Add a general twl device driver twlcore to call i2c send/write
functions.
Abstract twl4030 to call twlcore functions.
Fixed some code-styling issues pointed out by checkpatch.
Signed-off-by: Alexander Aring <a.aring@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Added i2c support for omap4. Tested on pcm049.
Driver based on linux kernel implementation.
Also added a shift to access 16-bit registers
to make support for OMAP730/850 possible.
If accessing a non existing slave the bus will go into arbitration mode.
It's unable to recover from it.
Signed-off-by: Alexander Aring <a.aring@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Increase pxa reading performance by reading 4 bytes at a
time instead of 4 reads of 1 byte.
As the mci controller FIFO accepts reads on bytes, halfwords
or words, use words whenether possible.
The boost is for a 250KBytes file read and display (bmp):
- before: 6900ms
- after: 6000ms
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The write data timeout is too small for old cards,
especially the Transcend 256MBytes SD card. Increase it from
10ms to 100ms.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As PXA cpus suffer from a silicon bug which prevents them
from being compound devices, forbid use_acm=1 for PXAs.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The NAND_READ_OOB Kconfig option is used to
a) creating a cdev for reading OOB data
b) compiling in mtd->read_oob support
The former was intended and that's also what the Kconfig help
says. The latter though was implicit and wrong. mtd->read_oob
is also used by the bbt code which resulted in a NULL pointer
deref when compiled with BBT but without NAND_READ_OOB.
To fix this, split the option into two. The now invisible
option NAND_OOB_DEVICE is only responsible for b) and gets
selected when necessary.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Support for the old DM9000E device is now part of the new dm9k.c driver. So,
remove the old driver source and switch all users to the new driver.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds support for the more recent DM9000A and DM9000B types, and keeps
support for the older DM9000E device. As this patch is more or less a complete
re-wrote of the existing driver I add a new source file instead of fixing the
existing one. In a later patch the old driver will be removed.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add all available video modes to the framebuffer. devinfo fb0
shows the available modes. We can select a mode now.
Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add a simple PIO based host controller for MMC and SD cards
on PXA SoCs. Reads and writes are available, and no usage is
made of DMA or IRQs.
SPI mode is not supported yet.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We have to check which sd card slot we use. The registered mmc_id is the
the correct parameter for this.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is needed for the ohci-at91 to work.
In u-boot this function was transmitting a cmdlen of 12, by the initial
commit. There are similar functions like usb_request_sense,
usb_read_capacity nearby which also transmit 12 byte per default on
u-boot, which probably also need a fix.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
as example today if the timeout happened we can not probe the SD card again
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As USB can have its cable plugged out anytime, make the
serial gadget reliable in case of unplugging :
- unregister the gadget_serial provided console
- don't stay forever in the read loop if connection was cut
This behaviour relies on correct implementation of
usb_gadget_poll(), which should return an error if the USB
cable was removed.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The serial gadget can only work if the serial function is
properly connected on USB trigger (ie. on SET_CONFIGURATION
or SET_INTERFACE USB message triggering set_alt() in
composite.c).
Make this connection and handle also the disconnection in
f_serial.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Use the generic gadget polling function instead of the
specific fsl function. This is a fix from a leftover in
gadget development.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Adapt mainline kernel pxa27x_udc driver to barebox :
- remove function header comments as they are in mainline
- test it with serial gadget
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The core support was brought by Marc and Sascha.
The cache choice was fixed by Luotao Fu.
Some gpio and devices addons were provided by Robert.
Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- use KERN_ERR for messages when NAND-ID detection fails
- report the IDs also if not found
- print the errno if nand_scan failed
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We never had interrupt support in barebox and we have no plans to
add interrupt support. Even if we do I doubt the current fragments
of irq support are helpful, so remove them.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Without CRC support the mmc spi driver fails to compile with
the following:
drivers/mci/mci_spi.c:74:18: error: static declaration of 'crc7' follows non-static declaration
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This simple driver enables a generic driver for ATA type of devices to get
access to the so called 'register file' of an ATA drive.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This changed patch removes more of the u-boot like code and replace it with
kernel like code.
commit 2a8966936af6b54573483ade559d0633e489b515
Author: Juergen Beisert <jbe@pengutronix.de>
Date: Fri Sep 30 15:06:26 2011 +0200
ATA Disk Support: Add support for native ATA type drives
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Using the BIOS to access attached hard disks means a full disk driver, not only
an interface to the drives.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
'ATA' means more an interface than a disk drive. Change the names to reflect
their real meaning.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The BIOS based disk driver makes no sense without the generic disk support.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Enabling AUTOSYNC means enabling the auto sync feature, not rising the RTS
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Without this i.e. the m25p driver is not working properly.
