that DLA is not applicable to detect
busy state, instead, should poll bit 24 in PRSSTAT register (DLSL[0] bit)
to check that wait busy state is over.
Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
since the switch to common clock, ethernet driver doesn't works and
and access to the network leads to :
eth0: Read MDIO failed...
unable to handle NULL pointer dereference at address 0x000000c7
The problem is that bit 31 (SLEEP) of register HW_CLKCTRL_ENET is kept
to its default value (1) which means : "put Ethernet block in sleep mode.
CLK_H_MAC0(1), CLK_H_MAC0(1)_S, and CLK_ENET0(1)_TX are gated off.
Ethernet can be wakeup remotely in sleep mode"
In that case the FEC don't get its clock.
This patch fix the problem by toggling this bit when FEC's clock is
enabled.
Tested on i.MX28EVK.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
the check is wrong as when the clock rate is correctly set
the function will return 0.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
when the bootmode is different than NAND (USB for example), the
GPMI clock is not enabled thus we can't probe a NAND flash.
Tested on an i.MX28
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
since the switch to common clock, SPI driver reports :
MXS: Timeout resetting block via register 0x80014000
mxs_spi mxs_spi2: MXS SPI: Timeout waiting for start
The reason is that the clock is not enabled anywhere in
the driver.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this fix :
drivers/serial/serial_auart.c:49:22: fatal error: mach/mxs.h: No such file or directory
and
drivers/serial/serial_auart.c: In function 'auart_serial_init_port':
drivers/serial/serial_auart.c:174:2: warning: implicit declaration of function 'stmp_reset_block' [-Wimplicit-function-declaration]
only compile tested ATM
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this fix :
drivers/spi/mxs_spi.c:29:22: fatal error: mach/mxs.h: No such file or directory
and
drivers/spi/mxs_spi.c: In function 'mxs_spi_setup':
drivers/spi/mxs_spi.c:102:2: error: too few arguments to function 'stmp_reset_block'
include/stmp-device.h:21:12: note: declared here
only compile tested ATM
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of hardcoding the alternate/enhanced descriptor layout make
it configurable during runtime. This is based on the value of the
enh_desc variable which is currently hardcoded to zero. This should
be configurable via device_id in the future. Since currently we have
no in tree user of this driver this currently doesn't hurt.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Import of_find_node_by_type from Linux drivers/of/base.c -
commit id d8dfad3.
This function retrieves a node pointer based on the "device_type"
property of the node.
This is used by device tree update functions in PPC support.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
commit f64ed12b accidentally swap fclk_rate from am33xx and omap3.
Revert this change.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add function for indirect access of the mmd registers, based on linux.
phy_read_mmd_indirect
phy_write_mmd_indirect
Also clean some private mmd functions
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The driver is already capable of 8 bit buswidth support, so advertise
it to actually make use of it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
According to the SD Host Controller Specification Version 3.00, the ADMA error
status bit is on the wrong bit. Fix this.
While at it, add the missing standard error status bits.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds of_clk_providers for core clocks and clock gates found on
Marvell MVEBU SoCs (Armada 370, Armada XP, Dove, and Kirkwood).
It is based on Linux clock providers with clock flags removed, as they
are not used on Barebox.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of calling of_get_model() in barebox_get_model() add a
barebox_set_model() and use it to set the boardinfo once it's
available from the devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Otherwise only the internal DT is modified, not necessarily the one passed
to the kernel.
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
of_get_tree_max_phandle - get the maximum phandle of a tree. Needed for
creating new phandles without conflicts.
of_node_create_phandle - create a phandle for a node which doesn't have one.
of_find_node_by_alias - find a node by alias name
of_find_node_by_path_or_alias - find a node by full path or alias name
of_find_root_node - find the root node for a given device node
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In merge mode a property may be overwritte with new values. When
this happens the length has to be adjusted.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There is no reason to print used region each time.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch provides a global cleanup barebox Kconfig files. This includes
replacing spaces to tabs, formatting in accordance format.
