drivers/of/base.c:70:20: warning: symbol 'root_node' was not declared. Should it be static?
drivers/of/base.c:72:20: warning: symbol 'of_aliases' was not declared. Should it be static?
drivers/of/base.c:1724:20: warning: symbol 'of_chosen' was not declared. Should it be static?
drivers/of/base.c:1725:12: warning: symbol 'of_model' was not declared. Should it be static?
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
drivers/i2c/i2c.c:246:19: warning: symbol 'i2c_new_device' was not declared. Should it be static?
drivers/i2c/i2c.c:274:6: warning: symbol 'of_i2c_register_devices' was not declared. Should it be static?
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
drivers/clk/clk-divider-table.c:81:16: warning: symbol 'clk_divider_table_ops' was not declared. Should it be static?
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
drivers/clk/clk-gate.c:79:16: warning: symbol 'clk_gate_ops' was not declared. Should it be static?
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
drivers/clk/clk-mux.c:53:16: warning: symbol 'clk_mux_ops' was not declared. Should it be static?
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
drivers/clk/clk-fixed-factor.c:38:16: warning: symbol 'clk_fixed_factor_ops' was not declared. Should it be static?
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
drivers/clk/clk-fixed.c:35:16: warning: symbol 'clk_fixed_ops' was not declared. Should it be static?
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently the version defines reflect the digits in the version
number. MMC_VERSION_4_41 is defined as 0x441 and MMC_VERSION_4_5
is defined as 0x405. This results in MMC_VERSION_4_5 < MMC_VERSION_4_41
becoming true which was surely not intended. Fix this by
redefining the versions as 0x<major><minor><micro>. This makes the
string generation more complicated but makes versions comparable
again.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Otherwise we loose memory on each device_unregister. The ethernet
code used to do this before calling unregister_device. This can
now be removed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
bus_list is only initialized when the device has a bus, but it
needs to be initialized in unregister_device, so initialize the
list unconditionally.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of directly using the hardware devicet for PWMs register
a logical PWM device so that the user operates on pwmx devices rather
than pxa-pwmx.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When no udc is registered it is clearly an error when usb_gadget_poll
is called. Let the upper layers know that.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this allows SATA to work on i.MX53 QSB-R :
barebox@Freescale i.MX53 Quick Start-R Board:/ ata0.probe=1
imx-sata 10000000.sata: port 0: SATA link ok
imx-sata 10000000.sata: port 0: Spinning up device...
imx-sata 10000000.sata: port 0: ok.
ata0: registered /dev/ata0
before this fix the log was :
barebox@Freescale i.MX53 Quick Start-R Board:/ ata0.probe=1
imx-sata 10000000.sata: port 0: SATA link timeout
set parameter: Connection timed out
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a driver for the Ethernet ip found on Marvell Orion SoCs,
which is derived from Marvell Discovery System Controllers (MV643xx).
It is partially based on the corresponding u-boot driver.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Michael Grzeschik <mgr@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a driver for the mdio bus found on Marvell Orion SoCs as
part of the GBE device and Marvell Armada 370/XP as part of Neta
eth device. Both drivers can share this code, so make it available
independently.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Michael Grzeschik <mgr@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This imports the Marvell mbus driver from Linux. The mbus is the
main downstream bus found on all Marvell Orion SoCs. The driver
deals with re-configurable address windows which are currently
parsed from DT. Also enable the driver as default on all MVEBU
SoCs. While at it, also reorder drivers/bus/{Kconfig,Makefile}
alphabetically.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This implements a of_phy_device_connect to allow DT enabled drivers
to connect to a PHY device by using the PHY's DT node only. It
currently assumes that each PHY node is a child of the corresponding
mdio bus.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This reorders Kconfig and Makefile for drivers/net alphabetically.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
free() already checks the pointer to be non
NULL. No need to do it again.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
enum imx_spi_devtype is used as index into an array of controller types.
This makes the controller type handling unnecessarily complicated. Just
drop the enum and instead of an array use different statically initialized
structs and referene them by name.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This sets the id_table in the driver correctly so that the driver
can match to the various types of flashes, not only "m25p80".