Its used to calculate the return value of the read/write function of
some devices. If the value is missing, barebox would always
miscalculate the next transfer sizes.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Linux kernel says (spi.h) :
* All SPI transfers start with the relevant chipselect active. Normally
* it stays selected until after the last transfer in a message. Drivers
* can affect the chipselect signal using cs_change.
*
* (i) If the transfer isn't the last one in the message, this flag is
* used to make the chipselect briefly go inactive in the middle of the
* message. Toggling chipselect in this way may be needed to terminate
* a chip command, letting a single spi_message perform all of group of
* chip transactions together.
*
* (ii) When the transfer is the last one in the message, the chip may
* stay selected until the next transfer. On multi-device SPI busses
* with nothing blocking messages going to other devices, this is just
* a performance hint; starting a message to another device deselects
* this one. But in other cases, this can be used to ensure correctness.
* Some devices need protocol transactions to be built from a series of
* spi_message submissions, where the content of one message is
* determined by the results of previous messages and where the whole
* transaction
* ends when the chipselect goes intactive.
In other words, cs_change changes the default chipselect *behavior*.
Support of cs_change is necessary to implement the mci spi driver.
This patch also fix few things:
Passing the bus number to the brand new master device.
Disable chipselect during master->setup.
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds MMC over SPI support to mci-core.c and
mci_spi.c driver.
This driver is useful when SOC doesn't have built-in MCI
component. Tested with nios, 2Go SD-CARD and FAT file system.
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We used to loop around the sectors in mci_sd_write/mci_sd_read.
Now that we have multi block read and write this is not necessary
anymore.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add missing reference to dev when register the blockdevice.
This prevent the creation of a cdev with a NULL reference to dev in
blockdevice_register.
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The OMAP4 romcode expects some unusual ecc layout which we could
write but not read. This patch adds a function which uses the
manual mode to read a page written with this ecc layout.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We can't use the ECC_RESULTx_0 register set for manual mode which
we'll need in the next patch. So factor out an internal function
which makes the register set to use configurable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- add missing '\n' at line ends
- fix wrong argument type warnings
- remove too noisy debug in omap_hwcontrol
- add function names to debug printfs
- add 0x prefixes to hex values
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The driver used to print an error when bch decoing failed, but
did not actually throw an error. Fix this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Move omap_calculate_ecc outside omap_correct_bch. When implementing
the romcode bch read page we have to call omap_calculate_ecc with
different arguments than in the standard case.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We need the bch correct algorithm in the next patches, so
factor out a seperate function for this and also safe an
indention level.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Modified the i2c_imx driver to support data-only transfers, without
command byte. This allows to construct more complex i2c transfers
and support non genuine devices like Atmel ATxx secure memory, where the
master reads data after a write command.
Signed-off-by: Rosen Kolev <rosen.kolev@amk-drives.bg>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Documentation says it should default to 8 when not specified
explicitly by the device data.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Call setup() before registering the device because registering leads
to a probe routine of the slave device and that requires an
initialised master.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is broken on big endian systems since:
943b271 cfi_flash: support of u32 cmd
I looked over it and I *think* that the function was correct
for both big and little endian systems before this patch.
To support u32 cmd we only have to change the data type of
the command from u8 to u32.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Teresa Gámez <t.gamez@phytec.de>
Implemented an initial version of USB mass storage device driver,
supporting USB mass storage devices with SCSI interface and BBB
protocol. It implements the ATA interface and registers diskovered
LUNs with the disk driver.
