commit f64ed12b accidentally swap fclk_rate from am33xx and omap3.
Revert this change.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add function for indirect access of the mmd registers, based on linux.
phy_read_mmd_indirect
phy_write_mmd_indirect
Also clean some private mmd functions
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The driver is already capable of 8 bit buswidth support, so advertise
it to actually make use of it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
According to the SD Host Controller Specification Version 3.00, the ADMA error
status bit is on the wrong bit. Fix this.
While at it, add the missing standard error status bits.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds of_clk_providers for core clocks and clock gates found on
Marvell MVEBU SoCs (Armada 370, Armada XP, Dove, and Kirkwood).
It is based on Linux clock providers with clock flags removed, as they
are not used on Barebox.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of calling of_get_model() in barebox_get_model() add a
barebox_set_model() and use it to set the boardinfo once it's
available from the devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Otherwise only the internal DT is modified, not necessarily the one passed
to the kernel.
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
of_get_tree_max_phandle - get the maximum phandle of a tree. Needed for
creating new phandles without conflicts.
of_node_create_phandle - create a phandle for a node which doesn't have one.
of_find_node_by_alias - find a node by alias name
of_find_node_by_path_or_alias - find a node by full path or alias name
of_find_root_node - find the root node for a given device node
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In merge mode a property may be overwritte with new values. When
this happens the length has to be adjusted.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There is no reason to print used region each time.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch provides a global cleanup barebox Kconfig files. This includes
replacing spaces to tabs, formatting in accordance format.
No functional changes.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
print_hex_dump is a standard kernel function, so move it outside
the ubi header files to make it usable for other code derived from
the kernel aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We do not have ubi_do_get_volume_info and ubi_do_get_device_info
and do not need them yet, so remove calls to these functions to fix
compilation.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Our devicetree printing is close to correct dts syntax, so fix
some remaining differences:
- Use an equal sign instead of a colon to separate a poperty name and
a value
- Add a semicolon at the end of properties
- Make sure we do not print a separator for empty properties
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is a fresh UBI import from Linux v3.10
This is done mainly to get fastmap support.
This was tested with the i.MX nand driver, the MXS nand driver and
on CFI NOR flash.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch helps clk-less boards to use device
tree for clock frequency probing (taken from
linux.git/drivers/tty/serial/of_serial.c).
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To update to the latest UBI support from the Kernel first remove
the old UBI support. Without it the update will be even less reviewable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The i.MX6 uses the same GPMI NAND controller as i.MX23/28 do. This adds
i.MX6 support to the driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As the apbh dma engine is also found on i.MX6 move the header file
out of MXS specific directories.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently the apbh driver uses a hardcoded base (MXS_APBH_BASE).
As a first step to clean this up add a private data struct
which is initialized during startup.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
MXS specific devices have some common infrastructure in the kernel
known as STMP devices. We have the same in barebox, but with a
mxs_ prefix instead of a stmp_ prefix. As some STMP devices are
also found on i.MX6 move the common infrastructure out of MXS
specific files and use the stmp_ prefix.
This is done in preparation for i.MX6 NAND support.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This updates the NAND stuff to Linux-3.11-rc1. It is synchronized
as best as we can get:
- locks removed
- The splitting in different files we had to better support different
features has been dropped. Instead this is now done mostly with the
use of __maybe_unused
Some barebox adjustments are forward ported, like:
- Allow partial page writes
- Optionally allow to erase bad blocks
- check for all_ff before writing a page
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The clockrate was the only really needed field from platform data.
Add clk support to retrieve the clockrate and make platform data
optional.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This introduces the ecc stength fields in the structures and fills
them in, but leaves them unused right now.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There is the same function name in the Kernel but with different
semantics. Rename to avoid naming conflicts when we update the
mtd support from the kernel.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is based on Linux:
commit e2414f4c20bd4dc62186fbfd7bdec50bce6d2ead
Author: Brian Norris <computersforpeace@gmail.com>
Date: Mon Feb 6 13:44:00 2012 -0800
Currently, the flash-based BBT implementation writes bad block data only
to its flash-based table and not to the OOB marker area. Then, as new bad
blocks are marked over time, the OOB markers become incomplete and the
flash-based table becomes the only source of current bad block
information. This becomes an obvious problem when, for example:
* code accessing the flash cannot read the flash-based BBT format
* BBT is corrupted and the flash must be rescanned for bad
blocks; we want to remember bad blocks that were marked from Linux
So to keep the bad block markers in sync with the flash-based BBT, this
patch changes the default so that we write bad block markers to the proper
OOB area on each block in addition to flash-based BBT. Comments are
updated, expanded, and/or relocated as necessary.
