The Kernel has mtd_read, mtd_write, mtd_erase and mtd_block_markbad.
Add these functions to barebox aswell to make future mtd synchronizations
with the kernel easier.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The kernel nowadays has mtd_read/write and other functions. In
barebox we also have these functions, but with a different prototype,
namely they correspond to the libmtd userspace functions. Rename
these functions to libmtd_* to avoid name clashes with future mtd
updates.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some controllers need an init hook after the USB controller is
started, so implement the post init hook for i.MX.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so when the first stage booloader of firmware provide the dtb
we can use it to probe the memory
also allow to print what we probe
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
device_platform_driver() - Helper macro for drivers that don't do
anything special in module registration. This eliminates a lot of
boilerplate. Driver registration will called on device_initcall.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can use it on vexpress to detect the hardware mapping
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add the initrd start and end address to the DT, code comes from u-boot.
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
detect the cpu model to dynamise the periphs mapping
currently only tested on qemu but should work on real hardware
Cortex-A9
if you use 1GiB of ram you can run the same barebox on Cortex-A15 or Cortex-A9
otherwise use vexpress_ca9_defconfig where the TEXT_BASE is at 0x63f00000
when we will add the relocation support this defconfig will be drop
qemu/arm-softmmu/qemu-system-arm -M vexpress-a9 -m 1024 -smp 1 -kernel build/vexpress/barebox -pflash build/vexpress/flash0 -nographic
Cortex-A15
qemu/arm-softmmu/qemu-system-arm -M vexpress-a15 -m 1024 -smp 1 -kernel build/vexpress/barebox -pflash build/vexpress/flash0 -nographic
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Change getopt optstring parameter type to const char *.
Also change type to const char * of tmp variable which
pointed to optstring. This will only handle readonly.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Defining STACK_BASE and MALLOC_BASE only makes sense when
either CONFIG_MEMORY_LAYOUT_DEFAULT or CONFIG_MEMORY_LAYOUT_FIXED
is set, so use separate #ifdefs instead ot #if/#else
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This IP is present on the at91sam9 until the sam9g45, on the sam9x5 we use a
new IP.
This driver is based on the linux one.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With this the files can give more context to their pr_* messages by
specifying a
at the beginning of the files. Basically the same mechanism as in the
Kernel.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently there is no common way for the mci host driver to tell
that thee car is write protected. This adds a card_write_protected callback
which is used by the framework to tell whether it's protected or not.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will allow to have no console support
Use full for bootstrap as we can save 6.5 KiB (barebox.bin) and
3.8 KiB (zbarebox.bin lzo) on at91sam9263 as example vs console simple
As on bootstrap we have often very limited size.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to have a generic code to create different bootstrap
As example
Barebox as TI Xloader
Barebox as AT91 Bootstrap
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
to detect if it's a barebox for the current running arch
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
include/environment.h is no longer necessary to build scripts/bareboxenv,
so remove its inclusion.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
environment.h is for environment variables, not for the environment
storage (envfs), so move the prototypes to envfs.h
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently Kconfig dependencies are used to allow non-interactive builds.
This leads to problems in Kconfig getting the dependencies right.
This patch adds a barebox_main function pointer which is called at the
end of the startup process. This defaults to run_shell when a shell is
enabled.
With this the HAVE_NOSHELL Kconfig variable can be removed. Non interactive
builds can now be enabled for every board allowing to compile a binary
without further Kconfig dependencies. This also allows for more flexibility,
for example boards may decide to try non-interactive startup first and
call run_shell if that fails.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently there is no common way for the mci host driver to tell
that there is no card present. This adds a card_present callback
which is used by the framework to tell whether it's present or not.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
of_new_node now takes the parent node and the name as argument and
creates a new node. This simplifies the caller and also makes the
function useful for others, so export it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a function to delete a property from the currently loaded
devicetree. Also export new_property as of_new_property.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
barebox_fdt should once become the pointer to the barebox internal
devicetree. Since barebox has its own internal devicetree format
this was never used. remove it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We already have support for unflattening the devicetree. This patch
adds support for converting it back to a dtb.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add barebox-data section in arm branch to get complete
barebox regions in sdram regions tree.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add PAGE_ALIGN_DOWN macro, which is like PAGE_ALIGN macro but
returns the lower page boundary of address.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
PAGE_ALIGN macro is needed to align addresses to page boundaries.
