use random mac address with fixed OUI provided
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
take from linux next-20130227
same version as v3.11
before
-rwxr-xr-x 1 root root 123001 Feb 28 01:04 build/highbank/arch/arm/pbl/zbarebox.bin
after
-rwxr-xr-x 1 root root 122226 Feb 28 01:02 build/highbank/arch/arm/pbl/zbarebox.bin
smaller and faster
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
as today qemu does not support phy, it will return always 0x0 to any read
on the mii bus. So the phy_id is 0 and the link is donw.
To have the norwork running on versatilpb & other qenu board for the link up
at 100Mbps.
Only enable if qemu_fixup is set.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
None of the driver make the difference between STDOUT and STDERR.
So we just need to check if putc or getc are filled in the console_device
save 32 bytes on versatilepb
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
even if the env is broken you will have a password
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we guarantee that barebox is secured again user interaction
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Import of_find_node_by_type from Linux drivers/of/base.c -
commit id d8dfad3.
This function retrieves a node pointer based on the "device_type"
property of the node.
This is used by device tree update functions in PPC support.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Convert to static inline functions and use lower case letters for function
names. Also, include mach/debug_ll.h when an architecture provides support
for debug_ll, not only when it's actually enabled. This allows architecures
to put some UART initialization code into mach/debug_ll.h which is compiled
out when debug_ll is disabled.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add function for indirect access of the mmd registers, based on linux.
phy_read_mmd_indirect
phy_write_mmd_indirect
Also clean some private mmd functions
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The boards often have a sane default for the hostname. Provide a C
function for setting/getting it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of calling of_get_model() in barebox_get_model() add a
barebox_set_model() and use it to set the boardinfo once it's
available from the devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With this all code uses barebox_get_model() and no longer
a compile time generated string.
Also this renames barebox_boardinfo() to barebox_get_model()
since we are going to add the corresponding _set_ function
and 'model' corresponds to the devicetree notion.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Calling globalvar_add_simple() and setting a value is more than common.
Add a parameter for the initial value.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
of_get_tree_max_phandle - get the maximum phandle of a tree. Needed for
creating new phandles without conflicts.
of_node_create_phandle - create a phandle for a node which doesn't have one.
of_find_node_by_alias - find a node by alias name
of_find_node_by_path_or_alias - find a node by full path or alias name
of_find_root_node - find the root node for a given device node
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add empty definitions for mutexes, spinlocks and other stuff from
the kernel to make it easier to reuse code from the kernel.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
print_hex_dump is a standard kernel function, so move it outside
the ubi header files to make it usable for other code derived from
the kernel aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is a fresh UBI import from Linux v3.10
This is done mainly to get fastmap support.
This was tested with the i.MX nand driver, the MXS nand driver and
on CFI NOR flash.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To update to the latest UBI support from the Kernel first remove
the old UBI support. Without it the update will be even less reviewable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
No need to force a width of the pointer, so use void *. Also it's
not modified in memory_display, so also add a const.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This define allows to overwrite DMA_PIO_WORDS with an architecture
specific value. Since this is unused and not clean anyway remove
it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As the apbh dma engine is also found on i.MX6 move the header file
out of MXS specific directories.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
MXS specific devices have some common infrastructure in the kernel
known as STMP devices. We have the same in barebox, but with a
mxs_ prefix instead of a stmp_ prefix. As some STMP devices are
also found on i.MX6 move the common infrastructure out of MXS
specific files and use the stmp_ prefix.
This is done in preparation for i.MX6 NAND support.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This updates the NAND stuff to Linux-3.11-rc1. It is synchronized
as best as we can get:
- locks removed
- The splitting in different files we had to better support different
features has been dropped. Instead this is now done mostly with the
use of __maybe_unused
Some barebox adjustments are forward ported, like:
- Allow partial page writes
- Optionally allow to erase bad blocks
- check for all_ff before writing a page
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This introduces the ecc stength fields in the structures and fills
them in, but leaves them unused right now.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
No need to force a width of the pointer, so use void *. Also it's
not modified in memory_display, so also add a const.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The level of pr_err and pr_warning were interchanged.
Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds the possibility to configure the place for the environment
from the devicetree and to partition devices from the devicetree.
Configuration has the general form of devices with a regular compatible
property. This allows to later add additional drivers or drivers with
different behaviour (for example to add support for redundant environment).
