this allow to do not provide block_isbad at mtd driver level
as example spi flash
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
use irq pin as the pin is asserted untill we clear it
This will allow to do not poll on i2c which slow down barebox
If no irq_pin is provided fall back on i2c polling
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The filetype strings are not really suitable for shell scripts, so
add a shortname array of filetypes usable for shell scripts.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will allow to avoid issue with resource order
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This switches environment variables to use linux list. This is easier
to read. An additional plus is that the environment variables no longer
need an initcall, so malloc is the only requirement for them.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Based on linux implementation.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
is_timeout call poller_call if the timeout is >= 100us
but on 1-wire bus we need to wait 500us and not more than 930us
for the bus reset. So if the poller_call is caller we can not guarantee it.
So for this introduce is_non_interruptible_timeout than we only wait.
Use it for ndelay too.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently in-system update means to write an arbitrary file to
an arbitrary device. There is no sanity check if the flashed image
is of the right type or will fit onto the device. Furthermore some
SoCs need a special preparation step for their images before
flashing them.
This adds a barebox in-system update infrastructure. Boards can
register update handlers which know how to make the board bootable.
The available handlers can be listed to be able to select one,
different force levels give the user the chance to know it better.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If none set use NA (0) as before.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When a memory bank is already registered, return an error code
instead of throwing a bug. This can happen if a board has registered
a memory bank and the same bank is then probed from the devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Do not blit the surface everytime we write an image
As we want to able to render multiple image this will cause 1 blit per image;
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To open, memmap, get the fb_info and if needed allocate the offscreen buffer
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of passing hundreds of parameter, just pass the right structure.
struct screen represent the screen with a without double buffering.
struct surface represent the part of the screen we want to render.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is needed if the image is bigger than the screen.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can pass -1 for auto detect
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds barebox common clk support loosely based on the Kernel common
clk support. differences are:
- barebox does not need prepare/unprepare
- no parent rate propagation for set_rate
- struct clk is not really encapsulated from the drivers
Along with the clk support we have support for some basic clk building
blocks:
- clk-fixed
- clk-fixed-factor
- clk-mux
- clk-divider
clk-fixed and clk-fixed-factor are completely generic, clk-mux and clk-divider
are currently the way i.MX muxes/dividers are implemented.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Most clock/device associations can be done based on the physical
base address of the corresponding device. So instead of depending
on string matching add an optional possibility to associate a clock
lookups with physical addresses. This also has the advantage that
the lookups for devicetree based devices can be identical to the
platform based devices.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Also pass flags using platform_data and remove useless casts from void*.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Adapt phylib from linux
switch all the driver to it
reimplement mii bus
This will allow to have
- phy drivers
- to only connect the phy at then opening of the device
- if the phy is not ready or not up fail on open
Same behaviour as in linux and will allow to share code and simplify porting.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
This is need for oftree device probing
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow reduce the number of driver and device to search on.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We may have some disk with MBR as a first sector. In this case, the
current FAT check returns an error. However, the FAT sector exist and
the MBR can tell us where it is.
This patch add to file_name_detect_type function the ability to find
the FAT boot sector on the first sector of the first partition in case
it is not on sector 0.
It also introduce is_fat_or_mbr to check if a buffer is a FAT boot
or MBR sector
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds code to probe devices from a devicetree. Most helper
functions are directly imported from Linux.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It is common for drivers to handle multiple similar devices. On
Linux the driver can distinguish between the devices using the
platform_device_id mechanism. Introduce the same for barebox.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Printing device context normally should be "driver instance:",
but instead we printed the device name twice. This patch fixes
this and as a bonus makes the binary a bit smaller. Instead of
a '@' between driver and instance this function now prints a
whitespace which is a bit more like Linux.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds a I2C bus on which the I2C devices and drivers register.
This makes it cleaner as I2C devices won't accidently end up probed by
a platform_device driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds a SPI bus on which the SPI devices and drivers register.
This makes it cleaner as SPI devices won't accidently end up probed by
a platform_device driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
This patch sync the image type list with the kernel in order to add
openrisc support.