No functional changes.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
print_hex_dump is a standard kernel function, so move it outside
the ubi header files to make it usable for other code derived from
the kernel aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We do not have ubi_do_get_volume_info and ubi_do_get_device_info
and do not need them yet, so remove calls to these functions to fix
compilation.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Our devicetree printing is close to correct dts syntax, so fix
some remaining differences:
- Use an equal sign instead of a colon to separate a poperty name and
a value
- Add a semicolon at the end of properties
- Make sure we do not print a separator for empty properties
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is a fresh UBI import from Linux v3.10
This is done mainly to get fastmap support.
This was tested with the i.MX nand driver, the MXS nand driver and
on CFI NOR flash.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch helps clk-less boards to use device
tree for clock frequency probing (taken from
linux.git/drivers/tty/serial/of_serial.c).
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To update to the latest UBI support from the Kernel first remove
the old UBI support. Without it the update will be even less reviewable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The i.MX6 uses the same GPMI NAND controller as i.MX23/28 do. This adds
i.MX6 support to the driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As the apbh dma engine is also found on i.MX6 move the header file
out of MXS specific directories.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently the apbh driver uses a hardcoded base (MXS_APBH_BASE).
As a first step to clean this up add a private data struct
which is initialized during startup.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
MXS specific devices have some common infrastructure in the kernel
known as STMP devices. We have the same in barebox, but with a
mxs_ prefix instead of a stmp_ prefix. As some STMP devices are
also found on i.MX6 move the common infrastructure out of MXS
specific files and use the stmp_ prefix.
This is done in preparation for i.MX6 NAND support.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This updates the NAND stuff to Linux-3.11-rc1. It is synchronized
as best as we can get:
- locks removed
- The splitting in different files we had to better support different
features has been dropped. Instead this is now done mostly with the
use of __maybe_unused
Some barebox adjustments are forward ported, like:
- Allow partial page writes
- Optionally allow to erase bad blocks
- check for all_ff before writing a page
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The clockrate was the only really needed field from platform data.
Add clk support to retrieve the clockrate and make platform data
optional.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This introduces the ecc stength fields in the structures and fills
them in, but leaves them unused right now.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There is the same function name in the Kernel but with different
semantics. Rename to avoid naming conflicts when we update the
mtd support from the kernel.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is based on Linux:
commit e2414f4c20bd4dc62186fbfd7bdec50bce6d2ead
Author: Brian Norris <computersforpeace@gmail.com>
Date: Mon Feb 6 13:44:00 2012 -0800
Currently, the flash-based BBT implementation writes bad block data only
to its flash-based table and not to the OOB marker area. Then, as new bad
blocks are marked over time, the OOB markers become incomplete and the
flash-based table becomes the only source of current bad block
information. This becomes an obvious problem when, for example:
* code accessing the flash cannot read the flash-based BBT format
* BBT is corrupted and the flash must be rescanned for bad
blocks; we want to remember bad blocks that were marked from Linux
So to keep the bad block markers in sync with the flash-based BBT, this
patch changes the default so that we write bad block markers to the proper
OOB area on each block in addition to flash-based BBT. Comments are
updated, expanded, and/or relocated as necessary.
The new flash-based BBT procedure for marking bad blocks:
(1) erase the affected block, to allow OOB marker to be written cleanly
(2) update in-memory BBT
(3) write bad block marker to OOB area of affected block
(4) update flash-based BBT
Note that we retain the first error encountered in (3) or (4), finish the
procedures, and dump the error in the end.
This should handle power cuts gracefully enough. (1) and (2) are mostly
harmless (note that (1) will not erase an already-recognized bad block).
The OOB and BBT may be "out of sync" if we experience power loss bewteen
(3) and (4), but we can reasonably expect that on next boot, subsequent
I/O operations will discover that the block should be marked bad again,
thus re-syncing the OOB and BBT.
Note that this is a change from the previous default flash-based BBT
behavior.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds the possibility to configure the place for the environment
from the devicetree and to partition devices from the devicetree.
Configuration has the general form of devices with a regular compatible
property. This allows to later add additional drivers or drivers with
different behaviour (for example to add support for redundant environment).