The configuration is all in the /chosen/barebox/ hierarchy of the
devicetree. This separates the configuration from the hardware
description. Also it makes it possible to store the configuration
in a completely separate devicetree (or devicetree overlay). For
the same reason all configuration is done using nodepathes rather
than phandles.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
These functions allow to manipulate the "status" property of
devicenodes effectively enabling/disabling devices.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds support for extracting LZ4-compressed kernel images,
as well as LZ4-compressed ramdisk images in the kernel boot process.
This depends on the patch below
decompressor: Add LZ4 decompressor module
Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds support for LZ4 decompression in the Linux Kernel.
LZ4 Decompression APIs for kernel are based on LZ4 implementation
by Yann Collet.
LZ4 homepage : http://fastcompression.blogspot.com/p/lz4.html
LZ4 source repository : http://code.google.com/p/lz4/
Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
cdev_open() opens a cdev by name. This introduces cdev_do_open which
allows to open a cdev when the cdev is already found by other means.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
currently most partition cdevs have the name <devname>.<partname>
This makes it hard to find a partition by <partname>. This introduces
a partname field in struct cdev so that.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch moves support for MC34708 PMIC into mc13xxx driver.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This change will allow reuse this function for other buses.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
of_free is misleading about the actual purpose of the function. There is
already a of_create_node counterpart, so rename of_free to of_create_node
and update all users accordingly.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
struct device_node has its own resources and a pointer to associated
device_d. With recent platform related OF code, we can convert the
only user of it and remove those pointers from struct device_node.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This creates a Linux OF API compatible counterpart of of_get_named_gpio_flags.
Existing of_get_named_gpio is converted to a static inline function, which is
in the corresponding of_gpio.h include. While at it, drivers/of/gpio.c is
also renamed to drivers/of/of_gpio.c to follow the of_ prefix naming scheme.
The new include is also added to existing users of of_get_named_gpio.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This imports some bus and device related functions from Linux OF API
with some modifcations for Barebox.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
OF_ROOT_NODE_* defines should not be used outside of base.c. Move them
to drivers/of/base.c to ensure they will not be used elsewhere.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This converts existing of_translate_address to recently added API. In
contrast to existing behavior, the new function honors ranges properties
properly. It now allows reg properties to be set as offset with respect
to the correspoding parent node.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This imports drivers/of/address.c from Linux with some minor modifications.
of_translate_address is not yet enabled and PCI and ISA related bus translations
have not been imported. Also, a corresponding include header is created with
prototypes and non-OF function stubs.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Allows to reuse the clk gate code within other clocks.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Taken from the Linuxkernel with some small adjustments for barebox.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The code calculates the DDR2 SPD checksum as per JEDEC standard
No 21-C Appendix X (revision 1.2)
The code is based on the equivalent files from U-Boot version
git-a71d45d.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In the upcoming multi image build process we will cat images together.
To find the concatenated image we need to reliably find the end of the
current binary. This adds a dummy section at the end of a pbl binary.
Its only purpose is to mark the end of the image. The multi image
patches will add something to this section so that it doesn't get
discarded by the linker.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It becomes a common pattern for boards to find a device and
call device_detect on it. Add a convenience wrapper for it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If the driver is disabled provide a static inline wrapper for
mc34708_get() to prevent linker errors.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When using devicetrees the boardinfo (or model) can be obtained
from the devicetree. Add a function to get the boardinfo so that
we have a chance to add information from the devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently we can only (re)scan all USB hosts. Add a function to
scan individual hosts. This is useful for implementing the detect
callback in the next patch.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A command should not be interested in the internal USB core state, so
move the state handling into the core.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Embedding struct ata_ioports into struct ide_port saves us an allocation.
Making it available to client drivers is necessary to give them access
to struct ata_port which is needed in the next patch.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This cleans up include/of.h by moving some function prototypes below
CONFIG_OFTREE and provide bogus stubs for !CONFIG_OFTREE.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Remove device_node_for_nach_child and convert users to corresponding
imported OF API functions.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With of_get_child_by_name from Linux API, we can now convert and remove
of_find_child_by_name.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
This patch converts users of of_tree_for_each_node to recently added
for_eacg_compatible_node helper. Also of_tree_for_each_node is removed
from public OF API.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
This imports of_prop_next_u32, of_prop_next_string, and the corresponding
for_property_for_each_ helpers from Linux OF API.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
This adds functions to set an array of or a single value for bool,
u8, u16, and u64 properties.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
This imports of_parse_phandle_with_args and of_count_phandle_with_args
from Linux OF API. The slightly different of_parse_phandles_with_args
is removed and all users are converted to reflect the API change.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
This imports of_property_read_* helpers from Linux OF API to allow
to read all kinds of properties.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
This imports of_get_parent, of_get_next_available_child, and
of_get_child_by_name and corresponding helpers from Linux OF API.
