This patch adds support for ConnectCore® i.MX51 board from Digi International.
A separate option includes support for debugging board for this module.
Some code taken from the bootloader U-Boot and patch from Digi.
Functional of Ethernet not tested yet.
barebox 2012.05.0-00316-g4024d9c-dirty #0 Wed Jun 6 13:08:25 MSK 2012
Board: ConnectCore i.MX51
Module Variant: i.MX515@600MHz, PHY, Acceleromter (0x0b)
Module HW Rev : 02
Module Serial : B111156789
mc13xxx-spi@mc13xxx-spi0: Found MC13892 ID: 0x0045d0 [Rev: 2.0a]
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,3V 8-bit)
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: Bad block at 0x00ce0000
nand_read_bbt: Bad block at 0x05bc0000
nand_read_bbt: Bad block at 0x0bc40000
ehci@ehci0: USB EHCI 1.00
detected i.MX51 rev 3.0
imx-esdhc@mci0: registered as mci0
imx-esdhc@mci1: registered as mci1
Malloc space: 0x95f00000 -> 0x97efffff (size 32 MB)
Stack space : 0x95ef8000 -> 0x95f00000 (size 32 kB)
envfs: wrong magic on /dev/env0
no valid environment found on /dev/env0. Using default environment
running /env/bin/init...
Hit any key to stop autoboot: 3
barebox@ConnectCore i.MX51:/
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This switches the pcm038 board to the new environment template and
does the necessary defaultconfig adjustments. Additionally it disables
UBI support as the pcm038 image is getting bigger and bigger and UBI
seems to be the most unused big (in size) feature.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some devices need to be moved to the PCM970 source file later, because
in fact these devices are not installed on the main unit PCM038.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Supported devices:
- nand
- ethernet
- mmc0, mmc1 (on stk5v3 development board)
- led (on stk5v3 development board)
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Also renamed config option name to MFD_MC13XXX.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since we do not have ISP1504-related functions, we migrated to ULPI.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Added num_modes to all imx_ipu_fb_platform_data structs.
Removed defines for pcm043 to choose display.
We may switch this during runtime now.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The lowlevel init function was a 1:1 copy from the babbage
baord, so it should be safe to switch to the generic C
lowlevel init.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Eric Benard <eric@eukrea.com>
This adds additional Kconfig help to clarify the way to use barebox
for eFuses handling.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Do not depend on the specific SoCs for the IIM module, but
instead exclude the one that don't have this unit.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The i.MX Processors support two different boot modes, the internal
boot mode and the external boot mode. Traditionally the external
NAND boot mode is handled in drivers/mtd/nand and the internal
boot mode is handled in arch/arm/mach-imx. This patch consolidates
the handling of both boot modes in arch/arm/mach-imx so that
the user does not have to look in the mtd kconfig section for
booting from NAND. Also, selecting between internal and external
boot mode now is a clear choice.
The external NAND boot mode has been independent of the mtd nand
driver, but as the code was contained in the NAND driver it was
not possible to support booting from NAND without a mtd nand driver.
This is changed with this patch.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Without this patch (against next) I get this:
rsc@thebe:barebox$ make ARCH=arm CROSS_COMPILE=<path>/arm-v5te-linux-gnueabi- menuconfig
HOSTCC scripts/kconfig/lxdialog/checklist.o
HOSTCC scripts/kconfig/lxdialog/inputbox.o
HOSTCC scripts/kconfig/lxdialog/menubox.o
HOSTCC scripts/kconfig/lxdialog/textbox.o
HOSTCC scripts/kconfig/lxdialog/util.o
HOSTCC scripts/kconfig/lxdialog/yesno.o
HOSTCC scripts/kconfig/mconf.o
HOSTLD scripts/kconfig/mconf
scripts/kconfig/mconf Kconfig
warning: (ARCH_IMX25 && ARCH_IMX27 && ARCH_IMX35 && ARCH_IMX51 && ARCH_IMX28) selects ARCH_HAS_FEC_IMX which has unmet direct dependencies (ARCH_IMX)
warning: (ARCH_IMX25 && ARCH_IMX27 && ARCH_IMX35 && ARCH_IMX51 && ARCH_IMX28) selects ARCH_HAS_FEC_IMX which has unmet direct dependencies (ARCH_IMX)
Add the option for the FEC on MX28 as well.
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
NAND_IMX_BOOT is related to the external boot mode, so do not
select it when using internal boot mode.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
via
default ARCH_IMX_INTERNAL_BOOT_NAND
and not default y on ARCH_IMX_INTERNAL_BOOT_NAND
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Makes the internal boot source configurable.
Also changes section names slightly so that .flash_header_0x1000 isn't
matched to .flash_header_0x100* etc.
Signed-off-by: Marc Reilly <marc@cpdesign.com.au>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This driver provides an interface for programming and sensing the IIM fusebox
which is present on some i.MX chips.
Since the IIM io addresses of the controlling registers and each fuse bank are
are not contiguous the driver implementation uses two drivers, imx_iim, and
imx_iim_bank. The imx_iim is the "parent" driver for a device holding the
map_base address of the control registers. The imx_iim_bank driver is for
child devices holding the map_base of each fuse bank. The platform code then,
instantiate one imx_iim_bank device per fuse bank.
Fuses blow is a dangerous operation. Thus, the fuses blow functionality can be
disabled independently at configuration time. On run time this functionality
must be enabled explicitly by setting the permanent_write_enable parameter.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On barebox-next, I get:
board/freescale-mx25-3-stack/built-in.o: In function `go':
3stack.c:(.flash_header_start+0x0): undefined reference to `_start'
board/freescale-mx25-3-stack/built-in.o: In function `imx25_3ds_fec_init':
3stack.c:(.text.imx25_3ds_fec_init+0x4): undefined reference to `mc34704_get'
3stack.c:(.text.imx25_3ds_fec_init+0x1c): undefined reference to
`mc34704_reg_write'
Signed-off-by: Ivo Clarysse <ivo.clarysse@gmail.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this modules is based on Freescale's i.MX357 CPU, with 128MB of
mDDR, 256 MB NAND, and ethernet PHY.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This boards integrates 64mB of DDR, a 256MB NAND flash, a RMII Ethernet PHY
and a i.MX257 CPU.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Newer Freescale 3-Stack development systems are equipped
with 64MiB of DDR2 SDRAM, instead of the 128MiB of mDDR SDRAM
with which earlier versions were shipped.
Signed-off-by: Ivo Clarysse <ivo.clarysse@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Building i.MX35 3stack support without the I2C drivers
does not make much sense as the board will trigger a
watchdog timer soon after start.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The flash header is used on different i.MXs other than the
i.MX25, so rename it. Also, add a possibility to put a flash
header on different offsets (0x100, 0x400 and 0x1000), needed
for different boot mediums.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Alexander Shiyan
Christian Kapeller
Teresa Gámez
Jean-Christophe PLAGNIOL-VILLARD
Paul Fertser
Marc Kleine-Budde
Eric Bénard
Robert Schwebel
Marc Reilly
Baruch Siach
Ivo Clarysse