The new flash-based BBT procedure for marking bad blocks:
(1) erase the affected block, to allow OOB marker to be written cleanly
(2) update in-memory BBT
(3) write bad block marker to OOB area of affected block
(4) update flash-based BBT
Note that we retain the first error encountered in (3) or (4), finish the
procedures, and dump the error in the end.
This should handle power cuts gracefully enough. (1) and (2) are mostly
harmless (note that (1) will not erase an already-recognized bad block).
The OOB and BBT may be "out of sync" if we experience power loss bewteen
(3) and (4), but we can reasonably expect that on next boot, subsequent
I/O operations will discover that the block should be marked bad again,
thus re-syncing the OOB and BBT.
Note that this is a change from the previous default flash-based BBT
behavior.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds the possibility to configure the place for the environment
from the devicetree and to partition devices from the devicetree.
Configuration has the general form of devices with a regular compatible
property. This allows to later add additional drivers or drivers with
different behaviour (for example to add support for redundant environment).
The configuration is all in the /chosen/barebox/ hierarchy of the
devicetree. This separates the configuration from the hardware
description. Also it makes it possible to store the configuration
in a completely separate devicetree (or devicetree overlay). For
the same reason all configuration is done using nodepathes rather
than phandles.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
MMC/SD cards normally have a DOS/GPT partition table, but sometimes
barebox uses the unpartitioned area to store its environment. Add
devicetree partition parsing also for SD/MMC cards so that we have
a way to describe the partition in the devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
These functions allow to manipulate the "status" property of
devicenodes effectively enabling/disabling devices.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
So that users can call the of partition parsers without checking
if they are probed from the devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Mostly taken from the kernel with support for other SoCs from
Alexander Shiyan.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Alexander Shiyan <shc_work@mail.ru>
This patch moves support for MC34708 PMIC into mc13xxx driver.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When changing the rates of the ssp clocks we have to poll the
busy bit, but only when they are enabled. The current code can
not check this properly since the gates are registered as children
of the dividers. This has the effect that when the gate is disabled
the busy bit will be set forever resulting in a freezed system.
Fix this by making the gates parents of the dividers which allows
clk_is_enabled to return the correct result.
The Kernel has the same problem, but here the busy polling is
limited to 10ms, so probably noone noticed this.
The datasheet mentions that the ssp dividers shall only be changed
when the clocks are enabled. The kernel and barebox currently ignore
this. I don't know what effect violating this rule has.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to use device_ids and make code a bit smaller.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to use device_ids and make code a bit smaller.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This change will allow reuse this function for other buses.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a driver option to probe GPIO LEDs from device tree compatible
with "gpio-leds" device tree nodes.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds initialization of from device node with root_node if NULL
is passed. This corresponds to the behavior of all other node iterators.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds support for the SPI controller found on Marvell MVEBU SoCs
(Dove, Kirkwood, Discovery Innovation, and Armada 370/XP). Current driver
is DT only. Compatible strings are provided for Orion (common denominator),
Armada 370/XP and Dove SoCs.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
of_get_next_available_child does not iterate but always tries the
same node over and over again. This first prepares the entry and
then uses list_for_each_entry_continue, instead of for_each_child_of_node
before.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
of_find_node_by_name suffers from infinite looping, because it
does not check for root node of the tree iterated over. This
fixes this by checking for node->parent to determine whether
the last node has been reached.
Since of_tree_for_each_node does not iterate over the whole tree,
but only over the remaining nodes, rename it to
of_tree_for_each_node_from.
Reported-by: NISHIMOTO Hiroki <hiroki.nishimoto.if@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a DT only driver for the GPIO controller found on Marvell
Orion/MVEBU SoCs (Armada 370/XP, Dove, Kirkwood, MV78x00, Orion5x).
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds device tree support to mvebu timer and also converts clk_get
to clk_lookup to find TCLK without device name reference.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This converts Armada 370/XP SoC init to register tclk alias
for timer by physbase instead of name.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds device tree support to orion timer and also converts clk_get
to clk_lookup to find TCLK without device name reference.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This converts Kirkwood and Dove SoC init to register tclk alias
for timer by physbase instead of name.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
of_free is misleading about the actual purpose of the function. There is
already a of_create_node counterpart, so rename of_free to of_create_node
and update all users accordingly.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Convert of_add_memory parsing to make use of of_address_to_resource
instead of parsing memory ranges itself. This makes some functions
dead code which are also removed.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
struct device_node has its own resources and a pointer to associated
device_d. With recent platform related OF code, we can convert the
only user of it and remove those pointers from struct device_node.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With recent conversion to of_platfrom_populate_some functions are now
dead code and can be removed.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With recent bus/device related functions in OF API, we can now
convert to use of_platform_populate.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This creates a Linux OF API compatible counterpart of of_get_named_gpio_flags.
