The current iocsr-config-cyclone5.c is actually board specific, although the
file name suggests otherwise.
As the file was generated for the SoCkit, move it there and add a new one
for the socrates.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Distil common code pattern for Phytec entry functions into a macro and
use it instead. This way a new board derivateve that differs only in device
tree file can be added with just one line.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Distil different startup functions into a generic one, different
behavioral aspects of which can be influenced by its parameters.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds support for the Freescale i.MX6sx sabresdb board.
Tested are:
- UART
- The three SD card slots
- USB host
- USB otg (host and device mode)
- FEC (both)
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Avoids a build failure if the config does not include ULPI support.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support for phyBOARD-SUBRA which use a phyFLEX-i.MX6 (pfla02) module.
- i.MX6 SOLO with 512MB RAM
Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support for phyBOARD-ALCOR which use a phyFLEX-i.MX6 (pfla02) module.
- i.MX6 Quad with 1GB RAM on two banks
Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The ethernet timings are set by the devicetree. They are no longer required in the
board file.
Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The compatible changed when we switched to the upstream
DTs, so the initcalls would not be executed on the START-R
board.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is similar to what we do on imx6 and makes sure we
apply the errata workarounds early.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This moves the variable assignments previously done in /env/config-board
to non volatile variables in /env/nv/. This makes the settings adjustable
by the user without editing a file.
Most of the changes are simple conversions which for many boards makes
/env/config-board unnecessary. Some boards had some logic to assign
global.boot.default based on the current bootsource. This has been
moved to /env/init/bootsource. An additional check is added to not
overwrite a nv.boot.default should it exist.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Use a mlo device tree with all bootable devices disabled.
The bootsource is checked in the board file and only the
needed device is enabled and registered.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
i.MX233 in OLinuXino uses LAN9512 for Ethernet connection.
LAN9512 is connected to USB. Execute usb command before bringing
network up.
This patch makes 'ifup eth0' workable.
Signed-off-by: Dmitry Voytik <voytikd@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Update nand bootargs for phyFLEX-AM335x and phyCORE-AM335x
to support modern kernels.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The sama5d4 xplained ultra board support following features:
- NAND flash support
- SPI flash support
- MMC card support (MCI1)
- LCD display support (with QT1070)
- Ethernet support
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Boards like phyBOARD-WEGA RDK have an phyCORE-AM335x
connected with no SPI NOR flash. Added dts to support this.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To support different module variants, split the phyCORE dts
in dts and dtsi. Configurable parts which are supported by
barebox are spi nor flash and i2c eeprom.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- Set default bootsource to the $boosource variable
- Pass ip to kernel on all boot options
- mount rootfs rw
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The clock driver will ungate all clocks anyway during startup, so
manipulating them in the DCD has no effect.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The nitrogen6x have variants with 2GB SDRAM. Add support for them. The
imxcfg files are from U-Boot.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The i.MX6DL only supports up to 800MHz RAM timing, so add the corresponding
file from U-Boot and use it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
i2c is needed to enable voltage rails that are later
needed by other drivers.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Additionally to the MLO update handlers also register the update
handlers for the regular barebox image.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add Atmel sama5d4ek board support, which include following features:
- NAND flash support
- SPI flash support
- MMC card support (MCI1)
- LCD display support (with QT1070)
- Ethernet support
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since 93a6c6a808("dts: update to v3.17-rc2") we have a correct gpio
configuration. This results in a double gpio request what receipted in a
error message like this one:
gpiolib: _gpio_request: gpio-25 (phy-reset) status -16
Now with this patch the problem is gone.
Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Karo TX6X family consists of different i.MX6Q/DL based System-on-Modules.
Add support for the TX6u 801x modules, that have an i.MX6DL SoC.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For now only the Quad 1GB variant is supported.
Tested:
- starting barebox over USB
- writing barebox to NAND with barebox_update
- starting Linux kernel over TFTP
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Remove mmd_write_reg function from board file and use phy_write_mmd_indirect.
Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Increased the RAM frequency to 400MHz.
Recalculation of the RAM timing values was needed.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
By retrieving the ecc_mode from pdata we can use the same code for device tree and
non device tree probing. Which was not possible before, because ecc_mode was arbitrarily set to
NAND_ECC_SOFT.
Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
By adding this structure member, we can retrieve the pmecc config, through the device tree.
Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This fixes various stability issues seen on new boards
with the old setup.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit adds a new Marvell Kirkwood-based board, by following the currently
supported boards.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It's often useful to get some information about a barebox image
before starting or flashing it. This patch introduces barebox
Image MetaData (IMD). When enabled a barebox image will contain
a list of tags containing the desired information. We have tags
for:
- the barebox release (2014.07.0-00160-g035de50-dirty)
- the build timestamp (#741 Mon Jul 28 15:08:54 CEST 2014)
- the board model the image is intended for
- the device tree toplevel compatible property
Also there is an additional generic key-value store which stores
parameters for which no dedicated tag exists. In this patch it
is used for the memory size an image supports.
Since there is no fixed offset in a barebox image which can be
used for storing the information, the metadata is stored somewhere
in the image and found by iterating over the image. This works
for most image types, but obviously not for SoC images which are
encoded or encrypted in some way.
There is a 'imd' tool compiled from the same sources for barebox,
for the compile host and for the target, so the metadata information
is available whereever needed.
For device tree boards the model and of_compatible tags are automatically
generated.
Example output of the imd tool for a Phytec phyFLEX image:
build: #889 Wed Jul 30 16:08:54 CEST 2014
release: 2014.07.0-00167-g6b2070d-dirty
parameter: memsize=1024
of_compatible: phytec,imx6x-pbab01 phytec,imx6dl-pfla02 fsl,imx6dl
model: Phytec phyFLEX-i.MX6 Duallite Carrier-Board
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We have our file helper functions in several places. Move them
all to lib/libfile.c.