Move this macro to another PAGE_* defines.
Commands which uses remap_range function needs this macro.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The process of unflatten the device tree is known from the kernel,
so rename the function, because that's what it does.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- Add missing prototype for of_free()
- When root node is freed set root_node to NULL
- (re)scan aliases after freeing a node. This is necessary because
the freed node may be an alias or point to an alias
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently the bootm code uses of_fix_tree to apply the fixups
to the devicetree given on the command line. This function assumes
that there is enough space for the fixups available. Also on ARM
we have to make sure the tree does not cross 1Mib boundaries.
This patch moves the space allocation and alignment ensurance
to of_get_fixed_tree and uses it in bootm. This is the first
step for making of_get_fixed_tree the single point of devicetree
handling in barebox.
of_get_fixed_tree now takes an argument of the input fdt. If it is
given, this one is used, otherwise an internal oftree is used which
will be created in subsequent patches.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This command works like the corresponding Unix shell command and
is used for adding, multiplying and much more.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Both include/string.h and include/stringlist.h define the c preprocessor macro
__STRING_H. This leads to a compile time error, in case both files are
(indirectly) included.
Rename the macro to __STRINGLIST_H in stringlist.h.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
as today if no request or free provided do not complain
if the gpio is not request auto requested at first use
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Based on mtd-utils and stripped down to needed functionality and
reworked to barebox interfaces.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Imported from mtd-utils and stripped down to needed functionality.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Imported from mtd-utils and stripped down to needed functionality.
Add prefix to functions so we have a clean namespace.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
mtd-utils have a few macros for printouts. Provide the wrappers to make
it easier to import them.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Needed for ubiformat, we are interested in image_seq especially.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We have two versions in the tree. Use the newer one, and put it into the
mtd directory while we are at it.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Copy over the latest version from u-boot which handles bigger sizes now
and does arithmetic with shifts instead of divisions.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When multiple MMC/SD cards are present in the system we often
have to have persistent names to identify them during runtime.
This patch allows to overwrite the devicename which is used.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Make the register defines for ULPI more complete. Also, Add a proper
ULPI_* Namespace to the existing defines.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For proper USB function the usbmisc registers have to be initialized.
This patch adds a driver which matches for the usbmisc registers. This
driver is called from a new driver which binds to the USB ports to
configure the misc registers. After that the driver registers the EHCI
driver and an ULPI transceiver if necessary. Currently only host mode
is supported, but device support can be added later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The EHCI core often is part of a otg core. Allow it to be registered
separately from another driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When starting a network device wait until the link is up. Otherwise
autobooting does not work with little timeout and several attempts
have to be made until the network is finally up.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
dev_add_child is a very unsafe function. If called multiple times
it allows setting the same device to different parents thus corrupting
the siblings list. This happens regularly since:
| commit c2e568d19c
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| Date: Sat Nov 3 16:11:05 2012 +0100
|
| bus: add bus device
|
| automatically add it as parent of any bus device if none already specified
|
| we have now a nice output per bus
If for example a FATfs is mounted this nice output per bus often ends with:
> `---- fat0
> `---- 0
> `---- 0x86f0000087020031-0x86f000410df27124: /dev/<NULL>
> `---- sram00
> `---- 0x00000000-0xffffffffffffffff: /dev/<NULL>
> `---- 0x00000000-0xffffffffffffffff: /dev/<NULL>
> unable to handle NULL pointer dereference at address 0x0000000c
> pc : [<87f08a20>] lr : [<87f08a04>]
> sp : 86eff8c0 ip : 87f3fbde fp : ffffffff
> r10: ffffffff r9 : 00000000 r8 : 00000003
> r7 : 86f075b8 r6 : 00000002 r5 : ffffffec r4 : 86f07544
> r3 : 00000000 r2 : 43f900b4 r1 : 00000020 r0 : 00000005
> Flags: Nzcv IRQs off FIQs off Mode SVC_32
