The mx31moboard is used on the marXbot, Eyebot and Footbot robot.
Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch gates the clocks to GPU, IPU, and VPU units by default,
significantly reducing the VDDSOC power draw while barebox is running.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Most devices relevant for barebox like sd/emmc/network/uarts
work. Devicetree contains several undefined drive strength settings,
these can be fixed once the kernel has sorted this out.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Adding minimal support for the UDOO board.
For more information about the board: http://www.udoo.org/
Signed-off-by: Raphael Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- Make sure the LCDC ipg clock is turned off during startup
- register all LCDC clocks (ahb, ipg, per) and pass them to driver
This is necessary because the LCDC doesn't have an enable bit. It just
starts working once the clocks are turned on. If the registers have
invalid values at that time the controller goes into some error state.
So we have to make sure the clocks are turned off during startup and
only turned on in the driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some boards need gpio functions very early and also sometimes
is useful to toggle gpios during early code debug. This adds a header
file for setting i.MX gpios early.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Which bootmode is selected has no longer to be chosen by Kconfig. The
boards can decide themselves which bootmode they want to support. This
makes it unnecesary to ask the user which bootmode shall be supported,
so the "Select boot mode" becomes invisible and both support will be
compiled in as needed by the boards. NAND_IMX_BOOT goes away and the
already existing ARCH_IMX_EXTERNAL_BOOT_NAND can now be used for the
boards to depend on external nand boot.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Only one GPT will be used, but with devicetree support we can't predict
which one it is, so we need the clock lookup for all GPTs to ensure
that the timer gets its clock.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If we are running from NFC SRAM and we are passed boarddata
containing a devicetree pointer then it point to an address relative
to the NFC SRAM start. First thing we do is to copy the initial
binary to SDRAM and jump there. The devicetree pointer has to be
adjusted by this offset.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When compiling with multiimage support ld_var(_barebox_image_size) only
contains the length of the PBL image, but not including the appended
compressed data. With this patch the image size is read from the barebox
header instead which contains the correct size, either from the linker
or from the fix_size tool.
This makes the external_nand_boot compatible with multiimage support.
Tested on Phytec phyCARD-i.MX27 with and without PBL.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With multiple instances we returned -EBUSY which will provoke a
log message. Return successful instead since the i.MX27 has multiple
GPTs in the devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With multiboard support the cpu_is_* macros are no longer compile time
generated and do not work in early code, so pass a v1 variable around.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We used to copy the initial binary portion from NFC SRAM to TEXT_BASE
and jumped there. With relocatable PBL TEXT_BASE becomes 0, so this
doesn't work. This is changed to copy the initial binary portion
to the beginning of SDRAM instead.
Tested on Phytec phyCARD-i.MX27 and Karo TX25 with and without
relocatable pbl.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The MPLL can be driven from the low frequency reference clock. This
is the reset default. Currently the clock code assumes this has been
changed from the lowlevel code. If that didn't happen we get wrong
clock rates. This adds the missing clocks so that we get correct
clock rates.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Solidrun has renamed the Carrier-1 to Hummingboard.
This is also the name that is used in upstream Linux,
change barebox to be in line with that.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Only the 1GB variant is supported for now, as I don't
have anything other to test with.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
having DSR support in mci-core we need a way to
forward the DSR value to the driver. Add it to
platform data for imx-esdhc
TODO: implement the same for other host controller
drivers
Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Using the ANATOP_SI_REV register we can only distinguish between
i.MX6q/d and i.MX6dl/s SoCs. Take the number of cores into account
to get the exact SoC type.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The IPU has a fractional pixelclock divider. When used, this produces
clock jitter which especially LVDS transceivers can't handle. Allow
to disable it via platform_data.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With the IPU the way the display is connected is completely independent
of the framebuffer pixel format. So instead of specifying a pixel width
in platform_data we have to specify how the display is connected.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Philippe Rétornaz
Philipp Zabel
Raphaël POGGI
Lucas Stach
Alexander Shiyan
Lucas Stach
Markus Niebel
Jesús Guitarte