To allow for some generic io accessors introduce io.h and use
this instead of asm/io.h throughout the tree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The nand controller on i.MX51/53 uses two base addresses. Instead
of hardcode the second address use the new shiny resources two specify
it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Based on the Linux driver. Tested with m25p80 with CS in GPIO mode.
Clock setting support is ad-hoc as the corresponding mach is not using
the generic clock infrastructure.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
and busnum start at 1
as this
Bus 001 Device 002: ID 0b95:7720 AX88772
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Commit 4c542622 used the wrong variable name and caused a build failure.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add platform data to specify maximum frequency of hsmmc interface
which can be restricted due to external level shifters.
Signed-off-by: Juergen Kilb <J.Kilb@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This code was tested barely with m25p80 driver, reading jedec id and some data
from the chip worked fine.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some NOR flash chips have commands with length greater than the maximum
value size of uchar.
Based on an U-Boot Patch by Vasiliy Leoenenko <vasiliy.leonenko@mail.ru>
Only tested with little endian on an intel cfi_flash.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds the m25p80 driver. It has been ported from
Linux. MTD code has been removed. It has been tested with
a m25p40 chip and the Altera SPI master driver.
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Files associated to a device showed up in a long list. Instead,
print them in seperate lines and also show offset/size information
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Otherwise, when a non active device is unregistered, we call
list_del on an unitialized list which oopses.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will also fix the clock support as we now switch to allocated generic
device
as we can need to associate the clock and the device but the driver is probe
before the association
we also change the atmel serial name to "atmel_usart" to simplify sharing with
linux
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
as now all the drivers and board have been switch to resource whe can drop
map_base and size from device_d
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
use generic read/write depending on the memory size
if no reg_read/write defined
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
pass the hccr and hcor register base via resource
instroduce add_generic_usb_echi_device with hccr = base + 0x100 and
hcor = base + 0x140
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
While at it, dynamically allocate private driver struct.
There might be only a single instance of this driver,
but don't be a bad example for others.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The driver uses a static int once variable to alloc the
rx packets. remove this to make the driver multi instance
safe. While at it, remove the crappy selfmade alignment.
dma_alloc_coherent returns sufficiently aligned memory.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In the Kernel this bug is described like this:
> The CMDTYPE of the CMD register (offset 0xE) should be set to
> "11" when the STOP CMD12 is issued on imx53 to abort one
> open ended multi-blk IO. Otherwise the TC INT wouldn't
> be generated.
> In exact block transfer, the controller doesn't complete the
> operations automatically as required at the end of the
> transfer and remains on hold if the abort command is not sent.
> As a result, the TC flag is not asserted and SW received timeout
> exeception. Bit1 of Vendor Spec registor is used to fix it.
We do not use exact block transfers in barebox, so we only need
the first part of this fix.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is the non invasive approach. All this type casting
shows this driver should be really cleaned up (or retired)
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If the device setup executed by the spi master fails,
unregister the created device.
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
During the creation of a new spi device, we need to
have the possiblility to give the bits_per_word value
to master->setup.
As a matter of fact, spi master could check the spi
device bits_per_word and compare this value against its
capabilities.
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When the bus_width was set to 8, then only one data-line has been initialized.
Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit adds support for most spi eeproms, such as the
Atmel at25 models.
Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit adds the following spi transfer functions:
- spi_write
- spi_read
- spi_write_then_read
- spi_w8r8
The code has been ported from the linux kernel.
Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In the spi layer this pointer will be assigned to the
platform_data pointer of the new spi device, thus it can
be accessed in the drivers 'probe' handler.
Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Now a 'devinfo gpmc_nand0' shows the current used eccmode
instead of <NULL>.
The function omap_gpmc_eccmode is now called by dev_set_param.
Signed-off-by: Juergen Kilb <J.Kilb@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The following patch came across the mtd mailing list today. I thinks its also
valid for barebox (it handles a special corner case, but maybe it can hit us,
too):
In nand_do_write_ops() code it is possible for a caller to provide
ops.oobbuf populated and ops.mode == MTD_OOB_AUTO, which currently
means that the chip->oob_poi buffer isn't initialised to all 0xFF.
