As the place for the atags now is determined automatically the call
from the boards can be removed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
am33xx_register_ethaddr must be called before cpsw driver start.
Move it from devices_initcall to coredevice_initcall.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Using here now the initialisiation functions in
am33xx_generic.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
omap_save_bootinfo derefences the argument passed to barebox without
checking it for validity. This breaks 2nd stage booting where r0
is undefined. The best we can do is to check whether the pointer is
somewhere in SRAM and is word aligned. This at least makes sure that
we do not oops. This introduces SoC specific xxx_save_bootinfo variants
since the SRAM addresses/sizes differ between SoCs.
Additionally fix the prototype for omap_save_bootinfo. It uses r0, so
it must be passed this variable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The oscillator frequency varies on different AM33xx boards.
Pass the osc frequency from lowlevel board code
to set the correct one on every board.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Reviewed-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With multiboard support the compiletime generated BOARDINFO string
gets more and more meaningless. This removes it from Kconfig and
replaces it with a variable that can be set at boardlevel.
Also many boards have a standard setting for the hostname in the
environment. This patch also moves the standard to C code by calling
barebox_set_hostname().
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The ROM loader passes the address of a buffer to the MLO in
register 0. Store this data so we can find the boot source later.
On the same way the bootinformation are passed to the barebox,
then. It has to be enshured that r0 contains always the
buffer or the boot source detection will not work.
Applied this on all OMAPs. This patch is based on work of
Jan Luebbe <jlu@pengutronix.de>.
Compile tested on all OMAP boards.
Tested on pcm049, phyCARD-A-L1 and pcm051.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Tested-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Make loading environment from MMC generic for all OMAP.
Tested on AM335x, OMAP4.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Tested-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The bootsource functions are not specific to the first stage
bootloader. They may also be used for detecting the
bootsource to decide where to load the environment from.
Also clean up includes in board files.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The muxing in the am33xx_mux.c file is not generic as the muxing
setup does not fit for every board. Move the structs and functions
to the mach/am33xx-mux.h so board dependend mux setups can be
created.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
reset is confusing with the cpu reset and impossible to grep
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
All boards use hardcoded SDRAM addresses, copied from the board init file.
OMAP3 boards are a bit special, they had a SoC specific reset() function. This
is renamed to omap3_invalidate_dcache() and called from the board lowlevel init
code now.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
environment.h is for environment variables, not for the environment
storage (envfs), so move the prototypes to envfs.h
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Jan Weitzel
Jan Luebbe
Teresa Gámez
Alexander Shiyan
Jean-Christophe PLAGNIOL-VILLARD
Antony Pavlov