Existing of_get_named_gpio is converted to a static inline function, which is
in the corresponding of_gpio.h include. While at it, drivers/of/gpio.c is
also renamed to drivers/of/of_gpio.c to follow the of_ prefix naming scheme.
The new include is also added to existing users of of_get_named_gpio.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This imports some bus and device related functions from Linux OF API
with some modifcations for Barebox.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
OF_ROOT_NODE_* defines should not be used outside of base.c. Move them
to drivers/of/base.c to ensure they will not be used elsewhere.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This converts existing of_translate_address to recently added API. In
contrast to existing behavior, the new function honors ranges properties
properly. It now allows reg properties to be set as offset with respect
to the correspoding parent node.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This imports drivers/of/address.c from Linux with some minor modifications.
of_translate_address is not yet enabled and PCI and ISA related bus translations
have not been imported. Also, a corresponding include header is created with
prototypes and non-OF function stubs.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Only UART clocks are included for now, but the code should cover
other peripherals needs, too.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This removes the existing Tegra CAR driver and replaces it with code
ported from the Linux clock framework.
In the current state only the relevant PLLs are supported, but this is
no functional regression from the existing code.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Allows to reuse the clk gate code within other clocks.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Taken from the Linuxkernel with some small adjustments for barebox.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Clocksource read callback expects incrementing timer values, while
internal timer on Marvell SoCs counts backwards. Fix value returned
by Marvell MVEBU and Orion clocksource drivers.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The upcoming multi image support will need devicetree binary
blobs even when there is no builtin dtb. Instead of depending
on CONFIG_BUILTIN_DTB depend on CONFIG_OFTREE and let this option
select DTC.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It becomes a common pattern for boards to find a device and
call device_detect on it. Add a convenience wrapper for it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit creates MDIO bus devices to separate the MDIO bus
abstraction from the Ethernet device initialisation.
It also updates the configuration of the P2020RDB ports.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The fsl gadget driver wants to configure the portsc register
with information from platform_data. When registered from the
chipidea driver there is no platform_data. Fix the resulting
crash by not derefencing platform_data when NULL. In this
case the PORTSC register is not touched, it will have been
configured by the chipidea driver in this case.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Probe ULPI phys during USB initialization and not during driver
probe. This lowers the pressure to have the necessary board specific
setup in place early.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We used to distinguish which USB port to fixup by pdev->id. This
is < 0 for devicetree probed devices all the time, so this won't
work anymore once we switch to devicetree. Do the fixup on every
port instead, it doesn't hurt.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds omap display controller support. Currently only
OMAP4 DSS is supported.
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Chipsize didn't take number of LUNs into account. Sync chipsize calculation
to kernel commit 63795755
Tested with MT29F8G16ADBDAH4 on OMAP4
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch makes OF API use of_delete_property where applicable instead
of freeing allocated data in different places.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds some sanity checks to of_new_property and of_delete_property.
Also, value pointer is always allocated even with zero length to allow
empty properties to be distinguished from non-existing properties.
Finally, data passed to of_new_property is only copied if non-NULL.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
ENABLE_DEVICE_NOISE is used only in two network drivers and is
otherwise unused. ENABLE_FLASH_NOISE is completely unused.
ENABLE_PARTITION_NOISE enables DEBUG in the partition command,
but this code has no debug messages at all.
Remove all this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch removes the call of the cpu_is_* functions completely
and uses id_tables instead.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Added device register functions and cpu_is_am33xx()
function.
Adapted the i2c-omap driver. AM335x has a lower
clock rate and the timeout of polling the isr function
had to be increased.
Based on a patch from Shravan Kumar <shravan.k@phytec.in>.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
cpu_is_omap2430() is set when CONFIG_ARCH_OMAP is enabled.
This fits for all OMAP/AM33xx boards supported in barebox.
Cleaned up all conditions that use the cpu_is_omap2430().
Also removed some unused defines.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Board file or DT has to take care that the correct
chip select and bus values are used.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently we can only (re)scan all USB hosts. Add a function to
scan individual hosts. This is useful for implementing the detect
callback in the next patch.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A command should not be interested in the internal USB core state, so
move the state handling into the core.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This renames the USB devices to reflect the bus structure.
The base name for a USB device is usb<devno>. For each child
device we add a -<parent-port-no>. This makes it more easy
to identify devices.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Embedding struct ata_ioports into struct ide_port saves us an allocation.
Making it available to client drivers is necessary to give them access
to struct ata_port which is needed in the next patch.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Remove device_node_for_nach_child and convert users to corresponding
imported OF API functions.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With of_get_child_by_name from Linux API, we can now convert and remove
of_find_child_by_name.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
This patch converts users of of_tree_for_each_node to recently added
for_eacg_compatible_node helper. Also of_tree_for_each_node is removed
from public OF API.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
