Sascha Hauer
871c8f4c28
pcm037 cdev cleanup
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-07-21 16:41:45 +02:00
Sascha Hauer
f08f83421e
at91sam9620ek cdev cleanup
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-07-21 16:41:44 +02:00
Sascha Hauer
a2b7cd183b
introduce cdev
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-07-21 16:41:44 +02:00
Eric Benard
6411c3b2be
EUKREA CPUIMX27 : update boot script
...
Update bootargs's mtdparts to be able to use latest kernel
(imx_nand renamed to mxc_nand)
Signed-off-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-07-20 08:24:54 +02:00
Eric Benard
f1627ba3d4
Add NAND to EUKREA CPUIMX27 defconfig
...
Signed-off-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-07-16 09:46:34 +02:00
Eric Benard
b2db2e6cd8
Add Eukrea CPUIMX27 support
...
CPUIMX27 is built around Freescale's i.MX27 and has up to 64MB of
NOR Flash, up to 512MB of NAND Flash and up to 256MB of mDDR,
it includes an ethernet PHY in MII mode, an I2C RTC and a
ST16554 QuadUART on nCS3.
Signed-off-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-07-16 09:46:34 +02:00
Juergen Beisert
f1ed0ae1c6
Add the basic support for the DIGI a9m2440 CPU card.
...
Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2009-07-01 15:58:57 +02:00
Juergen Beisert
27acfbda77
Add the basic support for the DIGI a9m2410 CPU card.
...
Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2009-07-01 15:58:48 +02:00
Juergen Beisert
cd175ec7d2
Remove all ARM __raw_* functions. They are mixed all over
...
the place. This clean up all ARM architectures to use only one set
of io functions.
Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2009-07-01 14:35:35 +02:00
Luotao Fu
3e0fe1ba46
pca100: update boot script
...
Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
2009-06-25 18:07:54 +02:00
Luotao Fu
e212343c40
pca100: deactive usb phy cs
...
this one pull up the gpio controlled cs lines of both usb phys to avoid phy
crash caused by dirty data sent by usb controller during initialisation
Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
2009-06-25 16:21:16 +02:00
Juergen Beisert
7733de908b
Fix some layout issues and typos.
...
Reorganizing some files to parts of the
documentation where their content matches.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-06-10 12:47:20 +02:00
Wolfram Sang
74cc7814eb
Add ASM to start from NAND
...
Also rewrite IOMUX to be a lot smaller, because of 2K limit.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2009-06-04 10:31:14 +02:00
Wolfram Sang
bc4492252e
Refactor imx-NAND-init
...
Put board specific stuff to board-specific files.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2009-06-04 10:31:14 +02:00
Wolfram Sang
c83325ff72
Fix off-by-1 errors on range borders
...
It will never hit us here, but it's still wrong...
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2009-06-04 10:31:14 +02:00
Wolfram Sang
5c928b97fb
Init IOMUX in any case
...
Move SDRAM-check after IOMUX init.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2009-06-04 10:31:14 +02:00
Sascha Hauer
3658177775
i.MX35: Add iomux support from kernel
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-19 12:30:42 +02:00
Sascha Hauer
aec91d0537
mx35 3ds: add missing HCLK
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-19 12:28:20 +02:00
Sascha Hauer
8fb8b564e2
Merge branch 'for-sha' of git://git.pengutronix.de/git/mkl/u-boot-v2
2009-05-19 12:26:41 +02:00
Sascha Hauer
9afe84b60e
pcm043: Allow to switch cpu frequency from command line
...
Currently there are i.MX35 SoCs with 532MHz and 400MHz maximum
frequency. As there's some confusion about which SoCs are
available add frequency switching to the command line.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-19 12:22:44 +02:00
Marc Kleine-Budde
0780441a3f
[mmccpu] add new board: Bucyrus MMC-CPU
...
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2009-05-19 10:21:53 +02:00
Marc Kleine-Budde
59bad04470
[pm9263] fix update_root script
...
use correct image ("jffs2") to flash root
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2009-05-18 16:16:21 +02:00
Jan Weitzel
a737211a01
mDDR drive strength v2
...
workarount for drive strength issue
v2: optimized settings after temperature tests
Signed-off-by: Jan Weitzel <J.Weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-18 12:32:02 +02:00
Sascha Hauer
b8a165d1e5
pcm038: pll work
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-18 12:15:04 +02:00
Sascha Hauer
287700795c
pcm038: initialize PLLs in one step
...
