on the edmqmx6 barebox is loaded into SRAM, so it must not get
too big. Disable some stuff to make the image fit into SRAM again.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This enables a lot of new features in the defconfig:
- Image compression
- FAT support
- Ext4 support
- UBIFS support
- more commands
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Update mioa701 board for new setup :
- double the barebox size to 524288 bytes
- add new commands
- add device tree support, for future PXA port to devicetree
- add reset source
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Beaglebone and the AM335x Phytec phyCORE can be compiled
together, so merge the configs into a am335x_mlo_defconfig.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As with devicetree support the binary will get too large for the
SRAM drop the configuration. It was mainly meant for debugging purposes
anyway.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This switches the am335x Phytec phyCORE to devicetree probe support.
For now we use a linked in dtb.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The image will be named after the official name of this board:
barebox-freescale-mx6-sabreline.img
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To keep things clean I removed all support for the old way to build
images. There is now a single tegra_v7 defconfig which builds both
supported Tegra boards as images.
The new image generation also paves the way for integration of the
tegra-cbootimage tool to produce directly flashable images.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will be used to force the update or the start test mode
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
They are currently unused by the board. Enable them anyway to get
compile coverage for the drivers which are otherwise currently unused
in mainline
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- compile in thumb2 mode for a smaller binary
- increase TEXT_BASE to get more memory space
- set malloc size to zero for autodetection
- enable some more commands
- disable MCI_STARTUP, it's no longer needed and saves some time
during boot
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With multiboard support the compiletime generated BOARDINFO string
gets more and more meaningless. This removes it from Kconfig and
replaces it with a variable that can be set at boardlevel.
Also many boards have a standard setting for the hostname in the
environment. This patch also moves the standard to C code by calling
barebox_set_hostname().
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds support for the Phytec phyFLEX-i.MX6 board. The phyFLEX-i.MX6
is a system-on-module based on the Freescale i.MX6 SoC. This patch supports
the 1GiB and 2GiB variants on a PBA-B-01 baseboard.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This drops support for storing the environment in the eMMC,
but the standard bootsource is the SPI NOR flash.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch moves support for MC34708 PMIC into mc13xxx driver.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support for the GK802 'QUAD CORE Mini PC', which seems to be loosely
based on the Freescale i.MX6Q HDMI dongle reference design.
It is supposedly identical to the Hiapad Hi802.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds first stage support for PCM051.
Signed-off-by: Shravan kumar <shravan.k@phytec.in>
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch updates SolidRun CuBox defconfig to more commands also valueable
for debug. Also, all future driver subsystems are enabled to ease driver
development.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For splashscreen support on pcm049, this patch adds omap4 framebuffer
platform data and configures display pd050vl1, g104x1, pm070wl4, pd104slf,
edt_etm0350G0dh6, edt_etm0430G0dh6, edt_etmv570G2dhu and edt_etm0700G0dh6
Also add extra muxing and defconfig
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is a nearly full-blown config for the v7 i.MX (i.MX51, i.MX53 and
i.MX6).
currently the following images are built:
barebox-imx51-babbage.img
barebox-imx53-loco.img
barebox-imx6-realq7.img
barebox-genesi-efikasb.img
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In principle we could build barebox for multiple i.MX SoCs, so
select the correct SoC from the board selection.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This converts the Freescale i.MX53 loco aka qsb board to
multi image. The image will be named:
barebox-freescale-imx53-loco.img
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This switches the babbage board to probe from devicetree for all
for all devices we currently support probing from devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Globalscale Guruplug board is a small NAS-type plug platform that
uses a Marvell Kirkwood SoC.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Tegra arch will be fully based on device tree and most boards
shouldn't need anything more than the generic drivers and arch code.
This adds generic tegra20 board support, but since we currently have
no way to combine an image with a devicetree other than compiling it
into the single image we also add Colibri T20 on Iris support here
and add a defconfig for it.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The SolidRun CuBox is a small cubic platform based on the Marvell
Dove SoC. There is nothing more than a console, yet.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Armada XP GP platform is an evaluation platform designed by
Marvell, that uses the MV78460 quad-core SoC from the Armada XP
family.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Mirabox is a platform manufactured by Globalscale, and based on
the Marvell Armada 370 SoC.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The OpenBlocks AX3 platform is manufactured by PlatHome and uses the
MV78260 dual-core SoC from the Armada XP family.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
OMAP_CLOCK_ALL is missing in Kconfig, so remove the "select" statement
and all other references to this symbol.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
ODMdata tells us which UART to use for debugging purposes. This is
agreed upon in both the upstream Linux kernel and U-Boot, so do it the
same way in barebox.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We will follow the Linux kernel and go devicetree only for Tegra. This
doesn't prevent specific code for certain boards, but always requires a
valid DTB for all boards.
Also regenerate the AC100 defconfig to reflect this change.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Robert Jarzmik
Lucas Stach
Lucas Stach
Philipp Zabel
Jean-Christophe PLAGNIOL-VILLARD
shravan
Teresa Gámez
Alexander Shiyan
Philipp Zabel
Sebastian Hesselbarth
Christoph Fritz
Gregory Hermant
Thomas Petazzoni