For DDR2 RAMs, regs->zq_config is not used, which causes the
AM33XX_EMIF4_0_REG(SDRAM_CONFIG) register to be left unconfigured, resulting
in boot failure.
It seems that the DDR2 case was missed during the consolidation in commit
9f122f8bf0. The actual call for the Bone was
removed in 88659d9c4a.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The function am33xx_get_cpu_rev may be called before barebox_arm_entry(),
so we need to avoid switch statements. One example is the BeagleBone,
where we use this function to differenciate between the white and black
variants.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The driver didn't work well with at24 driver. NACKS are lost.
Errors are lost in isr due to the local variable err. Also we didn't wait for
bus free in omap_i2c_xfer_msg.
Fix issues and get other improvements from linux kernel
Tested on OMAP4 and AM335x
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The OMAP ROM code passes the boot information via r0 to the
bootloader. Add an OMAP specific barebox handler to pass this
information to the next stage. This allows us to chainload
bootloaders without loosing the information where we booted from.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Include mach/generic.h where omap_set_bootmmc_devname is declared.
Change the argument of omap_set_bootmmc_devname to const char *
to fix the resulting conflicting prototypes.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There is a lot of duplicate lowlevel code between the
am33xx boards. Move this code to am33xx_generic and
create structs for sdram settings.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Function should use lower case letters. Also give this function
more namespace. While at it include io.h rather than asm/io.h.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
omap_save_bootinfo derefences the argument passed to barebox without
checking it for validity. This breaks 2nd stage booting where r0
is undefined. The best we can do is to check whether the pointer is
somewhere in SRAM and is word aligned. This at least makes sure that
we do not oops. This introduces SoC specific xxx_save_bootinfo variants
since the SRAM addresses/sizes differ between SoCs.
Additionally fix the prototype for omap_save_bootinfo. It uses r0, so
it must be passed this variable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a omap_set_bootmmc_devname function which can be used
to specify the MMC boot device. In an xload configuration this
is then used to load the next stage. In a regular build this is
used to mount /boot.
Also a device_detect_by_name is added to allow to disable probing
for sd/mmc cards during startup.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
-Added mlo spi NOR copy handler
-This handler will convert the MLO to big endian
-Tested with pcm051 board
Signed-off-by: shravan <shravan.k@phytec.in>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The oscillator frequency varies on different AM33xx boards.
Pass the osc frequency from lowlevel board code
to set the correct one on every board.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Reviewed-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
gpiolib user have nothing to define in their machine
specific gpio.h, so do not include it.
The only thing they could define would be ARCH_NR_GPIOS,
but currently no architecture defines it. Should an architecure
feel the need to do it this would be a good opportunity to
get rid of this limitation.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With multiboard support the compiletime generated BOARDINFO string
gets more and more meaningless. This removes it from Kconfig and
replaces it with a variable that can be set at boardlevel.
Also many boards have a standard setting for the hostname in the
environment. This patch also moves the standard to C code by calling
barebox_set_hostname().
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch provides a global cleanup barebox Kconfig files. This includes
replacing spaces to tabs, formatting in accordance format.
No functional changes.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of making a pure 32bit write to a read/modify/write
operation with sr32 use writel directly. This saves a few bytes
of binary space.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The size and offset of the barebox partition in nand and spi nor flash
may vary on different boards. Make it possible to pass this information
over boardfile if needed.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The ROM loader passes the address of a buffer to the MLO in
register 0. Store this data so we can find the boot source later.
On the same way the bootinformation are passed to the barebox,
then. It has to be enshured that r0 contains always the
buffer or the boot source detection will not work.
Applied this on all OMAPs. This patch is based on work of
Jan Luebbe <jlu@pengutronix.de>.
Compile tested on all OMAP boards.
Tested on pcm049, phyCARD-A-L1 and pcm051.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Tested-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds first stage support for PCM051.
Signed-off-by: Shravan kumar <shravan.k@phytec.in>
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds OMAP machine dependent framebuffer code so that
board files can make use of driver omap-fb.
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
commit d7a913469c breaks boot source detection
for pcm049. The tracing vectors shows all tested boot sources, so order is
important. By not returning but overwriting src we effectively reversed the
order if more than one flag is set.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Don't set SET0 voltage, because it acts as boot voltage for OPP boot.
Take care that the kernel doesn't drive vset gpio to low. This may
happen while reseting the gpio module at initialization, look for
HWMOD_INIT_NO_RESET.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch removes the call of the cpu_is_* functions completely
and uses id_tables instead.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Added device register functions and cpu_is_am33xx()
function.
Adapted the i2c-omap driver. AM335x has a lower
clock rate and the timeout of polling the isr function
had to be increased.
Based on a patch from Shravan Kumar <shravan.k@phytec.in>.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For OMAP4460 omap4_scale_vcores must set the voltage according to mpu freq.
OPP100 700MHz 1210mV
OPPTB 920MHz 1320mV
OPPNT 1200MHz 1380mV
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In omap4_enable_all_clocks we not only enable the mcbsp clocks, but also
change the source from ABE_24M_FCLK to 24M_FCLK. Revert this and default
to the reset state.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
After Reset VMMC goes to default VSEL. This is not a clean power cycle for
some SD cards.
Set flag WR_S for VMMC to avoid going to default VSEL.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add config to select RAM assembly. The difference is if one or two chip selects
are used. This can't be checkt at runtime.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Jan Luebbe
Jan Weitzel
Teresa Gámez
shravan
Alexander Shiyan
Christoph Fritz