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will allow to render rgba image with or without hw support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to support bmp and png
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
So we can add other format support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to detect the amba device and use the right driver for it at
runtime.
The code is base on linux 3.5.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Add functions to read the barebox_arm_head, check barebox magicword
and read out the barebox image size.
Create a inital partion of 1Mb to access the barebox image on nand.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The stmpe mfds can be connected via i2c and spi. This driver provides the basic
infrastructure for the i2c kind. It can be added as a normal i2c-device in the
board code. To enable functions a platform_data struct has to be provided, that
describes what parts of the chip are to be used.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Introduce a struct envfs_inode_end with more data.
Today this will just containt the file mode to be able to add the symlink
support.
But this is compatible with the previous envfs version as they will do not
care about the extra as the previous version is just reading the filename and
then consume the extra data without using them.
Increase the envfs version to 1.0
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
they are store in the super block at byte 16th and 17th.
set the verison at 0.1
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
For compatibility put a inline on lstat for stat until we have the symlink
support.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Board support units must use only the provided functions.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
switch ipe337: to it at the same time to do not brake it
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can have the same behaviour as in the kernel for id = -1
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This introduces a new NAND_BUSWIDTH_AUTO flag which can be used
to automatically detect the nand buswidth. The id is always read
in 8bit mode. An additional callback is needed to switch the nand
controller into 16bit mode.
This currently depends on a safe read_byte (always) and read_buf
(for onfi-only flashes) callback. It has been tested on OMAP, but
is not something that generally works. For this reason the existence
of the set_buswidth callback is used to determine whether we are
able to do autodetection or not.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This allows for creating a lzo compressed binary unsing the pbl.
Only copy the piggydata if needed.
Add CONFIG_PBL_FORCE_PIGGYDATA_COPY option
In some case we need to copy the PIGGYDATA as the link address
as example we run from SRAM and shutdown the SDRAM/DDR for
reconfiguration but most of the time we just need to copy the
executable code.
based on Sascha Hauer
Add compressed image support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
This allows for creating a pre-bootloader binary for
- nand boot
- mmc boot
- compressed image
The pbl will be incharge of the lowlevel init if needed.
The barebox will skip it.
Import string functions from linux 3.4 (arch/arm/boot/compressed/string.c) and
implement a dummy panic.
For now on introduce dummy zbarebox* targets and c code that will contain later
the decompressor. This only implemeted on ARM.
This patch is based on Sascha Hauer <s.hauer@pengutronix.de>
Add compressed image support patch
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Some drivers use gpio_request/gpio_free. Currently no architecture
has code behind these functions. Provide static inline functions
for these and remvoe the at91 specific inline functions.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
From Linux commit 69349c2dc01c489eccaa4c472542c08e370c6d7e:
Using IS_ENABLED() within C (vs. within CPP #if statements) in its
current form requires us to actually define every possible bool/tristate
Kconfig option twice (__enabled_* and __enabled_*_MODULE variants).
This results in a huge autoconf.h file, on the order of 16k lines for a
x86_64 defconfig.
Fixing IS_ENABLED to be able to work on the smaller subset of just
things that we really have defined is step one to fixing this. Which
means it has to not choke when fed non-enabled options, such as:
include/linux/netdevice.h:964:1: warning: "__enabled_CONFIG_FCOE_MODULE" is not defined [-Wundef]
The original prototype of how to implement a C and preprocessor
compatible way of doing this came from the Google+ user "comex ." in
response to Linus' crowdsourcing challenge for a possible improvement on
his earlier C specific solution:
#define config_enabled(x) (__stringify(x)[0] == '1')
In this implementation, I've chosen variable names that hopefully make
how it works more understandable.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The ep93xx needs a special value at offset 0x1000. Rather than
do special handling in the linker file add aa header section
as done on i.MX.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The name "serial_ns16550" is not handy because the devices
will have the names like "serial_ns165500", "serial_ns165501",
"serial_ns165502" etc.
The names like "ns16550_serial0" and "ns16550_serial1" look
much better.