We used to initialize the PLLs on PCM038 in two
steps. The first was to initialize a basic setup
so that all peripheral clocks run at their final
speed and the second step was to push the processor
to full speed after the PMIC has been initialized
for the higher voltage.
Do this in one step instead to get an easier setup.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-13 16:41:49 +02:00
Sascha Hauer
13c5d46ca1
cs8900: Whitespace changes, replace __FUNCTION__ with __func__
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-28 08:48:10 +02:00
Jan Weitzel
82a4cf29b2
pcm038: Fix PLL settings
...
We had some imx27 modules not starting through u-boot. The patch adds some
delay between switching the powerlevel up and changing the pll settings.
Please add the patch to the next release.
Signed-off-by: Jan Weitzel <J.Weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-14 17:10:12 +02:00
Sascha Hauer
5151577032
add initial phyCard-i.MX27 support
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-14 17:10:07 +02:00
Jan Weitzel
97568fd3de
mDDR drive strength
...
Set DDR type to MDDR, workarount for drive strength issue
Signed-off-by: Jan Weitzel <J.Weitzel@phytec.de>
2009-04-08 12:30:54 +02:00
Sascha Hauer
1be769ab30
Merge branch 'usb'
2009-04-07 11:02:14 +02:00
Ivo Clarysse
3ccfdfd9b9
Add i.MX21ads support
...
Signed-off-by: Ivo Clarysse <ivo.clarysse@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-07 11:00:16 +02:00
Sascha Hauer
555cd1099e
pcm037: add USB support
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-07 10:56:26 +02:00
Sascha Hauer
f3524c8984
i.MX31:
...
Rework iomux support for i.MX31:
- rename gpio-imx31.c to iomux-v2.c
- add pin definitions from Kernel
- fixup pcm037 board
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-06 11:21:28 +02:00
Sascha Hauer
927ec6229a
update pcm043 environment
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-23 14:59:09 +01:00
Sascha Hauer
7e80e7b817
pcm043: lowlevel_init.S cleanup
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-19 18:23:43 +01:00
Sascha Hauer
2703e60e43
fec imx27: rename to fec_imx
...
This driver is not only used on i.MX27 but on i.MX35 and i.MX25, so
rename it to a more generic name
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-19 12:21:48 +01:00
Sascha Hauer
e983361aed
pcm043: add some startup code from Eboot
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-02-20 18:30:42 +01:00
Sascha Hauer
b48ad93f8e
remove nonexistent include file
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-02-20 18:30:38 +01:00
Sascha Hauer
11c0b5c6f0
pcm043: enable L2 Cache inval
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-02-20 18:30:33 +01:00
Sascha Hauer
370f550107
fec imx27: configure phy address from platform data
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-02-20 18:25:16 +01:00
Sascha Hauer
612c27f97e
ARM: Add cache-l2x0 definitions
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-02-06 14:44:46 +01:00
Sascha Hauer
0cb4c4e2a5
imx: Add Phytec Phycore i.MX35 aka PCM043 support
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-02-06 14:44:46 +01:00
Sascha Hauer
9a252f1ac9
add Support for Freescale MX35 3Stack Board
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-02-06 14:44:46 +01:00
Sascha Hauer
b3f3ca075d
[MX31] Clock Controller module: redefine registers as offsets
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-01-30 12:20:10 +01:00
Sascha Hauer
9e00177172
[MX31] Use common PLL defines
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-01-30 12:08:43 +01:00
Sascha Hauer
4d19a68f35
[MX27] use common PLL defines
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-01-30 12:07:23 +01:00
Sascha Hauer
c09d002eca
update .gitignore files for linker scripts
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-01-21 23:28:14 +01:00
Sascha Hauer
e7de22476e
sandbox: Fix generation of linker script
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-01-21 23:25:35 +01:00
Sascha Hauer
c42306e026
PCM037: Adjust CS5 for SJA1000
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-19 15:03:41 +01:00
Sascha Hauer
32f9f72e9f
PCM037: Add support for different memory amounts
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-19 12:01:05 +01:00