The configuration is all in the /chosen/barebox/ hierarchy of the
devicetree. This separates the configuration from the hardware
description. Also it makes it possible to store the configuration
in a completely separate devicetree (or devicetree overlay). For
the same reason all configuration is done using nodepathes rather
than phandles.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
MMC/SD cards normally have a DOS/GPT partition table, but sometimes
barebox uses the unpartitioned area to store its environment. Add
devicetree partition parsing also for SD/MMC cards so that we have
a way to describe the partition in the devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
These functions allow to manipulate the "status" property of
devicenodes effectively enabling/disabling devices.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
So that users can call the of partition parsers without checking
if they are probed from the devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Mostly taken from the kernel with support for other SoCs from
Alexander Shiyan.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Alexander Shiyan <shc_work@mail.ru>
This patch moves support for MC34708 PMIC into mc13xxx driver.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When changing the rates of the ssp clocks we have to poll the
busy bit, but only when they are enabled. The current code can
not check this properly since the gates are registered as children
of the dividers. This has the effect that when the gate is disabled
the busy bit will be set forever resulting in a freezed system.
Fix this by making the gates parents of the dividers which allows
clk_is_enabled to return the correct result.
The Kernel has the same problem, but here the busy polling is
limited to 10ms, so probably noone noticed this.
The datasheet mentions that the ssp dividers shall only be changed
when the clocks are enabled. The kernel and barebox currently ignore
this. I don't know what effect violating this rule has.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to use device_ids and make code a bit smaller.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to use device_ids and make code a bit smaller.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This change will allow reuse this function for other buses.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a driver option to probe GPIO LEDs from device tree compatible
with "gpio-leds" device tree nodes.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds initialization of from device node with root_node if NULL
is passed. This corresponds to the behavior of all other node iterators.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds support for the SPI controller found on Marvell MVEBU SoCs
(Dove, Kirkwood, Discovery Innovation, and Armada 370/XP). Current driver
is DT only. Compatible strings are provided for Orion (common denominator),
Armada 370/XP and Dove SoCs.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
of_get_next_available_child does not iterate but always tries the
same node over and over again. This first prepares the entry and
then uses list_for_each_entry_continue, instead of for_each_child_of_node
before.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
of_find_node_by_name suffers from infinite looping, because it
does not check for root node of the tree iterated over. This
fixes this by checking for node->parent to determine whether
the last node has been reached.
Since of_tree_for_each_node does not iterate over the whole tree,
but only over the remaining nodes, rename it to
of_tree_for_each_node_from.
Reported-by: NISHIMOTO Hiroki <hiroki.nishimoto.if@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a DT only driver for the GPIO controller found on Marvell
Orion/MVEBU SoCs (Armada 370/XP, Dove, Kirkwood, MV78x00, Orion5x).
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds device tree support to mvebu timer and also converts clk_get
to clk_lookup to find TCLK without device name reference.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This converts Armada 370/XP SoC init to register tclk alias
for timer by physbase instead of name.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds device tree support to orion timer and also converts clk_get
to clk_lookup to find TCLK without device name reference.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This converts Kirkwood and Dove SoC init to register tclk alias
for timer by physbase instead of name.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
of_free is misleading about the actual purpose of the function. There is
already a of_create_node counterpart, so rename of_free to of_create_node
and update all users accordingly.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Convert of_add_memory parsing to make use of of_address_to_resource
instead of parsing memory ranges itself. This makes some functions
dead code which are also removed.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
struct device_node has its own resources and a pointer to associated
device_d. With recent platform related OF code, we can convert the
only user of it and remove those pointers from struct device_node.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With recent conversion to of_platfrom_populate_some functions are now
dead code and can be removed.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With recent bus/device related functions in OF API, we can now
convert to use of_platform_populate.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Antony Pavlov
Jan Weitzel
Sascha Hauer
Lucas Stach
Lucas Stach
Alexander Aring
Rostislav Lisovy
Uwe Kleine-König
Sebastian Hesselbarth
Alexander Shiyan
Andre Heider
张忠山
Markus Pargmann
Jean-Christophe PLAGNIOL-VILLARD
Teresa Gámez
Dmitry Smagin
Markus Niebel
Eric Bénard
Renaud Barbier
Steffen Trumtrar
David Jander
Jan Luebbe