Also it is reasonable to make serial driver's names unification.
E.g. see the names for drivers in drivers/serial directory:
"netx_serial",
"mpc5xxx_serial",
"altera_serial",
"s3c_serial",
"imx_serial",
"pxa_serial",
"blackfin_serial",
"stm_serial",
"pl010_serial",
and even "g_serial" in ./drivers/usb/gadget/serial.c
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Many architectures support a way to detect why the bootloader is running.
This patch adds a global variable to be able to use the cause in some kind of
shell code to do special things on demand. For example to do an emergency boot,
when the last boot fails and the watchdog reactivate the hanging system.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
the code is taken from linux & u-boot implementations
Validated on an i.MX53 which gives the following log :
ONFI flash detected ... ONFI param page 0 valid
NAND device: Manufacturer ID: 0x2c, Chip ID: 0x38 (Micron MT29F8G08ABABAWP), page size: 4096, OOB size: 224
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The standard devices are currently broken since they have
the size ~0. As now files use loff_t as file size which is a signed
type the read implementation gets confused and now returns -1.
The current implementation also has the (somewhat theorical) problem
that we do not have real streaming devices, so /dev/zero went out
of zeroes after reading 4GB (or now LLONG_MAX).
This patch introduces a new cdev flag DEVFS_IS_CHARACTER_DEV and a new
file size flag FILE_SIZE_STREAM which makes it possible to create
real stream devices instead.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Storing the size instead of the resource end in struct resource was
a mistake. 'size' ranges from 0 to UINT[32|64]_MAX + 1 which obviously
leads to problems. 'end' on the other hand will never exceed
UINT[32|64]_MAX. Also this way we can express a iomem region covering
the whole address space.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reduce confusion by making clear six bytes are passed,
not a string.
Signed-off-by: Johannes Stezenbach <js@sig21.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Change function name to command_var_complete in all calls and its declaration.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some drivers call dma_inv_range() on buffers, on arm these buffers must
be cache line aligned. This patch introduces a generic dma_alloc,
dma_free. Archs can implement in their own functions in "asm/dma.h" and add a:
#define dma_alloc dma_alloc
#define dma_free dma_free
On all other archs the generic versions, which translate into xmalloc
and free are used.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds a simple wd command which can setup, trigger and stop a watchdog
on the platform.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
include/linux/time.h contains several unused functions derived from U-Boot
code. Since this is a file under include/linux/ it should contain only code
from the kernel, so remove all this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Linux Kernel defines only one of __LITTLE_ENDIAN and
__BIG_ENDIAN. Endianess can then be tested with #ifdef __xx_ENDIAN. Userspace
always defined both __LITTLE_ENDIAN and __BIG_ENDIAN and byteorder can then
be tested with #if __BYTE_ORDER == __xx_ENDIAN.
As we tend to use a lot of Kernel code in barebox we switch to use the kernel
way of determing the byte order.
As this always causes a lot of confusion add a check to include/common.h to
make sure only one of __LITTLE_ENDIAN and __BIG_ENDIAN is defined.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Straight forward port of Synopsys Designware ethernet
driver from u-boot v2012.04.01.
Signed-off-by: Johannes Stezenbach <js@sig21.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
resource_size_t can be 32bit or 64bit depending on the architecture.
Add a define for it to be able to printf a resource_size_t correctly
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When barebox headers get included from HOSTCC tools they should not
include other architecture specific headers as barebox might get
cross-compiled. Instead, the tool itself should include "compiler.h".
Signed-off-by: Dirk Hörner <dirker@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently magicvar fails on variables containing a '.' because we can't
use these as C names. Overcome this by adding a new macro which allows
to specify a name seperately.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We currently use the environment variable 'bootargs' to get the
Linux bootargs. This patch allows for a more flexible bootargs
generation using global variables. With it the Linux bootargs
are concatenated from multiple variables. This allows to replace
parts of the bootargs string without having to reconstruct it
completely.