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
i2c/spi devices in the devicetree often come with a "vendor,device"
comaptible string. These do not match in barebox, so add a
device_match_of_modalias function which does exactly that.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The "Misc devices" menu does not enable anything by itself, so make it a
regular menu rather than a menuconfig.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
default_environment_path only exists when CONFIG_ENV_HANDLING is enabled.
Boards would have to #ifdef this if they wanted to use
default_environment_path. Use accessor functions instead which can
be ifdeffed on a single place.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch updates the CLPS711X UART driver.
The update adds support for use with devicetree and
makes driver comatible with current driver from kernel.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch updates the CLPS711X GPIO driver.
The update adds support for use with devicetree and
optimizes "probe" a bit.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
No reason to make SYSCON driver name unique to that processor.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The AX88772B uses only 11 bits of the header for the actual size. The other bits
are used for something else. This causes dmesg full of messages:
asix_rx_fixup() Bad Header Length
This patch trims the check to only 11 bits. I believe on older chips, the
remaining 5 top bits are unused.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Linux specifies the linux,stdout-path property in the /chosen node
in the devicetree. Unfortunately this is ignored in most cases.
For cases in which barebox uses this property for its own use we
translate this into a Linux boot arg with:
- the console name provided by the serial driver
- the the instance from the 'serial' alias
- the baudrate from the actual baudrate.
So with this it's for devicetee enabled boards no longer necessary
to manually assign a console= parameter. Should a user not want
to use the automatically assigned parameter it should do:
global.linux.bootargs.console=
in the environment.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
having DSR support in mci-core we need a way to
forward the DSR value to the driver. Add it to
platform data for imx-esdhc
TODO: implement the same for other host controller
drivers
Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
add optional DSR support. This should go into the kernel, too
Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The eMMC and the SD-Card specifications describe the optional SET_DSR command.
During measurements at our lab we found that some cards implementing this feature
having really strong driver strengts per default. This can lead to voltage peaks
above the specification of the host on signal edges for data sent from a card to
the host.
Since availability of a given card type may be shorter than the time a certain
hardware will be produced it is useful to have support for this command (Alternative
would be changing termination resistors and adapting the driver strength of the
host to the used card.)
Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Year is coded in 4 bits of CID. eMMC 4.41
adds a new interpretation rule: production
year for 4.41 cards and newer is between 2010
and 2025 with 0 corresponding to 2013.
This fix was inspired by currect kernel code.
Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
eMMC is available up to version 4.5 but the
correct version is not decoded. Change version
definitions to support more minor verions, add
missing versions and parse the minor versions from
ext_csd.
After this, card detection code and devinfo reports
correct versions.
Handling is inspired by u-boot code.
Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Let of_find_node_by_path_or_alias also find a node starting with an alias
followed by a path like "i2c0/tps@24"
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If an error occured during gpio_request_array() then we can
get not requested gpio with nonempty garbage "label" field
value. Afterward the "gpiolib" command can try to use this
nonempty garbage value.
This patch prevents this error situation.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Just copy gpiod_request() function logic from linux-v3.13-rc7.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
"dev" may uninitialized or points to incorrect device. While at
it make the message more informative.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On the pcm038 the ULPI phy is found correctly, but after
a power cycle the attached devices are not found. Adding
some delay fixes this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The ULPI code does not print a message when the operation times
out. Add one to the caller so that he gets an idea that something
is going wrong.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
imx_chipidea_port_init() will be called during startup from
the ehci driver. Calling it before setting up the PORTSC register
is only necessary in HSIC mode.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add more paranioa asserts to make it easier to detect
implementation errors.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On error we have to free all three temporary lists.
Reported-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The test:
if (!a && b)
a = b;
can be symplified in:
if (!a)
a = b;
And there's no need to test if ubi->image_seq is not null, because if it is,
it is set to image_seq.
So, we just test if image_seq is not null.
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some old UBI implementations (e.g. U-Boot) have not implemented the image
sequence feature.
So, when erase blocks are written, the image sequence in the ec header
is lost (set to zero).
