This patch adds support for COMMON_CLK API for CLPS711X targets.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds clocksource driver for CLPS711X targets and adds
support to platform to use this new driver.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
not enable as on qemu this generate a undefined instruction exception
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
detect the cpu model to dynamise the periphs mapping
currently only tested on qemu but should work on real hardware
Cortex-A9
if you use 1GiB of ram you can run the same barebox on Cortex-A15 or Cortex-A9
otherwise use vexpress_ca9_defconfig where the TEXT_BASE is at 0x63f00000
when we will add the relocation support this defconfig will be drop
qemu/arm-softmmu/qemu-system-arm -M vexpress-a9 -m 1024 -smp 1 -kernel build/vexpress/barebox -pflash build/vexpress/flash0 -nographic
Cortex-A15
qemu/arm-softmmu/qemu-system-arm -M vexpress-a15 -m 1024 -smp 1 -kernel build/vexpress/barebox -pflash build/vexpress/flash0 -nographic
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
HAVE_CONFIGURABLE_MEMORY_LAYOUT was first meant as a feature, now it's a
feature to remove it. barebox on ARM now completely uses the memory passed
in from the lowlevel code and configures the malloc area and stack space
during runtime making it obsolete to hardcode these values.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This architecture is a bit strange. It has up to four SDRAM banks, but
all have a quite limited size. The SDRAM size for the different boards
currently is unknown as it's configurable with Kconfig. We use a SDRAM
size based on the value of the only board we have in the defconfigs:
edb9301. This likely breaks other ep93xx boards.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
All Samsung boards automatically detect their SDRAM size. The size detection
code can't be called safely from lowlevel C code, so instead the minimum SDRAM
size is guessed from the defconfig files.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
All boards use hardcoded SDRAM addresses, copied from the board init file.
OMAP3 boards are a bit special, they had a SoC specific reset() function. This
is renamed to omap3_invalidate_dcache() and called from the board lowlevel init
code now.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Most i.MX boards can use the imx*_barebox_entry functions. The remaining
(i.MX21, i.MX6) use hardcoded base addresses.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Hi Sascha,
I've made the changes you suggested in this resent patch.
Everything related to custom ATAGs has been moved to the board
directory.
The generic code does not make any references to feature lists or
bootloader versions.
About the setup_feature_list prototype:
it has been renamed to atag_appender
it's not a function, it's a pointer to a function. Can it have a
prototype other than it's own declaration?
All non-related changes has been dropped. They were checkpatch.pl
warnings unrelated to this patch.
Regards,
Vicente.
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch provides a global cleanup barebox Kconfig files. This includes
replacing spaces to tabs, formatting in accordance format, removing
extraneous lines and spaces. No functional changes.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds lowlevel debug functions for i.MX. As we have a great variety
of different UARTs on i.MX currently no Kconfig support for chosing the
correct one is added. Instead we expect the user to add the correct
define and issue a compiler warning if he hasn't.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds new architecture (CLPS711X) into barebox.
The core-logic functionality of the device is built around an ARM720T
processor running at clock speeds up to 90 MHz.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This was once disabled because we had no board support. This has
changed, so enable the S5P board support in the config so that
the friendlyarm_tiny210_defconfig actually builds for the correct
machine.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On at91 we need to put the size to load is the sram at the 6th exception vector
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is needed by at91 to specify the size of the binary to load from the
bootrom when booting for non nor flash.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Today we only use the DBGU port
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This allows for creating a pre-bootloader binary for
- nand boot
- mmc boot
- compressed image
The pbl will be incharge of the lowlevel init if needed.
The barebox will skip it.
Import string functions from linux 3.4 (arch/arm/boot/compressed/string.c) and
implement a dummy panic.
For now on introduce dummy zbarebox* targets and c code that will contain later
the decompressor. This only implemeted on ARM.
This patch is based on Sascha Hauer <s.hauer@pengutronix.de>
Add compressed image support patch
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
After adding the base support, the SoC can now be enabled in the build system.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The other SoCs differs in many ways from the currently supported S3C2410 and
S3C2440, so remove them.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This shrinks the resulting binary size by ~25%. Exceptions
are still handled in arm mode, so we have to explicitely
put .arm directives into the exception code. Thumb-2 mode
has been tested on i.MX51 Babbage board.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The S3Cxxxx family consists of ARMv4, ARMv5 and ARMv6 types of CPU cores. The
S3C24xx sub family is only one of it. To be able to handle all CPUs in one mach
directory, use a more generic name for it.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The core support was brought by Marc and Sascha.
The cache choice was fixed by Luotao Fu.
Some gpio and devices addons were provided by Robert.
Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fixes alignment for the "System Type" menu entry.
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will also fix the clock support as we now switch to allocated generic
device
as we can need to associate the clock and the device but the driver is probe
before the association
we also change the atmel serial name to "atmel_usart" to simplify sharing with
linux
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On several boards without MMU support the vectors cannot be mapped
to 0x0 and exception support is nonfunctional anyway, so make this
configurable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We never supported the sigmatel stm chips and probably
never will. So do the first step and rename the architecture
to mxs just like in the kernel.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
from linux kernel v2.6.37
This patch adds various C and assembler macros that help with using
the unified assembler syntax for compiling files to either ARM or
Thumb-2 modes.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
tested with qemu only
qemu-system-arm -M versatilepb -monitor null -kernel barebox -net nic -net user -tftp "<uImage-path>/" -serial stdio
add -nographic if you do not want the lcd via sdl
Signed-off-by: Alexey Zaytsev <alexey.zaytsev@gmail.com>
update:
- use default env
- move arm_timer.h as in the kernel
- add nor flash support
- udpate defconfig
- fix copyright copy from linux
- fix ARCH_TEXT_BASE
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds genetic GPIO support to all S3C2440 processor based systems.
Also it adds definitions to setup the pin multiplexer in a way the other
architectures do.
Note: Tested on a S3C2440 based system only. But should work on an S3C2410, too.
Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
These CPUs are called "i.MX", but they are of type STM378x from SigmaTel. They
do not share any devices with the other i.MX CPUs, so we need a separate
architecute directory to handle them without an ifdef hell in the native i.MX
files.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
as refer in this patch "arm & sh: factorised duplicated clkdev.c"
factorise some generic infrastructure to assist looking up struct clks
for the ARM & SH architecture.
as the code is identical at 99% in linux
move it also as preparing for the SH adding
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
this will be re-add as mach-at91
for now on keep the net driver which will be updated to new API
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
The tags for the command line parameters are not used, so let's remove them:
- CMDLINE_TAG
- SETUP_MEMORY_TAGS
- INITRD_TAG
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
instead of select first the board which will select the arch, now
first choice the arch to filter the possible boards
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
instead of select first the board which will select the arch, now
first choice the arch to filter the possible boards
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
instead of select first the board which will select the arch, now
first choice the arch to filter the possible boards
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
instead of select first the board which will select the arch, now
first choice the arch to filter the possible boards
as it's already done for omap
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>