> [<87f08a20>] (do_devinfo_subtree+0x90/0x130) from [<87f08a90>] (do_devinfo_subtree+0x100/0x130)
>
> [<87f3e070>] (unwind_backtrace+0x0/0x90) from [<87f28514>] (panic+0x28/0x3c)
> [<87f28514>] (panic+0x28/0x3c) from [<87f3e4b8>] (do_exception+0x10/0x14)
> [<87f3e4b8>] (do_exception+0x10/0x14) from [<87f3e544>] (do_data_abort+0x2c/0x38)
> [<87f3e544>] (do_data_abort+0x2c/0x38) from [<87f3e268>] (data_abort+0x48/0x60)
This patch fixes this by adding a device to its parents children list in
register_device so that dev_add_child is no longer needed. This function
is removed from the tree. Now callers of register_device have to clearly
set the parent *before* registering a device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: Jan Lübbe <jlu@pengutronix.de>
Currently we only support oldschool IDE SFF devices. This is done
by registering a register layout struct and everything else is done
by the generic IDE SFF driver. Since modern ATA devices still use
ATA, but not the SFF interface anymore, split out the IDE SFF support
to a separate file to allow for other types of ata interfaces.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
putc already is a regular barebox function. To avoid conflicts and
confusions just let architectures define PUTC_LL directly instead
of going through this addiotional redirection.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Pass the buffer size to the file detection code. This makes sure we do not
read past the buffer. This is especially useful for ext filesystem detection
as the magic is at byte offset 1080. Also introduce a FILE_TYPE_SAFE_BUFSIZE
define which is set to the minimum bufsize the detection code needs to detect
all known filetypes.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Current barebox clk framework allow disable any clock
and there is no means to prevent that.
But there are the clocks that can't be disabled
by software at all.
This patch allow registration of a clock immune to clk_disable().
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This implements two new options for the loadenv command:
-s: removes (scrubs) old directory contents to be able to
create a fresh environment from for example /dev/defaultenv
-n: no overwrite. Do not overwrite existing files. This allows
to keep parts of the old environment.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we now create the cdev via mtd
This will also simplify sync with linux
to avoid the m25p8000 or m25p00 the cdev is still named name m25p and the
drivers m25p80
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
if board need specific phy fixup they can register it and then the code will
executed only if needed
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will expect a driver to be specified
This is needed by the phylib the probe the generic phy if not driver found
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
those led can have 2 colors but one at a time otherwise they are black
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
use the first 3 byte of the id of a 1-wire
or 6 if no OUI provided device to provide an Ethernet address
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This driver to get read/write support to most I2C EEPROMs,
after you configure the driver to know about each EEPROM on
your target board. Use these generic chip names, instead of
vendor-specific ones like at24c64 or 24lc02:
24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08,
24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024
Unless you like data loss puzzles, always be sure that any chip
you configure as a 24c32 (32 kbit) or larger is NOT really a
24c16 (16 kbit) or smaller, and vice versa. Marking the chip
as read-only won't help recover from this. Also, if your chip
has any software write-protect mechanism you may want to review the
code to make sure this driver won't turn it on by accident.
Based on linux 3.6
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
as we to have specific phy init to fix chip issue link detection support
based on linux 3.6
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
to allow to register an array of drivers
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This returns an I2C client bound to the "dummy" driver, intended for use
with devices that consume multiple addresses. Examples of such chips
include various EEPROMS (like 24c04 and 24c08 models).
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is needed for i2c-gpio support
Based on linux 3.7-rc2
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can show the this of i2c busses
set the bus device as parent of all devices.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As a new implementation of Y-Modem protocol is available,
switch from old implementation to the new one :
- remove old xyzModem* files
- remove old command loady2
- rename command loady2 to loady
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The current Y-Modem implementation has some limitations:
- Y-Modem/G protocol is not supported
- Multiple files (aka. batch) transfers are not supported
- Transfer speed over fast lines (USB console) is slow
- Code is not trivial to maintain (personnal opinion)
This implementation tries to address all these points by
introducing loady2 command.