With this bootargs can be constructed like:
global linux.bootargs.base="console=ttyS0,115200"
global linux.bootargs.ip="ip=dhcp"
global linux.mtdparts="physmap-flash.0:512K(nor0.barebox),-(root)"
This will then automatically be combined into a kernel bootargs
string during boot.
If the 'linux.bootargs.' variables are all empty the old standard
'bootargs' way will be used.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This implements global shell variable support. This is done by registering
a new device named 'global', so global variables are just plain device
parameters.
Global variables are useful for storing the global state in the environment.
Currently we do this by sourcing scripts instead of executing them which is
quite limiting.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add this definition in preparation for the introduction of the
mpc85xx support.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
cpu_read*() and cpu_wrire*() are precisely equal to __raw_read*() and
__raw_write*().
Striving for correctness we can replace all those __raw_*() with cpu_*()
as that's exactly what the former ones do.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Useful for allocating a string list entry on the fly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Allocate the string in string list seperately instead of
embedding a zero length string into struct stringlist.
Besides looking cleaner this allows us to implement a
string_list_asprintf.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Some phys need board specific fixups. To be able to do this
from board code add mii_open/mii_close functions so that the
board can use the regular mii_read/mii_write functions.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently only 100Mb/s is tested. Freescale's U-Boot suggests that
there are some additional adjustments necessary for Gigabit support.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to execute any file and detect it's type to handle it.
This will allow to use shell for bootp bootfile or dfu.
You can register multiple hook for the same filetype. They will be execute
in the invert order of register. If a hook does not handle the file you just
return -ERESTARTNOHAND;
This is only available with hush parser.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Currently all devices have an id meaning that all devicenames
end with a number. This patch adds a DEVICE_ID_SINGLE to make
it ppossible to register a device without an id assigned to
it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Android Image contains 3 components and params
- kernel
- initrd
- second stage (optional)
- tags addr
- bootargs
In fast boot the initrd is mandatory, in barebox we are less restrictive
use the initrd only if present
add to env params:
aimage_noverwrite_bootargs
Disable overwrite of the bootargs with the one present in aimage
aimage_noverwrite_tags
Disable overwrite of the tags addr with the one present in aimage
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
You can now use AINSI color in the display of the menu or menu_entry.
As the length of the string is not any more the same as the display simplify
the invertion display managemnent.
We just now invert the fontground and backgound on the string itself as done
in Kconfig.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Introduce getenv_ip_dns to be able to do not do the resolv when using it in
resolv for the nameserver (Do not loop).
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Since we do not have ISP1504-related functions, we migrated to ULPI.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Added ULPI detection function.
Same function from isp1504 driver removed.
Used implementation from Linux kernel.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
These registers can be used for any standart ULPI chip,
not only for ISP1504.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds an automount command which makes it possible
to execute a script when a certain directory is first accessed.
It's the commands responsibility to make this directory available
(bringing devices up and mounting it). This results in automount
support which makes sure that from the shell every file can
be accessed without having to care for device bringup. Bringing
up devices may be expensive (USB, dhcp). The automount support
makes it easy for the environment to bringup devices when they
are actually needed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
every struct fs_device_d contains a struct mtab_entry, so they
have a 1:1 relationship. Instead of having to use container_of
to get from a struct mtab_entry to a struct fs_device_d we can
better embed the members of struct mtab_entry into struct fs_device_d
directly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support for KS8851 16bit MLL chip from Micrel Inc.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This shrinks the resulting binary size by ~25%. Exceptions
are still handled in arm mode, so we have to explicitely
put .arm directives into the exception code. Thumb-2 mode
has been tested on i.MX51 Babbage board.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
execute_command is the single point where commands are executed and thus a new
getopt context is needed. currently we call getopt_reset here to reset the
context. This breaks though when a command tries to run a command itself by
calling execute_command or run_command. In this case we have to store the
context and restore it afterwards. The same is necessary in builtin_getopt.
