When a mtd device can have bad blocks we want to create a
bb device, so do this automatically. This allows us to
drop bb device creation from the environment.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The purpose of envfs_register_partition is to print an error
message when the partition does not exist. Print an error message
from generic code instead and drop this function.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Not needed anymore, as barebox sets this up itself now.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We need to reprogram PLL_P at a later time, so
we have to make sure MSELECT is able to operate
correctly when we stop PLL_P.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
fno-jump-tables isn't enough to guard against
gcc switch optimizations that are unsafe to use
in code that runs before relocation.
The switch-tree-conversion opt pass may generate
lookup tables that are placed in the data section
and accessed via absolute adressing, which fails
prior to relocation.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This most likely doesn't fix any real bugs, but it's the
right thing to do and reduces the noise level with static
checkers.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Otherwise SAM A5d35 would be detected as A5d36.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The current implementation fakes a memory-mapped I/O device
at 0x3f8 and 0x2f8, then uses platform read/write functions
to do the actual reading and writing. These platform functions
only exist for the x86 platform; better to move the I/O
routines into the driver and have the driver request I/O ports
using request_ioport_region.
Signed-off-by: Michel Stam <michel@reverze.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Otherwise reading or writing to the SPI flash doesn't
work.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Rework the current framework so that I/O mapped I/O resources are
also possible.
Signed-off-by: Michel Stam <michel@reverze.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For a version 1.0 board the rest of loco_late_init should be executed
to completely configure the board.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The board code does a phy reset. This implicitly requests the phy reset
gpio. This gpio is also registered in the devicetree as phy reset gpio,
so the fec driver probe can't request the gpio and bails out with -EBUSY.
Fix this by freeing the phy reset gpio in the board code. While at it use
gpio_request_array for the gpios.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds CBUS UART dts support;
also it adds the necessary macros for DEBUG_LL.
qemu-malta supports three serial interfaces:
* two ports are provided by the FDC37M817
Super I/O; this chip is connected via LPC bus
to Intel 82371EB (PIIX4E) South Bridge;
* the third serial port is provided by
the discrete TI 16C550C (CBUS UART);
this chip is connected via CBUS directly
to the board's GT64120 North Bridge.
See Malta User's Manual (MD00048) for details.
CBUS UART Instructions for use:
1. Enable CONFIG_CONSOLE_ACTIVATE_ALL in .config
(or disable uart0 in dts) and compile barebox;
2. run qemu:
qemu-system-mips -nographic -nodefaults \
-monitor null -M malta -m 256 \
-serial null -serial null -serial stdio \
-bios barebox-flash-image
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add an environment partition and support commands so that the system
configuration can be permanent.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
SAMA5D36 SoC is a sub type of SAMA5D3 which has two Ethernets
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is needed so that the IPU framebuffer scanout cannot be
starved by VPU or GPU activity.
Some boards like the SabreLite and SabreSD seem to set this in
the DCD already, but the documented register reset values do not
contain the necessary settings.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds the IPU, LVDS and HDMI clocks. As these are many, depend
on the IPU driver being compiled in.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This board support code can be used for TP-LINK WR703 too.
TP-LINK WR703 is very similar to TP-LINK MR3020, there are
some non-essential differences:
* WR703 is smaller and cheaper;
* WR703 has only one led, but MR3020 has five leds;
* MR3020 uses mini-USB connector, WR703 uses micro-USB connector.
See https://forum.openwrt.org/viewtopic.php?id=45159 for details.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Use the mach-ath79 name for compatibility with linux kernel.
Signed-off-by: Du Huanpeng <u74147@gmail.com>
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit is based on
commit fa1a406f72
Author: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: Sat Nov 9 14:24:18 2013 +0100
ARM: lib: add BAREBOX_CLK_TABLE to linker script
This adds an .oftables section right before .dtb section with
BAREBOX_CLK_TABLE to ARM linker script.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Here is my error log:
CC common/startup.o
In file included from arch/mips/mach-xburst/include/mach/debug_ll.h:25,
from include/debug_ll.h:31,
from common/startup.c:36:
arch/mips/include/asm/debug_ll_ns16550.h: In function 'PUTC_LL':
arch/mips/include/asm/debug_ll_ns16550.h:62: error: 'DEBUG_LL_UART_ADDR' undeclared (first use in this function)
arch/mips/include/asm/debug_ll_ns16550.h:62: error: (Each undeclared identifier is reported only once
arch/mips/include/asm/debug_ll_ns16550.h:62: error: for each function it appears in.)
make[1]: *** [common/startup.o] Error 1
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
TX_CLK line is approx. 54mm longer than other TX lines which adds
a delay of 0.36ns. RGMII need a delay of min. 1.0ns. This mean we have to add
a delay of 0.64ns. We choose 0.78 to have a little gap. This can be done by
setting GTX pad skew value to 11100
Also add a delay for the RX delay lines, needed for the Duallite variant.
=> Set register 2.8 (RGMII Clock Pad Skew) to 0x039F.
Signed-off-by: Christian Hemp <c.hemp@phytec.de>
All MIPS board use <vendor>-<model> name template save Ritmix RZX-50.
This commit fixes this inconsistency.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We use dts for serial port initialization,
so we have no need in mach-xburst/serial.c anymore.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Otherwise it won't get set in a multiimage build.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The virt2real microcontroller, or virturilka,
is a miniature board for creation of WiFi
or internet controllable smart devices.
See http://virt2real.com for details.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Kconfig and make files are updated to build the Freescale P1022DS
image.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The eTSEC 2.0 devices found on the 85xx family of SoCs support stashing
buffer descriptors in the L2 cache. This updates the device tree fixup
for these devices to ensure that the stashing related properties used
by Linux are initialised correctly.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support for the Freescale P1022DS. Driver support is limited to:
- I2C
- Ethernet
- Serial
- NOR flash
- PIXIS FPGA
System clock configuration is read from the FPGA but has only been
tested using a 133MHz system clock and 100MHz DDR clock.
Boot arguments are defined in the environment to boot over NFS with
a console configured at 115200 bauds.
Enabling branch prediction is moved from board support to the platform
support for all boards as it is a CPU feature.
Some the code is from U-Boot version git-be937b5.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add DDR3 support into the MPC8xxx DDR driver.
To avoid confusion, the function set_ddr_sdram_mode is renamed
set_ddr2_sdram_mode.
Checking for errors is simplified in the DDR2 DIMM parameters
computation to be consistent with DDR3.
This code is derived from the files found in directory drivers/ddr/fsl
from U-Boot version git-be937b5.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add DDR3 SPD verification support for use by the PPC 8xxx DDR driver.
This is based on the equivalent files from U-Boot version git-be937b5.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
CPU, DDR, and LBC definitions are added to support the Freescale P1022.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This driver is dts-only version of driver from Linux v3.14-rc5.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit adds minimal support for the DaVinci DM365 SoCs
from Texas Instruments.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This macros are used in exported from linux TI DaVinci code.
Also this macros are used in MIPS cache support code.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For memory reaching the end of the address space
phys + bank->size overflows to 0. Fix this by right shifting
phys and bank->size before adding them.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Sean Cross <xobs@kosagi.com>
- If we have no memory registered in mmu_init() it's a critical bug.
panic in this case.
- If we do not have a ttb when dma_alloc_coherent or remap_range is
called it's also a critical bug. Panic in this case.
- if find_pte is called with an address outside our memory banks dump
the memory banks and the address to give more clue what went wrong.
Also add some hints what might went wrong to the code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>