of_get_next_child is not imported but implemented as list iterator
instead. Also, of_get_child_count and of_get_available_child_count
are introduced.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
This imports of_find_node_with_property and corresponding helpers
from Linux OF API.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
This imports of_find_matching_node_and_match and corresponding helpers
from Linux OF API.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
This imports of_find_compatible_node and corresponding for_each_compatible_node
helper from Linux OF API.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
This imports of_find_node_by_name and corresponding for_each_node_by_name
helper from Linux OF API.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
According to ePAPR 1.1 spec, device tree nodes status can be either
"okay", "disabled", "fail", or "fail-sss". Barebox already has a function
to check for "disabled" nodes, while Linux checks for "okay" or "ok".
To synchronize Barebox and Linux OF APIs, rename of_node_disabled to
of_device_is_available and check for "okay" instead of "disabled" as it
also makes "fail"ed devices unavailable.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Barebox of_find_node_by_path requires a node to be passed as start node
to start searching. Linux OF API does not pass this node and no current
user of it in barebox is passing anything else than the root node.
Therefore, we rename current function to of_find_node_by_path_from and
introduce a Linux OF API compatible of_find_node_by_path that always
passes the current root_node. Also, all current users of that function
are updated to reflect the API change.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To start synchronizing OF API of barebox with linux OF API, this adds
a length pointer to of_find_property. Also all current users of that
function are updated to reflect the API change.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Barebox compares compatible, node names, and property names with strcmp.
Linux by default compares compatible and node names with strcasecmp. To
avoid inconsitencies between Barebox and Linux dts files, we convert to
these default string compare functions.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
The tran_speed field as decoded from csd is valid in most cases,
so use it to determine the maximum clock we can support. It is
not valid though for MMC highspeed cards, in this case the
csd contains invalid values and we have to set tran_speed explicitly
to the maximum speed. As the values passed into mci_set_clock are
now based on tran_speed we no longer have to limit the rate to
tran_speed in mci_set_clock.
The (intended) effect of this patch is that highspeed MMC cards are
no longer limited to non highspeed rates.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On MXS we need to poll the busy bit when changing a clock rate, but only
when the parent clocks are enabled. This exposes the already present
function clk_is_enabled which is suitable for this job.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some tftp servers (for example netkit-tftp) do not pass the filesize.
Add a workaround for read_file which reads the file into a temporary
file which then is copied to a buffer.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Much of the bootm code is implemented in the command itself. Move
it to a common place to be able to call it from C aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
gotoXY has the argument order (y, x). Change this so that usage of this
function feels more natural.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To get persistent devicenames under /dev/ allow to set the
devicename from the driver instead of using "ata" unconditionally.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We need ata_id_has_lba48() in another C file, so move
the ATA_ID_* stuff to include/ata_drive.h like in the Linux
Kernel.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add mem_test routine. Useful to detect timing problems if someone
porting a new device to barebox. This test includes a data bus test,
address bus test and integrity check of memory.
This mem_test routine has as parameter start and end address of testing
space. The last parameter can skip the integrity check.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Linux normally has no idea how to retrieve MAC Addresses, but instead
expects the MAC address in the devicetree. This patch adds the MAC
address to the devicetree for Linux if we find a valid one in barebox.
This mechanism is limited of course to devices barebox has a driver for
and which are probed themselves from the devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Use MMC_CAP_ names instead of MMC_MODE_. This makes it more
clear that these are capabilities of host/card and do not refer
to the current mode. These are in line with the Linux Kernel
except for MMC_CAP_MMC_HIGHSPEED_52MHZ which could be fixed
later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
I'm not sure but I guess we don't need defined(__I386__) check.
I kept it for now.
Signed-off-by: Masaki Muranaka <monaka@monami-ya.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We often encounter the situation where slow devices should not be
probed during startup since probing is slow and maybe unnecessary
for unused devices. With MMC we have the 'probe' device parameter,
for ata we have the same, for USB we have the 'usb' command. Overall
this is not very consistent.
With MMC there is the additional problem that the probe parameter
is attached to the logical device when we often have the information
which physical device we want to probe.