With this we no longer have file helpers in fs/fs.c which contains
the core fs functions and no functions in lib/libbb.c which are
not from busybox.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The configuration for NAND has been aligned with values
from U-Boot and completed with TIMINGS initialization
Signed-off-by: Matteo Fortini <matteo.fortini@gmail.com>
[voice.shen@atmel.com: apply this patch from Matteo Fortini for
sama5d3xek to sama5d3_xplained board]
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds support for 256MB and 128MB RAM configurations of the
phyCORE-AM335x. This is done as new images.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- use am335x_barebox_entry() to remove the need for hardcoded SDRAM
size
- remove hardcoded memory settings from device tree since there are
different memory sizes available for this board.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The configuration for NAND has been aligned with values
from U-Boot and completed with TIMINGS initialization
Signed-off-by: Matteo Fortini <matteo.fortini@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Many boards use a USB vendor id of 0x4321. This doesn't exist and
shouldn't be used. Remove this and also the bogus product id of 0x1234.
The boards will use the barebox default vendor/product id then.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will add support for Embedsky E9 board.
It is a small board based on i.MX6 Quad with 2G of RAM.
http://en.embedsky.com/product_info.php?cateid=169&id=169
Signed-off-by: Andrey Panov <rockford@yandex.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
phyFLEX boards beginning with 1362.2 have a workaround for this
i.MX6 bug:
ERR006282 ROM code uses nonreset PFDs to generate clocks, which may
lead to random boot failures
On these boards the SD4_DAT3 pin os connected to the CMIC. The CMIC
will reset the board after 10s when the pin isn't toggled.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The rule in barebox is to name the directories after
the modules. As hummingboard is just one of the
carriers for the MicroSOM module, name the directory
accordingly.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of repeating the same lowlevel init for every board
move it to it's own initcall.
Avoids code bloat and shaves off almost 1.5kB of uncompressed
barebox size for a default imx_v7_defconfig build.
For boards wherethe hostname setup was done in the postcore
initcall we move this to a device initcall to get it out of
the way.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fix misspellings of "persistent", including the renaming of a function
to "register_persistant_environment".
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For some phyFLEX-i.MX6 modules the call __barebox_arm_head() was not removed.
With this function the barebox does not start.
Signed-off-by: Christian Hemp <christian.hemp@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The doxygen documentation is long outdated. Remove it. It will
be replaced with sphinx based documentation later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With all SoCs converted to DT based probing, select
PBL_MULTI_IMAGES support and get rid of SoCs Kconfig
choice to allow multiple boards to be selected.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
This converts Marvell Armada XP based PlatHome Openblocks AX3-4
to PBL_MULTI_IMAGES. A DT overlay is added to keep possible
barebox-specific changes separated and added to lowlevel
board init.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
This converts Marvell Armada XP based Marvell Armada XP GP
to PBL_MULTI_IMAGES. A DT overlay is added to keep possible
barebox-specific changes separated and added to lowlevel
board init.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
This converts Marvell Armada 370 based Globalscale Mirabox
to PBL_MULTI_IMAGES. A DT overlay is added to keep possible
barebox-specific changes separated and added to lowlevel
board init.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
For i.MX devicetree boards the console= parameter is automatically
generated and can be dropped from the env files. If a file becomes
empty then, remove it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The bootargs are now autogenerated by barebox and the hostname should
not be preconfigured.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Commit 0d6392de4a introduced a stripped
down device tree used for both white and black Beaglebone variants
that included the 256 MiB memory node from am335x-bone-common.dtsi.
This leads to the following error in the MLO:
mmu: Critical Error: Can't request SDRAM region for ttb at 9fff4000
This patch removes the (for the Beaglebone black) invalid memory size
from the common device tree and instead registers the memory bank
manually in the board file.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Register the board specific environment during runtime using
defaultenv_append_directory() to make it available for multi
image support.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch removes non-DT support for PCM-038/PCM-970 and switch
to devicetree probe for these targets.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The FSF address has changed; The FSF site says that
address is
Free Software Foundation
51 Franklin Street, Fifth Floor
Boston, MA 02110-1301
USA
(see http://www.fsf.org/about/contact/)
Instead of updating it each time the address changes,
just drop it completely treewide.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The beaglebone white and black have different devicetrees. Both
get linked into the MLO which makes it too big. Use a devicetree
generated from am335x-bone-common.dtsi which both board variants
can share. This reduces the binary size by about 30k.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It wasn't hard to find the right spot to copy the image
to before, but this makes it a bit more explicit.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The MB 77.07 is a small (80x80 mm) single-board computer
developed in Russia by the RC Module.
It was developed as an educational board for К1879ХБ1Я SoC
capabilities demonstration.
See http://www.module.ru/en/catalog/micro/micro_pc/ for details.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
I assume I am the only person knowing that barebox is able to
merge devicetrees. This feature seems broken for a while now since
trying to merge devicetress results in:
unflatten: too many end nodes
Remove this feature to save the complexity.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This makes sure the PMIC is initialized once it's available. Move the
initcall to coredevice_initcall to make sure we initialize the PMIC
before the FEC driver is initialized. The ethernet phy needs vgen3
enabled in the PMIC initialization.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Six images for the the 256MB and 512MB version with
different boot sources (MMC, NAND [different chips on
pre-/production modules]).
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
From https://github.com/NVIDIA/cbootimage-configs.git
There are a bunch of different versions and boot options
for this board. Import BCTs for all of them.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>