UBI scan_all() takes this case into account (commits
32bc4820287a1a03982979515949e8ea56eac641 and
2eadaad67b2b6bd132eda105128d2d466298b8e3)
But fastmap scan functions (ubi_scan_fastmap() and scan_pool()) didn't.
This patch fixes the issue.
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If we find an invalid fastmap we have to scan from the very beginning.
Otherwise we leak the first 64 PEBs.
Reported-and-tested-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We have to set "ret", not "err" in case of an error.
Reported-and-tested-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If no free PEBs are available refill_wl_user_pool() must not
return with -ENOSPC immediately.
It has to block till produce_free_peb() produced a free PEB.
Reported-and-Tested-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Onging tests uncovered that invalidate_fastmap() is broken.
It must not call ubi_wl_put_fm_peb() because all PEBs used
by the old fastmap have already been put back.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
get_peb_for_wl() removes the PEB from the free list.
If the WL subsystem detects that no wear leveling is needed
it cancels the operation and drops the gained PEB.
In this case we have to put the PEB back into the free list.
This issue was introduced with commit ed4b7021c
(UBI: remove PEB from free tree in get_peb_for_wl()).
Cc: <stable@vger.kernel.org> # 3.7.x
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
miitool without arguments will try to show status for all phys.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
ubiformat needs the subpagesize to work correctly. The kernel uses
sysfs to pass the subpagesize, but in barebox we have the possibility
to extend struct mtd_info_user. Add a corresponding field and use it
in ubiformat.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
mtd->read returns the number of bitflips as positive numbers.
Instead of returning these numbers Return -EUCLEAN when the bitflip
threshold has been reached, 0 otherwise.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
mtd->read returns the number of bitflips as positive numbers.
Instead of returning these numbers Return -EUCLEAN when the bitflip
threshold has been reached, 0 otherwise.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
barebox does not need the screen size directly, but we pass the
framebuffer to Linux via simnplefb it is desirable to pass the
full size of the framebuffer. Default to calculated values from
the screen resolution.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The IPU has a fractional pixelclock divider. When used, this produces
clock jitter which especially LVDS transceivers can't handle. Allow
to disable it via platform_data.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When requested 32bit formats the IPU generated a 24bit format instead.
Implement real 32bit format (xxrrggbb) and let the IPU generate a 24bit format
when requested.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
No need to hardcode the channel parameters for the rgb offsets,
we can calculate them from the fb_bitfields. ipu_ch_param_write_field()
is the same as is the mainline IPUv3 driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
bitfields are not portable and one should make assumptions of the
layout of bitfields. Replace them with the ipu_ch_param_write_field()
which is already used in the mainline IPUv3 driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The dm9000 needs a resource for an index register and one for
the data register. Both should have a size of the access width,
and not two times the access width. The current code is probably
a leftover when the dm9000 had only one resource.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With the IPU the way the display is connected is completely independent
of the framebuffer pixel format. So instead of specifying a pixel width
in platform_data we have to specify how the display is connected.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch introduces a driver for the OpenCores 10/100 Mbps ethernet
MAC core, ported from Linux kernel with small changes.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Prober slave_num is needed by cpsw_gmii_sel_am335x to calc reg value.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is needed when a phy gets registered outsize of phy_device_connect
but has to be attached to an ethernet device later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With this phy_device_connect only registers a phy device if it wasn't
registered already. This allows us to register phy devices outside
of ethernet drivers. phy_device_connect will now pick up an already
registered phy given that it's not attached to another ethernet device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If during a phy_device_connect a phy already has an ehternet device
this can only mean it's already attached to another device. return -EBUSY
in this case.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If an ethernet device already has a phy in phy_device_connect all we
have to do is to start autonegotiation. Do this early and bail out
so that for the rest of the code it's clear that we have to search for
a phy device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
phy_register_device() currently requires an attached ethernet device.
This is not needed, a phy device can equally well be registered as
a standalone device without an ethernet device. Remove the need
for an attached ethernet device in phy_register_device. Also, make
the edev <-> phy connection on a registered device which simplifies
the code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Confirmed working on Tegra 2, may need some small adjustments for
Tegra 3.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We run the system bus from the OSC clock during init, to avoid crashing
the system while reconfiguring the PLLs.