This patch adds a 'detect' callback for devices and adds a command
to detect devices and to list the devices which are actually detecable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some drivers use blk->ops->read/write. This bypasses the caching block
layer and was never intended like this. The upper API to the block layer
is the cdev layer. This patch adds block_read and block_write functions
and uses them where appropriate.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds several missing includes to files under include/ which
we relied on being included implicitly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Without devicetree support we print the Kernel commandline in
verbose mode. Do the same with devicetree boot aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since the info is device specific and not driver specific, attach
the callback to the device. This makes it possible to have a info
callback for a device which does not have a driver attached.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some MMC cards support boot partitions. These are special regions
on the MMC card intended to put a bootloader on.
This patch adds support for these partitions, they are accessible
as /dev/diskx.boot[0|1].
Additionally the partitions can be configured bootable using a
device parameter. This can be used to mark the user area or one
of the boot partitions as bootable.
Since this feature is mostly seen on eMMC cards it is made optional
to lower the size impact for boards which do not have eMMC.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We recently gained helper functions for different types of
device parameters. One thing missing was a helper for an
enum type parameter. This patch adds this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some parameters may wish to provide some information about their
meaning or possible values. Provide an info callback for parameters.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We already have a possibility to register a MAC address provider
based on a ethernet device id. This adds a similar functionality
for devices probed from devicetree. Code can register itself to
be a MAC address provider for a certain devicetree node.
This helps on i.MX to let the IIM unit provide a MAC address for
the FEC.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this fix the problems introduced when detecting non ONFI flashes in
commit 4c2bdc8728
"nand_base: detect more ONFI flash"
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch separates out the "generic" memory
segment registration function (of_add_memory_bank())
from of_add_memory().
The MIPS architecture has different view on memory
resources than the ARM and PPC architectures
so the "generic" of_add_memory_bank() is
unusable for the MIPS architecture.
We can add MIPS-specific of_add_memory_bank()
into arch/mips code.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is a massively stripped down pinctrl support. The upper API
consists of only of:
int pinctrl_select_state(struct device_d *dev, const char *state);
This is used to setup the pinmux for a device to a certain state.
This function normally does not need to be called manually. The
device core will setup the default state before probing a device.
The pinctrl core has the job of handling the devicetree. It parses
the pinctrl phandles for a device from devicetree, finds the correct
pinctrl device and calls its set_state callback with the pinctrl
setup device node.
The simplicity of this pinctrl framework comes from the fact that
we:
- Limit usage to devicetree only for now. For non devicetree use the
old legacy SoC specific APIs still can be used.
- Do not parse the devicetree into internal data structures which
are used by the drivers later. This adds the overhead that we
may parse the devicetree multiple times for more dynamic setups,
but on the other hand we do not need to parse devices from the
devicetree we don't use in barebox
- Do not detect resource conflicts. Since the framework mainly is
a devicetree parser this would be hard to implement. It should
be easy for board maintainers to avoid resource conflicts though.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
pass a struct cdev instead of the cdev name to of_parse_partitions.
This is available to the caller anyway and makes it easier to use
additional stuff from the cdev (like knowing whether it's a mtd
device).
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We do not have usb_driver_unregister function, so remove this declaration.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
memory_display is a function which should generally be available.
Currently it depends on memory command support being compiled in,
so move the function to a separate file.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The memory commands all use open_and_lseek and mem_parse_options. Export
them to be able to split the memory commands into separate files.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Rather than storing the parameters globally and trying to keep them
in sync with the device parameters, store the parameters in the ethernet
device directly. Also, update to dev_add_param_ip().
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds convenience functions for directly registering integers
and bools as device parameter. This way driver no longer have to
fiddle with string handling. The format used to print the parameter
is passed to the functions to be able to print parameters in a
flexible way.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
of_get_phy_mode to parse the phy mode from the devicetree and
of_get_mac_address to parse a MAC address from the devicetree.
Directly taken from the Kernel.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add a C interface to set and get the bootsource instance:
int bootsource_get_instance(void);
void bootsource_set_instance(int instance);
Also export the shell variable "bootsource_instance".
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch seperates the imx independent from the arch independent code. The
following functions and enums are renamed:
- imx_bootsource() -> bootsource_get()
- imx_set_bootsource() -> bootsource_set()
- enum imx_bootsource -> enum bootsource
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The macb/gem core is used by the Zynq SoC. In preparation of sharing
the macb driver between at91 and Zynq, rename the platform data to
'struct macb_platform_data', and move the definition to a common
location.