The effects are :
- transfer speed for Y-Modem over USB jumps from 2kBytes/s
to 180kBytes/s
- transfer speed for Y-Modem/G jumps to 200kBytes/s
- multiple file transfers are possible
This command was tested on a USB console and UART 9600bps
serial line :
- NAKs (and retransmissions) were tested for faulty
serial lines
- multiple file transfers were tested
- Y-Modem, Y-Modem/G and X-Modem transfers were tested
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can request a master usefull for the spi command
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On LAN9115/LAN9117/LAN9215/LAN9217, external PHYs are supported.
Switch to external PHY based on hardware strap pin and/or override flags.
Also add a mask to platform data selecting external PHY address to be used.
Code based on linux/drivers/net/ethernet/smsc/smsc911x.c (fd9abb3d, d23f028a).
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this allow to do not provide block_isbad at mtd driver level
as example spi flash
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
use irq pin as the pin is asserted untill we clear it
This will allow to do not poll on i2c which slow down barebox
If no irq_pin is provided fall back on i2c polling
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The filetype strings are not really suitable for shell scripts, so
add a shortname array of filetypes usable for shell scripts.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will allow to avoid issue with resource order
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This switches environment variables to use linux list. This is easier
to read. An additional plus is that the environment variables no longer
need an initcall, so malloc is the only requirement for them.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Based on linux implementation.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
is_timeout call poller_call if the timeout is >= 100us
but on 1-wire bus we need to wait 500us and not more than 930us
for the bus reset. So if the poller_call is caller we can not guarantee it.
So for this introduce is_non_interruptible_timeout than we only wait.
Use it for ndelay too.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently in-system update means to write an arbitrary file to
an arbitrary device. There is no sanity check if the flashed image
is of the right type or will fit onto the device. Furthermore some
SoCs need a special preparation step for their images before
flashing them.
This adds a barebox in-system update infrastructure. Boards can
register update handlers which know how to make the board bootable.
The available handlers can be listed to be able to select one,
different force levels give the user the chance to know it better.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If none set use NA (0) as before.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When a memory bank is already registered, return an error code
instead of throwing a bug. This can happen if a board has registered
a memory bank and the same bank is then probed from the devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Do not blit the surface everytime we write an image
As we want to able to render multiple image this will cause 1 blit per image;
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To open, memmap, get the fb_info and if needed allocate the offscreen buffer
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of passing hundreds of parameter, just pass the right structure.
struct screen represent the screen with a without double buffering.
struct surface represent the part of the screen we want to render.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is needed if the image is bigger than the screen.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can pass -1 for auto detect
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds barebox common clk support loosely based on the Kernel common
clk support. differences are:
- barebox does not need prepare/unprepare
- no parent rate propagation for set_rate
- struct clk is not really encapsulated from the drivers
Along with the clk support we have support for some basic clk building
blocks:
- clk-fixed
- clk-fixed-factor
- clk-mux
- clk-divider
clk-fixed and clk-fixed-factor are completely generic, clk-mux and clk-divider
are currently the way i.MX muxes/dividers are implemented.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Most clock/device associations can be done based on the physical
base address of the corresponding device. So instead of depending
on string matching add an optional possibility to associate a clock
lookups with physical addresses. This also has the advantage that
the lookups for devicetree based devices can be identical to the
platform based devices.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Also pass flags using platform_data and remove useless casts from void*.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Adapt phylib from linux
switch all the driver to it
reimplement mii bus
This will allow to have
- phy drivers
- to only connect the phy at then opening of the device
- if the phy is not ready or not up fail on open
Same behaviour as in linux and will allow to share code and simplify porting.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
This is need for oftree device probing
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow reduce the number of driver and device to search on.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We may have some disk with MBR as a first sector. In this case, the
current FAT check returns an error. However, the FAT sector exist and
the MBR can tell us where it is.
This patch add to file_name_detect_type function the ability to find
the FAT boot sector on the first sector of the first partition in case
it is not on sector 0.
It also introduce is_fat_or_mbr to check if a buffer is a FAT boot
or MBR sector
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Jean-Christophe PLAGNIOL-VILLARD
Alexander Shiyan
Vicente Bergas
Alexander Aring
Antony Pavlov
Jan Luebbe
Steffen Trumtrar
Wolfram Sang
Robert Jarzmik
Andreas Pretzsch
Carlo Caione
Franck Jullien