The nand_fill_oob() method then carries out the task of copying
the provided OOB data to oob_poi, but with MTD_OOB_AUTO it skips
areas marked as unavailable by the layout struct, including the
bad block marker bytes.
An example of this causing issues is when the last OOB data read
was from the start of a bad block where the markers are not 0xFF,
and the caller wishes to write new OOB data at the beginning of
another block. In this scenario the caller would provide OOB data,
but nand_fill_oob() would skip the bad block marker bytes in
oob_poi before copying the OOB data provided by the caller.
This means that when the OOB data is written back to NAND,
the block is inadvertently marked as bad without the caller knowing.
This has been witnessed when using YAFFS2 where tags are stored
in the OOB.
This patch changes the code so that oob_poi is always initialised
to 0xFF to make sure no left over data is inadvertently written
back to OOB data.
The comment above is for the linux kernel, but the same is valid for barebox
and CPUs writing the OOB date controlled in software (like the Samsung
S3C2440 does).
Signed-off-by: Adam Thomson <adam.thomson@alcatel-lucent.com>
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Heavily based on original Juergen Beisert's code.
Signed-off-by: Alexey Galakhov <agalakhov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
NAND_BUSWIDTH_16 should result in dev_width = 1 according to the kernel driver
omap_enable_hwecc: dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0;
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The old way happily removed cdev entries which were no bb dev
at all. Fix this by checking if the given device actually is
a bb device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The cdev operations are available without the complete file API,
so they are more suitable for internal usage.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It's good to seperate the code which others can use from commands.
This way other users do not depend on the command being compiled in.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The information from the probe function is useful for developers
only, so turn them into dev_dbg to safe binary space.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The nand oob functions occupy quite some binary space. If not needed,
we can save this space by making this configurable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch makes the USB command optional and makes usb_rescan a
global function. This way we can use USB in noninteractive
environments.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
No need to check for the result and increases the chance that we
build a binary without the rarely used calloc function.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds Altera UART driver. Kconfig and Makefile are
updated to include this new driver.
Signed-off-by: Franck JULLIEN <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds BCH ecc support to the omap nand driver. The BCH
error correction allows for up to 8 bit error correction. It is
also needed for booting from nand on omap4.
This is based on code from Sukumar Ghorai <s-ghorai@ti.com>:
[PATCH] omap3: nand: bch ecc support added
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On omap we use different ecc modes for different purposes. The initial
boot code has to be written with hardware ecc whereas Linux usually uses
software ecc. To be able to write in both modes with a sinlge barebox
image introduce a eccmode device parameter.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Give this omap specific entry an omap namespace. Also, remove
unnecessary dependency to omap2/3 in nand Kconfig.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Most cards do not answer if some reserved bits
in the ocr are set. However, some controllers
can set bit 7 (reserved for low voltages), but
how to manage low voltages SD card is not yet
specified.
based on the original U-Boot patch from
Stefano Babic <sbabic@denx.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Do the same ECC handling and ECC size in barebox than the kernel does.
Currently its done for S3C2440 based systems only, as I have no idea how to
manage it on a S3C2410 based system.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When booting from NAND, its important to know the correct page size. When
the NAND is used as the boot source, four dedicated pins are used to configure
the correct page size and address cycles. These pins can be read back in one
of the NFC registers to parametrize the load function.
This patch also extends the read routine to support more than four address
cycles on demand.
BTW: At least some mini2440s are misconfigured to use five address cycles for
a NAND device that is known to need only four address cycles. In this case the
vendor is at our side: This NAND simply ignores any additional address cycles
than required.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Something was to be done here. But I do not remember what. As it works also
without it, remove this dead code.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
After running the 'nand_boot_test' command, any usage of the NAND fails with
a IO error. This happens due to the load routine disables the NAND controller
after loading the image.