Signed-off-by: Josh Cartwright <joshc@eso.teric.us>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Commit 51f2ded17c ("param: make return
value of param getter function const") made the parameter getter const,
but neglected to change the dev_add_param() function prototype in the
!CONFIG_PARAMETER case.
Fixes the following warning with CONFIG_NAND and !CONFIG_PARAMETER:
drivers/mtd/nand/nand_base.c: In function 'add_mtd_nand_device':
drivers/mtd/nand/nand_base.c:1720:2: warning: passing argument 4 of 'dev_add_param' from incompatible pointer type [enabled by default]
include/param.h:59:19: note: expected 'char * (*)(struct device_d *, struct param_d *)' but argument is of type 'const char * (*)(struct device_d *, struct param_d *)'
Signed-off-by: Josh Cartwright <joshc@eso.teric.us>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add basic support for the Xilinx Zynq-7000 EPP architecture.
The Zynq-7000 is an embedded processing platform that combines a Cortex A9
dualcore MPSoC with an Artix-7 FPGA.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This allows us to better detect whether a clk is enabled or not.
- If we can ask a clk, ask it. If it's enabled, go on and ask parents
- If we can't ask it, but it can be enabled, depend on the enable_count.
if it's positive, go on and ask parents
- If we can't ask it and it cannot be enabled, assume it is enabled
and ask parents.
This makes the CLK_ALWAYS_ENABLED unnecessary, since the fixed clk now
always returns 1 in its is_enabled callback.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
struct bus_type contains an embedded struct device_d which is quite
a big structure. Dynamically allocate this instead to save the space
in the binary.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch extends device_platform_driver macro, so now we allow
use it with various init levels and subsystems.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add rules to generate dtb files from dts/dtsi files,
optionally run the source files through the preprocessor.
Also add a rule to generate object files to include in
the barbox binary.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds support for system controller register driver (SYSCON).
Code taken from Linux Kernel and adapted for using in barebox.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds helpers to define resources, such as
DEFINE_RES_NAMED, DEFINE_RES_MEM and DEFINE_RES_MEM_NAMED.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds generic memory-mapped GPIO controller support.
Code taken from Linux Kernel and adopted for barebox.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
ata device usually take a long time to spin up, so it makes sense
to only spend this time when the device is actually used.
This adds a logical ata device and attaches a 'probe' parameter
to it, similar to what MMC does.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
__pr_printk is a define which uses a local variable 'ret'. This
means that whenever someone does a pr_*("ret: %d\n", ret);
ret will be 0.
Fix this by writing this without a local variable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This makes it possible to modify the tree in the handlers.
This is necessary because the initrd addresses are only
known inside the handlers, but not to the generic bootm
code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With this every devicetree is first converted to the barebox internal
format before it's converted back to dtb again.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
OFDEVICE decides whether or not we compile in support for probing
devices from the devicetree. Let the user decide this explicitly.
This makes the oftree, of_node and of_property commands independent
of devicetree device support since being able to manipulate
devicetrees has nothing to do with probing devices from the devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In order to be able to handle multiple devicetrees, do not assume
the tree to be unflattened is the barebox internal one. Instead,
just return a pointer to it and assign the barebox internal root_node
external to the unflatten function.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The allnodes list makes it hard to handle multiple devicetrees. Having
a list to iterate over all nodes of a tree is still good to have though.
This patch uses the list_head of the root node as the head of the list.
This way the root node is no longer part of the list, but when iterating
over a tree the root node is not interesting anyway.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This file is present in current kernels. In order to get closer
to current mtd support introduce it for barebox aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
While erasing bad blocks is a potentially dangerous operation
it is sometimes needed during development or when some foreign
code has touched the flash.
This patch adds a device parameter 'erasebad' to allow erasing
bad blocks. Since this is not wanted during production this is
behind a Kconfig option.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This allows us to have some NAND specific stuff during registration,
like for example adding NAND specific device parameters.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The problem was introduced in
commit 51885a7d73
Author: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu Jun 28 09:56:23 2012 +0200
Change byte order detection mechanism to kernel style
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The roundup_pow_of_two function is making use of __roundup_pow_of_two
when the call to __builtin_constant_p fails, which is not implemented in
barebox.
