Our devicetree printing is close to correct dts syntax, so fix
some remaining differences:
- Use an equal sign instead of a colon to separate a poperty name and
a value
- Add a semicolon at the end of properties
- Make sure we do not print a separator for empty properties
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When changing the rates of the ssp clocks we have to poll the
busy bit, but only when they are enabled. The current code can
not check this properly since the gates are registered as children
of the dividers. This has the effect that when the gate is disabled
the busy bit will be set forever resulting in a freezed system.
Fix this by making the gates parents of the dividers which allows
clk_is_enabled to return the correct result.
The Kernel has the same problem, but here the busy polling is
limited to 10ms, so probably noone noticed this.
The datasheet mentions that the ssp dividers shall only be changed
when the clocks are enabled. The kernel and barebox currently ignore
this. I don't know what effect violating this rule has.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to use device_ids and make code a bit smaller.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to use device_ids and make code a bit smaller.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This change will allow reuse this function for other buses.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds initialization of from device node with root_node if NULL
is passed. This corresponds to the behavior of all other node iterators.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
of_get_next_available_child does not iterate but always tries the
same node over and over again. This first prepares the entry and
then uses list_for_each_entry_continue, instead of for_each_child_of_node
before.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
of_find_node_by_name suffers from infinite looping, because it
does not check for root node of the tree iterated over. This
fixes this by checking for node->parent to determine whether
the last node has been reached.
Since of_tree_for_each_node does not iterate over the whole tree,
but only over the remaining nodes, rename it to
of_tree_for_each_node_from.
Reported-by: NISHIMOTO Hiroki <hiroki.nishimoto.if@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Only UART clocks are included for now, but the code should cover
other peripherals needs, too.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This removes the existing Tegra CAR driver and replaces it with code
ported from the Linux clock framework.
In the current state only the relevant PLLs are supported, but this is
no functional regression from the existing code.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Allows to reuse the clk gate code within other clocks.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Taken from the Linuxkernel with some small adjustments for barebox.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Clocksource read callback expects incrementing timer values, while
internal timer on Marvell SoCs counts backwards. Fix value returned
by Marvell MVEBU and Orion clocksource drivers.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The upcoming multi image support will need devicetree binary
blobs even when there is no builtin dtb. Instead of depending
on CONFIG_BUILTIN_DTB depend on CONFIG_OFTREE and let this option
select DTC.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It becomes a common pattern for boards to find a device and
call device_detect on it. Add a convenience wrapper for it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit creates MDIO bus devices to separate the MDIO bus
abstraction from the Ethernet device initialisation.
It also updates the configuration of the P2020RDB ports.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The fsl gadget driver wants to configure the portsc register
with information from platform_data. When registered from the
chipidea driver there is no platform_data. Fix the resulting
crash by not derefencing platform_data when NULL. In this
case the PORTSC register is not touched, it will have been
configured by the chipidea driver in this case.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Probe ULPI phys during USB initialization and not during driver
probe. This lowers the pressure to have the necessary board specific
setup in place early.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We used to distinguish which USB port to fixup by pdev->id. This
is < 0 for devicetree probed devices all the time, so this won't
work anymore once we switch to devicetree. Do the fixup on every
port instead, it doesn't hurt.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds omap display controller support. Currently only
OMAP4 DSS is supported.
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Chipsize didn't take number of LUNs into account. Sync chipsize calculation
to kernel commit 63795755
Tested with MT29F8G16ADBDAH4 on OMAP4
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch makes OF API use of_delete_property where applicable instead
of freeing allocated data in different places.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds some sanity checks to of_new_property and of_delete_property.
Also, value pointer is always allocated even with zero length to allow
empty properties to be distinguished from non-existing properties.
Finally, data passed to of_new_property is only copied if non-NULL.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
ENABLE_DEVICE_NOISE is used only in two network drivers and is
otherwise unused. ENABLE_FLASH_NOISE is completely unused.
ENABLE_PARTITION_NOISE enables DEBUG in the partition command,
but this code has no debug messages at all.
Remove all this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch removes the call of the cpu_is_* functions completely
and uses id_tables instead.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Added device register functions and cpu_is_am33xx()
function.
Adapted the i2c-omap driver. AM335x has a lower
clock rate and the timeout of polling the isr function
had to be increased.
Based on a patch from Shravan Kumar <shravan.k@phytec.in>.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
cpu_is_omap2430() is set when CONFIG_ARCH_OMAP is enabled.
This fits for all OMAP/AM33xx boards supported in barebox.
Cleaned up all conditions that use the cpu_is_omap2430().
Also removed some unused defines.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Board file or DT has to take care that the correct
chip select and bus values are used.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Alexander Shiyan
Jan Luebbe
Sebastian Hesselbarth
Lucas Stach
Renaud Barbier
Christoph Fritz
Jan Weitzel
Teresa Gámez
Juergen Beisert