This patch re-enables the NAND controller again after running the test.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Only the platform sets this entry to setup the correct size or
signals the driver to guess the size of the attached disk.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
It will be called by set_ios anyway later. Also, do not
alter host->clock field, this is none of our business.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This allows for more type safety. passing a struct device_d
internally in the driver is not a good idea. Also, this
patch adds a void __iomem *regs to mxs_mci_host. dev->map_base
should not be used for register accesses.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There is no need to fill the FIFOs before starting a transfer, so
remove corresponding code which is commented out anyway. Additionally
this fixes a compiler warning with gcc4.5
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Jürgen Beisert <jbe@pengutronix.de>
The i.MX Processors support two different boot modes, the internal
boot mode and the external boot mode. Traditionally the external
NAND boot mode is handled in drivers/mtd/nand and the internal
boot mode is handled in arch/arm/mach-imx. This patch consolidates
the handling of both boot modes in arch/arm/mach-imx so that
the user does not have to look in the mtd kconfig section for
booting from NAND. Also, selecting between internal and external
boot mode now is a clear choice.
The external NAND boot mode has been independent of the mtd nand
driver, but as the code was contained in the NAND driver it was
not possible to support booting from NAND without a mtd nand driver.
This is changed with this patch.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
as barebox can be run as a second stage the first stage may have init it
before so re-used it
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The S3C2440 provides 32 bit access to the NAND's data. Add specific read
routines to speed up data reading and writing.
These routines are stolen from the Linux kernel.
Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There are a few but important differences in S3C2410 and S3C2440. This patch
fixes them for the S3C2440 CPU.
Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The default configuration of the current 2.6.37 kernel uses a flash based BBT.
So, barebox must also use one, to be in sync with the kernel about bad blocks
in the flash.
Due to the used OOB layout, the generic BBT description coming with the
framework can be used.
Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Without this patch (against next) I get this:
rsc@thebe:barebox$ make ARCH=arm CROSS_COMPILE=<path>/arm-v5te-linux-gnueabi- menuconfig
HOSTCC scripts/kconfig/lxdialog/checklist.o
HOSTCC scripts/kconfig/lxdialog/inputbox.o
HOSTCC scripts/kconfig/lxdialog/menubox.o
HOSTCC scripts/kconfig/lxdialog/textbox.o
HOSTCC scripts/kconfig/lxdialog/util.o
HOSTCC scripts/kconfig/lxdialog/yesno.o
HOSTCC scripts/kconfig/mconf.o
HOSTLD scripts/kconfig/mconf
scripts/kconfig/mconf Kconfig
warning: (ARCH_IMX25 && ARCH_IMX27 && ARCH_IMX35 && ARCH_IMX51 && ARCH_IMX28) selects ARCH_HAS_FEC_IMX which has unmet direct dependencies (ARCH_IMX)
warning: (ARCH_IMX25 && ARCH_IMX27 && ARCH_IMX35 && ARCH_IMX51 && ARCH_IMX28) selects ARCH_HAS_FEC_IMX which has unmet direct dependencies (ARCH_IMX)
Add the option for the FEC on MX28 as well.
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Video controller of STM allow to control the reset bit of an external
LCD controller. When reset_lcd is set, CTRL1_RESET bit is used to
enable and disable LCD.
Handle USE_LCD_RESET as a flag in imx_fb_platformdata.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When describing an new video interface, it is now possible to select
the bit per pixel. If nothing is chosen 16bpp is selected by default.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We never supported the sigmatel stm chips and probably
never will. So do the first step and rename the architecture
to mxs just like in the kernel.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Ethernet PHY devices have 32 registers, each 16 bits wide. Thus, the size of
the phy device should be 64 bytes.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Also, set size to 0 when setting up the framebuffer failed so that
the user cannot write to uninitialized framebuffer memory.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Calling fb_activate_var potentially changes the framebuffer address,
so we have to update the fb0 cdev afterwards.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
strange behaviour was observed with actual driver : bus lock, probe of
absent adresses, wrong data read.
This patch sync the driver with linux's one and after a few tests, we
don't see anymore strange behaviour (tested on i.MX27).
Signed-off-by: Eric Bénard <eric@eukrea.com>
Acked-by: Marc Reilly <marc@cpdesign.com.au>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch fixes warnings due to incompatible format strings
specified in the printf().
Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The idea is to panic() when there is no memory available for normal
operation. Exception: code which can consume arbitrary amount of RAM
(example: files allocated in ramfs) must report error instead of panic().
This patch also fixes code which didn't check for NULL from malloc() etc.