Copied the code from Linux log2.h header.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
do not try to read the status in force mode
the link is up
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- heavily copied from register_persistant_environment which was
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Do not write pages which only contain 0xff. UBI expects pages which
seem empty to be writable. This got lost with:
| commit 3139c3e9a6
| Author: Sascha Hauer <s.hauer@pengutronix.de>
| Date: Thu Nov 29 11:16:40 2012 +0100
|
| mtd core: call driver write function with complete buffer
|
| mtd->write is supposed to loop around pages internally, no need
| to do this in mtd_write. This fixes a huge write performance drop
| with the m25p80 driver when it was converted to a mtd driver recently.
| Since mtd->writesize is 1 for this driver mtd_write ended up doing
| single byte writes on the flash.
Introduce mtd_all_ff as a global function since UBI currently has its own
implementation.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add pread and pwrite functions.
Split read and write functions to save some space.
The functions pread and pwrite saves and sets the file
position to a given offset and restore them afterwards.
This also makes the nandtest command use these function
which is necessary to not break compilation for the nandtest
command.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch provides rename MFD-related symbols for using MFD-prefix.
Additionally, sorting mfd/Kconfig and mfd/Makefile records.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
form linux 3.8
so you can have part by num or name
not by GUID as this is a non human reading name
`---- ffe08000.sata
`---- 0x00000000-0x3fffffff: /dev/ata0
`---- 0x00100000-0x063fffff: /dev/ata0.0
`---- 0x00100000-0x063fffff: /dev/ata0.boot
`---- 0x06400000-0x3fefffff: /dev/ata0.1
`---- 0x06400000-0x3fefffff: /dev/ata0.linux
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
GPT need to be check before MBR
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
need it by upcoming EFI GPT support
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
__dev_printf is a define which uses a local variable 'ret'. This
means that whenever someone does a dev_*(dev, "ret: %d\n", ret);
ret will be 0.
Fix this by writing this without a local variable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds USB gadget support to the i.MX chipidea driver. Basically
we have to add a register function to the fsl udc driver and call
this from the chipidea driver if device mode is selected.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Kernel has mtd_read, mtd_write, mtd_erase and mtd_block_markbad.
Add these functions to barebox aswell to make future mtd synchronizations
with the kernel easier.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The kernel nowadays has mtd_read/write and other functions. In
barebox we also have these functions, but with a different prototype,
namely they correspond to the libmtd userspace functions. Rename
these functions to libmtd_* to avoid name clashes with future mtd
updates.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some controllers need an init hook after the USB controller is
started, so implement the post init hook for i.MX.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so when the first stage booloader of firmware provide the dtb
we can use it to probe the memory
also allow to print what we probe
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
device_platform_driver() - Helper macro for drivers that don't do
anything special in module registration. This eliminates a lot of
boilerplate. Driver registration will called on device_initcall.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can use it on vexpress to detect the hardware mapping
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add the initrd start and end address to the DT, code comes from u-boot.
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
detect the cpu model to dynamise the periphs mapping
currently only tested on qemu but should work on real hardware
Cortex-A9
if you use 1GiB of ram you can run the same barebox on Cortex-A15 or Cortex-A9
otherwise use vexpress_ca9_defconfig where the TEXT_BASE is at 0x63f00000
when we will add the relocation support this defconfig will be drop
qemu/arm-softmmu/qemu-system-arm -M vexpress-a9 -m 1024 -smp 1 -kernel build/vexpress/barebox -pflash build/vexpress/flash0 -nographic
Cortex-A15
qemu/arm-softmmu/qemu-system-arm -M vexpress-a15 -m 1024 -smp 1 -kernel build/vexpress/barebox -pflash build/vexpress/flash0 -nographic
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Change getopt optstring parameter type to const char *.
Also change type to const char * of tmp variable which
pointed to optstring. This will only handle readonly.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Defining STACK_BASE and MALLOC_BASE only makes sense when
either CONFIG_MEMORY_LAYOUT_DEFAULT or CONFIG_MEMORY_LAYOUT_FIXED
is set, so use separate #ifdefs instead ot #if/#else
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Jean-Christophe PLAGNIOL-VILLARD
Renaud Barbier
Jan Weitzel
Hubert Feurstein
Kyungsik Lee
Alexander Shiyan
Sebastian Hesselbarth
Lucas Stach
Alexander Aring
Masaki Muranaka
Eric Bénard
Antony Pavlov
Jan Luebbe
Marc Kleine-Budde
Josh Cartwright
Steffen Trumtrar
Vicente Bergas
Maxime Ripard