Switch to a more reasonable clock when we are done with this.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some GPIOs are optional, so it might not be an error if we can not find
a DT property. Do the same thing as the Linux kernel and only print a
debug message not an error.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Do not call mtd_ioctl for mtdraw devices. mtd_ioctl will derefence
the priv pointer to a struct mtd_info whereas with mtdraw devices it will be
a struct mtdraw pointer. We do not need ioctls for mtdraw devices, so drop
it instead of fixing it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The mmci implementation uses some specific arm amba functions, so add a
depends on ARM_AMBA.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a devicetree-only driver for to configure the gpmc and its
child devices from dt. Currently only NAND is supported.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We currently have functions to add a device based on function parameters.
This adds the corresponding functions to add resources to a device without
registering the device itself. This is useful to manipulate devices before
registering them.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds devicetree probe support for the OMAP gpio ports and
also makes sure the corresponding platform_devices don't get
registered when they are already present from devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We currently only use one slave, so drop for_each_slave and hardcode
slave[0] until we pass the proper context to the functions that makes
this hack unnecessary.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of requiring a device pointer, add a functions to select
the pinctrl state based on a device node.
The AM33xx cpsw devicetree description has several subdevices with
pinctrl information attached to them. In barebox we do not handle
the subdevices as distinct devices, so the pinctrl is never configured
correctly and the mdio bus subdevice stops working. This patch makes
it possible to configure the pinctrl without having a device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A function should either return an ERR_PTR or NULL on failure, but not both.
Let get_phy_device() return an ERR_PTR and fix the return checks in mdiobus_scan
and phy_device_connect.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Devicetree probed cpsw devices won't have platform_data, so inline
the fields from slave_data instead of keeping a pointer.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The omap3 and omap4/am33xx spi cores differ in the offset of the
registers in the address space. Instead of encoding this into the
resources use the platform_device_id mechanism. This is done in
preparation for devicetree probe support where the address space
is in the devicetree and can't be adjusted.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Also import related functions gpio_request_one() and
gpio_free_array().
This commit imports code from linux 3.7 as
the more recent linux kernel versions use gpiolib descriptors,
see this commit for details:
commit 372e722ea4dd4ca11c3d04845e11cbc15f32144c
Author: Alexandre Courbot <acourbot@nvidia.com>
Date: Sun Feb 3 01:29:29 2013 +0900
gpiolib: use descriptors internally
Make sure gpiolib works internally with descriptors and (chip, offset)
pairs instead of using the global integer namespace. This prepares the
ground for the removal of the global gpio_desc[] array and the
introduction of the descriptor-based GPIO API.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
See linux.git/include/linux/gpio.h and
linux.git/Documentation/gpio.txt for details.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We need #include "mmci.h" only and not #include <mmci.h>
which don't exists.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The current implementation of the bootloader specification depends on the
hardware name and the name of the device in /dev to match. As the default
hardware name is mciX and the device name is diskY the bootloader spec
cannot be used as is.
This patch implements a way to overwrite the device name similar to what is
possible for the imx-esdhc driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a DT init function to clk-fixed and corresponding CLK_OF_DECLARE
to put it into the DT clock provider table.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a call to of_clk_init right after platform devices have been
populated.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This add barebox versions of of_clk_init for parsing and registering
clock providers from DT. Also, a macro CLK_OF_DECLARE is added, that
allows to put init callbacks into its own section that can be linked
in the binary.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a callback function to read the current state of a GPIOs
in/out direction.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds some more printf information to gpiolib command, like the
gpiochip handling a specific gpio. Also, current direction and value
of the gpio are printed, if the gpiochip provides the corresponding
callbacks.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This disables LEDs that have a trigger function assigned right before
the trigger is installed. As the trigger was parsed before the LED has
been registered, also swap LED registration and trigger parsing.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
"%d" in format string requires a signed integer.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
No functional change, just reorder the initialization of
the different offset/size members of fdt_header in increasing
order to make it easier to read.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A lot of files rely on include/driver.h including include/of.h (and
this including include/errno.h. include the files explicitly so we can
eventually get rid of including of.h from driver.h
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support to configure the active framebuffer for the kernel through
device tree.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Use the mailbox driver to set up a framebuffer based on the firmware
configuration.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support for framebuffers with noncontiguous horizontal lines.