Currently noone does this so this one shouldn't fix a bug, but merely allows
us to do such things later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
By putting the fs devices/drivers on a bus on its own we can hook
into the bus remove function to cleanup the fs device. This way
we can unmount a device by simply unregistering the device which
is useful for for example USB mass storage devices. These can now
unregister the assoiated filesystems by unregistering their child
devices.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We store the fs devices in a list only because we want to
check if the fs driver needs a backingstore or not. The
driver will bail out anyway if it needs a backingstore and
doesn't find one. So we can remove this check and thus remove
the list of fs devices.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To make the code a bit easier to read. Also, do not allow
to umount / when something else is mounted.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add variables to control the duty_ns and period_ns of PWM
chips. When these variables are set, a call to either
pwm_enable() or pwm_config() is performed to enforce the
setup values.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds framework support for PWM (pulse width modulation)
devices.
A new pwm can be registered from a hardware driver using
pwmchip_add(). It can then be requested from a client driver using
pwm_request(). A string is used as a unique identifier for the
pwms. It should usually be initialized by the hardware drivers
using dev_name(dev). The client API is the same as currently
in the Linux Kernel.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The current caching layer only has a single buffer for
writing and reading. The FAT driver often accesses the
fat and then data again, which currently can't be cached.
Reimplement this with a list of cached chunks. The number
of chunks and their sizes are currently hardcoded, but
that could be easily made configurable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently we test the cards capabilities for being 8bit capable.
This does not work since noone ever sets this bit. Unfortunately
there is no bit to test 8bit capability, so we introduce a patch
from the kernel which puts the mmc card into 8bit mode and tests
whether it can succesfully read the ext_csd in this mode.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The mci layer currently passes around a struct device_d for
its internal use. Apart from being confusing this drops
typesafety for no good reason. Instead, pass around a struct
mci.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As we'll need more arguments to set_ios over time put them
in a struct mci_ios like the kernel does.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
At least ARM allows us to dump the stack, but we currently
have no prototype for this. Add a dump_stack prototype and
provide a static inline function for architectures without
stack dump support. Also, call dump_stack() in panic() to
provide more information in the case of a panic.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
kfifo currently only works with dynamically allocated fifos.
Change the currently unused kfifo_init to take a preallocated
fifo. This allows for statically initialized fifos.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently, we can only print the phy_status. Factor out the routine to
get the status, so we can query it from fec drivers and configure
accordingly. Needed because mx28 needs a special bit set for 10Mbit.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this allow to check we do not exceed the size of the SRAM as example
introduce BAREBOX_MAX_BARE_INIT_SIZE the maximum size of bare_init
this will allow your bare_init will fit in SRAM as example
ARCH can overwrite it via ARCH_BAREBOX_MAX_BARE_INIT_SIZE
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- add a usbserial command to enable/disable the serial gadget
- allow dfu and usbserial to cohexist in the same barebox
- add a timeout in u_serial so that we don't get locked if the user
enable usbserial from a UART console but doesn't consume the data
on the usbserial port created on the PC
- remove debug or verbose printf
- tested on i.MX25 & i.MX35 & usb-a926x
Signed-off-by: Eric Bénard <eric@eukrea.com>
Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add bit reversing utility, taken from the linux kernel.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As flash memories need BCH correcting codes, add the BCH
library, taken from the linux kernel.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
TLSF: Two Level Segregated Fit memory allocator implementation.
Written by Matthew Conte (matt@baisoku.org).
Public Domain, no restrictions.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Split /dev/mtd and /dev/mtdoob devices.
Remove from mtd structure the mtdoob character device.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Change NAND_WRITE into MTD_WRITE.
Change "page_shift" references in the core, which are purely
NAND, into mtd->writesize which is MTD generic.
Rename all "info" (struct mtd_info) into "mtd".
Also provide a parameter to add_mtd_device() so that legacy
nand devices still appear as nand<N>.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add a general twl device driver twlcore to call i2c send/write
functions.
Abstract twl4030 to call twlcore functions.
Fixed some code-styling issues pointed out by checkpatch.
Signed-off-by: Alexander Aring <a.aring@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add sorted insert in stringlist functions.
Also added function to checked if string is already
in string list.
Signed-off-by: Alexander Aring <a.aring@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
