mach-mvebu has two files containing lowlevel code. Consolidate both into
mach-mvebu/lowlevel.c. Also put the now empty mach-mvebu/common.c into
non-lowlevel obj-y as it will be used for common non-lowlevel code later.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
All current boards use the same TEXT_BASE, therefore set the default
TEXT_BASE by SoC instead of by board.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
For i.MX devicetree boards the console= parameter is automatically
generated and can be dropped from the env files. If a file becomes
empty then, remove it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The arch/arm/include/asm/gpio.h header file contains
#ifndef CONFIG_GPIOLIB
#include <mach/gpio.h>
#else
#include <asm-generic/gpio.h>
#endif
We use CONFIG_GPIOLIB=y for the only mach-versatile
Versatile/PB board so there is no need of <mach/gpio.h>.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The bootargs are now autogenerated by barebox and the hostname should
not be preconfigured.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Commit 0d6392de4a introduced a stripped
down device tree used for both white and black Beaglebone variants
that included the 256 MiB memory node from am335x-bone-common.dtsi.
This leads to the following error in the MLO:
mmu: Critical Error: Can't request SDRAM region for ttb at 9fff4000
This patch removes the (for the Beaglebone black) invalid memory size
from the common device tree and instead registers the memory bank
manually in the board file.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
External NOR boot only requires copying the image to NOR Flash.
This also adds (un)protecting the flash which is required for
NOR Flash.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Register the board specific environment during runtime using
defaultenv_append_directory() to make it available for multi
image support.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We used to relocate the executable to the current address. This does
not work when the executable runs from a readonly location like for
example NOR Flash. Test if we run from inside the available memory and
if we do, relocate to the current address as before. Otherwise copy
the executable to the start of memory and relocate to that address.
While at it add some comments to the code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch removes non-DT support for PCM-038/PCM-970 and switch
to devicetree probe for these targets.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The FSF address has changed; The FSF site says that
address is
Free Software Foundation
51 Franklin Street, Fifth Floor
Boston, MA 02110-1301
USA
(see http://www.fsf.org/about/contact/)
Instead of updating it each time the address changes,
just drop it completely treewide.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The beaglebone white and black have different devicetrees. Both
get linked into the MLO which makes it too big. Use a devicetree
generated from am335x-bone-common.dtsi which both board variants
can share. This reduces the binary size by about 30k.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fixes:
arch/arm/configs/friendlyarm_mini2440_defconfig:38:warning: override: reassigning to symbol CMD_TFTP
arch/arm/configs/friendlyarm_mini2440_defconfig:46:warning: override: reassigning to symbol FS_TFTP
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Mainly for Jetson TK1 support, but -next moved
some stuff around. Also enable some filesystems.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We can reuse the Tegra30 pinctrl driver, as the bit
layout is the same. Just add the pin and drivegroups
and some compile-time magic to avoid bloat.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If the bootloader doesn't init the architectural timer
on Cortex A15 Linux falls over when trying to boot.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
I don't know why get_runtime_offset fails on T124 yet,
but this is a safe workaround, with the nice side-effect
of fixing second stage barebox loading.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Don't disable clk to unrelated devices in the process.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Those 3 are needed to power CPU0 from the CPUG cluster.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Even the lowlevel functions are growing to a
size where having a stack seem beneficial.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In RCM aka recovery mode the BootROM waits for a
usbloader to take over control. On most boards this
is triggered by holding a physical switch which may
be inconvinient at times. Add a command to switch
into RCM from software.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It wasn't hard to find the right spot to copy the image
to before, but this makes it a bit more explicit.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The voltage for programming the fuses is external to the SoC and
on some boards this is controllable with a regulator, so add regulator
support to the iim driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Allow to read/write the registered MAC addresses in the iim
module directly via a device parameter.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The i.MX5 iim has an additional bit in the CCM module which
enables the supply. Add support for it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
imx_iim_read is a iim internal function, so access the
internal functions rather than using the cdev API.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With devicetree devicenames start with numbers. Parameters on these
devices are not accessible since variables can't start with numbers.
Register a logical 'iim' device which makes the permanent_write_enable
and explicit_sense_enable parameters accessible again.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of duplicating data shared between the banks in a bank
specific struct, use a iim struct and a bank struct.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* fix indentation of options in 'help bootm'
* add missing help for -m
* put some output into debug/verbose mode
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As stated in section 29.19.32 of SAMA5D3 Series datasheet, to move
from CS(n) to CS(n+1) the stride is 0x14 and not 0x10 as in the
other AT91 CPUs
Signed-off-by: Matteo Fortini <matteo.fortini@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The MB 77.07 is a small (80x80 mm) single-board computer
developed in Russia by the RC Module.
It was developed as an educational board for К1879ХБ1Я SoC
capabilities demonstration.
See http://www.module.ru/en/catalog/micro/micro_pc/ for details.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit adds minimal support for the UEMD SoCs
from RC Module (http://www.module.ru).
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Use stdout-path instead of linux,stdout-path and use &uart format
instead of writing the full path.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
I assume I am the only person knowing that barebox is able to
merge devicetrees. This feature seems broken for a while now since
trying to merge devicetress results in:
unflatten: too many end nodes
Remove this feature to save the complexity.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The ARM pbl is linked at (TEXT_BASE - SZ_2M). This conflicts with the temporary
stack used in s3c24x0_nand_boot. Moving the stack to (TEXT_BASE - SZ_2M) fixes
this problem. With this patch a compressed barebox with pbl can boot on
mini2440 from NAND.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sebastian Hesselbarth
Sascha Hauer
Antony Pavlov
Jan Luebbe
Philipp Zabel
Alexander Shiyan
Lucas Stach
Lucas Stach
Bo Shen
Holger Schurig
Matteo Fortini
Michael Olbrich
Silvio Fricke
Wadim Egorov