Video drivers can set this value if the hardware requires it.
In case a driver does not set it, the current value of
xres * (bpp / 8) is used instead.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
i.MX5x OTG port is hardwired to the internal UTMI PHY, so having
this configurable makes no sense and helps using this port with DT.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When probing spi bus masters from devicetree they got a bus_num
of -1. This works with a single bus master only since all bus masters
had the same bus_num. Detect this and dynamically assign a valid
bus_num.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There is no much sense in having the pinctrl drivers be user selectable
as all arches using on of them already selects the right one.
So to avoid presenting the user with the choice to enable unrelated
pinctrl drivers or pushing lots of dependencies into the Kconfig just
drop the configurability.
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since the mainline kernel now has its own dr_mode and phy_type DT-options
for setting modes of USB ports, do these kernel parameters compatible by
removing "barebox" prefix.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Right now we do not support persistent names for mtd devices. The
base name can be passed to add_mtd_device, but this is always appended
with a dynamic number. With this patch add_mtd_device takes a device_id
argument which can be used to create a mtd device with an exact name.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The name of the raw device is mtdraw<num> which is inconsistent to other
mtd devices which are named mtd<num>.<partname>. Rename it to mtd<num>.raw.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
KSZ8031 is similar to KSZ8021. It can use the same functions.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some controller such as the ARM AMBA pl181 can not handle more than 16bits
data length request.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Switch from local mailbox code to using the newly created clock device.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
RPi's mailbox driver is used early and it needs clock functions to
handle timeouts.
Promote to a core_initcall().
Signed-off-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of populating an extra list containing all phandles just iterate
over the whole tree. This is done as preparation for more dynamic devicetrees
where parts are loaded at runtime. Here we don't want to keep the list of
phandles in sync.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Host with inoperable ULPI able to bring the system into an
infinite loop. The patch adds error checking during initialization
to avoid this.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
check the 4 mac address register and return at the first valid
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With commit c2ef47887 mci.f_max default value is
only set when pdata is available.
Fix this with always setting the mci.f_max default
value and overrite it when pdata available.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With this the verbosity of barebox can be controlled during runtime
using the 'loglevel' globalvar.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A printf in the driver should be dev_* and contain useful information.
Both is not the case, remove it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The driver didn't work well with at24 driver. NACKS are lost.
Errors are lost in isr due to the local variable err. Also we didn't wait for
bus free in omap_i2c_xfer_msg.
Fix issues and get other improvements from linux kernel
Tested on OMAP4 and AM335x
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Check for valid period size before calling ops->config. This fixes
the pxa driver which otherwise does a division by zero. While at
it, also check for duty_ns being smaller or equal to period_ns.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
The SoCFPGA currently has all clocks described in the devicetree which
makes common clock support a straight forward task.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
as today qemu does not support phy, it will return always 0x0 to any read
on the mii bus. So the phy_id is 0 and the link is donw.
To have the norwork running on versatilpb & other qenu board for the link up
at 100Mbps.
Only enable if qemu_fixup is set.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will be done at activation
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
None of the driver make the difference between STDOUT and STDERR.
So we just need to check if putc or getc are filled in the console_device
save 32 bytes on versatilepb
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can specify the devname in the board
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
At least i.MX53 has errata ENGcm12360:
Occurs when a pending command which issues busy is completed.
For a command with R1b response, the proper software sequence
is to poll the DLA for R1b commands to determine busy
state completion. The DLA polling is not working properly for
the ESDHC module. This is relevant for all eSDHC ports (eSDHC1-4 ports)
DLA bit in PRSSTAT register cannot be
polled to wait for busy state completion.
Updated block guide to reflect that DLA is not applicable to detect
busy state, instead, should poll bit 24 in PRSSTAT register (DLSL[0] bit)
to check that wait busy state is over.
Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
since the switch to common clock, ethernet driver doesn't works and
and access to the network leads to :
eth0: Read MDIO failed...
unable to handle NULL pointer dereference at address 0x000000c7
The problem is that bit 31 (SLEEP) of register HW_CLKCTRL_ENET is kept
to its default value (1) which means : "put Ethernet block in sleep mode.
CLK_H_MAC0(1), CLK_H_MAC0(1)_S, and CLK_ENET0(1)_TX are gated off.
Ethernet can be wakeup remotely in sleep mode"
In that case the FEC don't get its clock.
This patch fix the problem by toggling this bit when FEC's clock is
enabled.
Tested on i.MX28EVK.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
the check is wrong as when the clock rate is correctly set
the function will return 0.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
when the bootmode is different than NAND (USB for example), the
GPMI clock is not enabled thus we can't probe a NAND flash.
Tested on an i.MX28
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
since the switch to common clock, SPI driver reports :
MXS: Timeout resetting block via register 0x80014000
mxs_spi mxs_spi2: MXS SPI: Timeout waiting for start
The reason is that the clock is not enabled anywhere in
the driver.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this fix :
drivers/serial/serial_auart.c:49:22: fatal error: mach/mxs.h: No such file or directory
and
drivers/serial/serial_auart.c: In function 'auart_serial_init_port':
drivers/serial/serial_auart.c:174:2: warning: implicit declaration of function 'stmp_reset_block' [-Wimplicit-function-declaration]
only compile tested ATM
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this fix :
drivers/spi/mxs_spi.c:29:22: fatal error: mach/mxs.h: No such file or directory
and
drivers/spi/mxs_spi.c: In function 'mxs_spi_setup':
drivers/spi/mxs_spi.c:102:2: error: too few arguments to function 'stmp_reset_block'
include/stmp-device.h:21:12: note: declared here
only compile tested ATM
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of hardcoding the alternate/enhanced descriptor layout make
it configurable during runtime. This is based on the value of the
enh_desc variable which is currently hardcoded to zero. This should
be configurable via device_id in the future. Since currently we have
no in tree user of this driver this currently doesn't hurt.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Import of_find_node_by_type from Linux drivers/of/base.c -
commit id d8dfad3.
This function retrieves a node pointer based on the "device_type"
property of the node.
This is used by device tree update functions in PPC support.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
commit f64ed12b accidentally swap fclk_rate from am33xx and omap3.
Revert this change.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add function for indirect access of the mmd registers, based on linux.
phy_read_mmd_indirect
phy_write_mmd_indirect
Also clean some private mmd functions
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The driver is already capable of 8 bit buswidth support, so advertise
it to actually make use of it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
According to the SD Host Controller Specification Version 3.00, the ADMA error
status bit is on the wrong bit. Fix this.
While at it, add the missing standard error status bits.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds of_clk_providers for core clocks and clock gates found on
Marvell MVEBU SoCs (Armada 370, Armada XP, Dove, and Kirkwood).
It is based on Linux clock providers with clock flags removed, as they
are not used on Barebox.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of calling of_get_model() in barebox_get_model() add a
barebox_set_model() and use it to set the boardinfo once it's
available from the devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Otherwise only the internal DT is modified, not necessarily the one passed
to the kernel.
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
of_get_tree_max_phandle - get the maximum phandle of a tree. Needed for
creating new phandles without conflicts.
of_node_create_phandle - create a phandle for a node which doesn't have one.
of_find_node_by_alias - find a node by alias name
of_find_node_by_path_or_alias - find a node by full path or alias name
of_find_root_node - find the root node for a given device node
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In merge mode a property may be overwritte with new values. When
this happens the length has to be adjusted.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There is no reason to print used region each time.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch provides a global cleanup barebox Kconfig files. This includes
replacing spaces to tabs, formatting in accordance format.
No functional changes.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
print_hex_dump is a standard kernel function, so move it outside
the ubi header files to make it usable for other code derived from
the kernel aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We do not have ubi_do_get_volume_info and ubi_do_get_device_info
and do not need them yet, so remove calls to these functions to fix
compilation.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>