The mx31moboard is used on the marXbot, Eyebot and Footbot robot.
Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
I am using an sam5d35 and its pmecc nand ecc controller.
In barebox, using similar atmel_nand.c the system crashes.
The problem was a call to chip->ecc.hwctl from nand_write_subpage_hwecc
(nand_base.c) when we write a sub page.
chip->ecc.hwctl function is not set when we are using PMECC controller.
As a workaround, i set NAND_NO_SUBPAGE_WRITE for PMECC controller in
order to disable sub page access in nand_write_page.
I think we can have the same problem in Linux. I do not performed
subpage nand writes from Linux but i made the following patch according
to my Barebox defect.
Signed-off-by: Herve Codina <Herve.CODINA@celad.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The default nand_read_subpage implementation returns -ENOSUPP, so we have
to make sure that barebox never uses this implementation. By setting the
NAND_SUBPAGE_READ flag to 0x0 we ensure NAND_HAS_SUBPAGE_READ() never returns
true and also give the compiler a chance to optimize away some unused code.
subpage reads are a rather exotic feature even in Linux. It is only used on
largepage NANDs with soft ecc. Even if we have this case it needs non page
aligned reads to actually profit from this feature.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Hattink, Tjalling [FINT] <T.Hattink@fugro.nl>
We need to setup the info->dev pointer before flash_get_size() since it
might use it for dev_dbg().
This fix a crash on boot when debug output is enabled.
Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
DFU is for device firmware upgrade, but for development purposes it's
sometmes useful to just start a kernel vie DFU. This adds a boot option
for doing this and also the corresponding counterpart on the host. With
this it's possible to boot a system with:
scripts/dfuboot.sh -k linuximage -d dtb -c "root=ubi0:root ubi.mtd=ubi rootfstype=ubifs ignore_loglevel"
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We can compile barebox for multiple boards at once, but currently
they all share a single default environment. This patch adds a
defaultenv_append() which boards can call to customize the default
environment during runtime. Each board now generate default environment
snippets using bbenv-y and add them during runtime with defaultenv_append()
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When booting from SD Card we don't want to load an env
from EMMC.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is a squashed commit of the following downstream
commits:
- Set CS0_END in MMDC0_MDASP to 32Gb (4GB)T
- Fix writes to MMDC0_MDSCR
- Enable bank interleaving (BI_ON) and set write
additional latency (WALAT) to 1 cycle in MMDC0_MDMISC
- Set ARCR_DYN_JMP=1 and ARCR_DYN_MAX=15 in MMDC0_MAARCR
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This was broken with commit 2a1f5f802e
"ARM: rename boards to more consistent naming"
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Copying files to tftp is broken since:
| commit d4f5bb1e01
| Author: Sascha Hauer <s.hauer@pengutronix.de>
| Date: Sat Sep 28 13:12:50 2013 +0200
|
| copy_file: Add missing O_TRUNC
|
| Without it, when copying a smaller file over a larger file the
| resulting file still has the remaining space from the larger file.
|
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since this commit copy_file passes O_TRUNC to open(). This results in the
fs layer calling fsdrv->truncate. tftp returns -ENOSYS here and open returns
with an error. To fix this return 0 for the truncate callback in tftp. Also
enforce the O_TRUNC flag when opening a file for writing on tftp as the files
are always truncated on tftp anyway.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: andreas.willig@rafi.de
This patch gates the clocks to GPU, IPU, and VPU units by default,
significantly reducing the VDDSOC power draw while barebox is running.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Most devices relevant for barebox like sd/emmc/network/uarts
work. Devicetree contains several undefined drive strength settings,
these can be fixed once the kernel has sorted this out.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Adding minimal support for the UDOO board.
For more information about the board: http://www.udoo.org/
Signed-off-by: Raphael Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a target to generate environment files from directories.
These are compiled into the barebox binary.
use it as:
bbenv-$(CONFIG_SOMETHING) += my-environment
The directory containing the files to compile into the binary
should be named my-environment.
This can be accessed in C code later as:
extern unsigned char __bbenv_my_environment_start[];
extern unsigned char __bbenv_my_environment_end[];
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The default environment buffer is an unsigned char array and thus
may be unaligned. Some decompression algorithms expect the buffer
to be sufficiently aligned for u32 accesses. We make this sure by
copying the default env to a temporary buffer. Instead of doing this
just add a __aligned(4) to the default environment.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of asking explicitly for the default environment compression
type ask for the in-barebox default compression type. This also adds
a DEFAULT_COMPRESSION_SUFFIX make variable which can be used together
with the wildcard rules for compressed files to generate compressed
files without explicitly support each compression type.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Finding out whether to rebuild the environment is a difficult task
since we have to track all files in a directory. Instead of trying
this, just rebuild the environment during every build and only if
it differs to the last one overwrite the target. This way make
only sees a change when the environment is changed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Devicetrees specify the keyboard codes for the gpio-keys
driver, so add a table to translate them into something
barebox can use.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fix the chip select configuration register offset increment and summing
of bank size so that, for chip select index greater than 0, barebox can
determine the total memory size from enabled banks.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently the version defines reflect the digits in the version
number. MMC_VERSION_4_41 is defined as 0x441 and MMC_VERSION_4_5
is defined as 0x405. This results in MMC_VERSION_4_5 < MMC_VERSION_4_41
becoming true which was surely not intended. Fix this by
redefining the versions as 0x<major><minor><micro>. This makes the
string generation more complicated but makes versions comparable
again.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Philippe Rétornaz
Herve Codina
Lucas Stach
Michael Olbrich
Philipp Zabel
张忠山
Raphaël POGGI
Renaud Barbier