The bootargs are now autogenerated by barebox and the hostname should
not be preconfigured.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Commit 0d6392de4a introduced a stripped
down device tree used for both white and black Beaglebone variants
that included the 256 MiB memory node from am335x-bone-common.dtsi.
This leads to the following error in the MLO:
mmu: Critical Error: Can't request SDRAM region for ttb at 9fff4000
This patch removes the (for the Beaglebone black) invalid memory size
from the common device tree and instead registers the memory bank
manually in the board file.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add intermediate .S files to .SECONDARY. Otherwise make deletes them
and regenerates them each build.
Also remove KBUILD_DTBS since the make system descends in dts/ anyway.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The FSF address has changed; The FSF site says that
address is
Free Software Foundation
51 Franklin Street, Fifth Floor
Boston, MA 02110-1301
USA
(see http://www.fsf.org/about/contact/)
Instead of updating it each time the address changes,
just drop it completely treewide.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The beaglebone white and black have different devicetrees. Both
get linked into the MLO which makes it too big. Use a devicetree
generated from am335x-bone-common.dtsi which both board variants
can share. This reduces the binary size by about 30k.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fixes:
arch/ppc/boards/freescale-p1022ds/ddr.c: In function 'fsl_ddr_board_info':
arch/ppc/boards/freescale-p1022ds/ddr.c:39:21: warning: assignment discards 'const' qualifier from pointer target type [enabled by default]
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fixes:
arch/mips/configs/dlink-dir-320_defconfig:52:warning: override: reassigning to symbol CMD_DHCP
arch/mips/configs/dlink-dir-320_defconfig:54:warning: override: reassigning to symbol CMD_PING
arch/mips/configs/dlink-dir-320_defconfig:55:warning: override: reassigning to symbol CMD_TFTP
arch/mips/configs/dlink-dir-320_defconfig:64:warning: override: reassigning to symbol FS_TFTP
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fixes:
arch/arm/configs/friendlyarm_mini2440_defconfig:38:warning: override: reassigning to symbol CMD_TFTP
arch/arm/configs/friendlyarm_mini2440_defconfig:46:warning: override: reassigning to symbol FS_TFTP
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Mainly for Jetson TK1 support, but -next moved
some stuff around. Also enable some filesystems.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We can reuse the Tegra30 pinctrl driver, as the bit
layout is the same. Just add the pin and drivegroups
and some compile-time magic to avoid bloat.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If the bootloader doesn't init the architectural timer
on Cortex A15 Linux falls over when trying to boot.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
I don't know why get_runtime_offset fails on T124 yet,
but this is a safe workaround, with the nice side-effect
of fixing second stage barebox loading.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Don't disable clk to unrelated devices in the process.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Those 3 are needed to power CPU0 from the CPUG cluster.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Even the lowlevel functions are growing to a
size where having a stack seem beneficial.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In RCM aka recovery mode the BootROM waits for a
usbloader to take over control. On most boards this
is triggered by holding a physical switch which may
be inconvinient at times. Add a command to switch
into RCM from software.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It wasn't hard to find the right spot to copy the image
to before, but this makes it a bit more explicit.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The voltage for programming the fuses is external to the SoC and
on some boards this is controllable with a regulator, so add regulator
support to the iim driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Jan Luebbe
Philipp Zabel
Antony Pavlov
Alexander Shiyan
Lucas Stach
Lucas Stach