Usage: malloc(), memalign() return NULL when out of RAM.
xmalloc(), xmemalign() always return non-NULL or panic().
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch fixes the compiler error:
CC drivers/usb/host/ehci-omap.o
drivers/usb/host/ehci-omap.c: In function 'ehci_omap_init':
drivers/usb/host/ehci-omap.c:204: error: 'CPU_ES2P1' undeclar
ed (first use in this function)
drivers/usb/host/ehci-omap.c:204: error: (Each undeclared ide
ntifier is reported only once
drivers/usb/host/ehci-omap.c:204: error: for each function it
appears in.)
make[3]: *** [drivers/usb/host/ehci-omap.o] Error 1
Problem reported by: Cory Walker (cwalker32@gmail.com)
Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch fixes warnings due to incompatible format strings
specified in the printf().
Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fix NOR CFI flash driver to work on big endian systems.
Basically this transforms the u8/u16/u32/u64 union into
a single u64 value.
Not tested on LE platform. Apply with caution.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch add the possibility to change the video mode at barebox's runtime
if the graphics driver in use supports it.
Signed-off-by: <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To setup the default 'enable' setting the "dev_set_param(dev, "enable", "0");"
does not work as expected. After the call the parameter is still "<NULL>".
This is due to any change of the setting is rejected, if the same setting
is already active.
This patch also let the default setting be successfull, but only calls the
graphics backend if a change happens.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The i.MX28 comes with an extended ethernet controller (ENET/FEC) which
is backwards compatible to the FEC known from other i.MX CPUs. Add a few
adaptions to the existing driver to make it work with the MX28 FEC.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some register bits are not defined in the IMX CPUs using this FEC (at least
I did not find anything about them in the related datasheets) and they will
get (partially) a new meaning in the i.MX28 CPU. So, removing them from the
source seems the best way to avoid any accidental usage on i.MX28.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Only the platform should configure pins to be used by the driver.
The driver must work independently from the settings.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
i.MX23 currently uses kHz as the unit for its clock handling and calculation
to avoid overflows when calculation with the internal 480 MHz PLL and its
fractional divider. This patch changes all routines to accept Hz and deliver
Hz as the clock unit.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Run fixups based on the JEDEC manufacturer ID independent of the
command set ID.
This changes current behaviour: Previously, geometry reversal for AMD
chips were done based on the command set ID, while they are now done
based on the JEDEC manufacturer and device ID.
Also add fixup for top-boot Atmel chips.
based on U-Boot
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Move fixing up like geometry reversal into separate functions.
The geometry reversal fixup is now performed
by altering the qry structure directly, which makes the sector init
code slightly cleaner.
based on U-Boot
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
The CFI flash driver starts at flash_init() which calls down into
flash_get_size(). This starts by calling flash_detect_cfi(). If said
function fails, flash_get_size() finishes by attempting to reset the
flash. Unfortunately, it does this with an info->portwidth set to 0x10
which filters down into flash_make_cmd() and that happily smashes the
stack by sticking info->portwidth bytes into a cfiword_t variable that
lives on the stack. On a 64bit system you probably won't notice, but
killing the last 8 bytes on a 32bit system usually leads to a corrupt
return address. Which is what happens on a Blackfin system.
based on U-Boot
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Read out the whole CFI Standard Query structure after successful cfi
identification. This allows subsequent code to access this information
directly without having to go through flash_read_uchar() and friends.
based on U-Boot
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use
them to access the flash memory. This makes it clearer when the flash
is actually being accessed; merely dereferencing a volatile pointer
looks just like any other kind of access.
based on U-Boot
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
several first banks can contain 0x7f instead of actual ID
support as done in linux
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
it will reduce the binary size of 28 bytes
and fix some issue observerd during the porting of the at91rm9200ek
when reading the device_id and manufacturor_id
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
now we need to set the dev id to -1
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Patch fix all similar warnings found by sparse:
drivers/net/smc91111.c:488:9:
warning: incorrect type in argument 1 (different base types)
expected void const volatile [noderef] <asn:2>*<noident>
got unsigned long [unsigned] offset
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fucntion s3c24x0_serial_flush() could behave wrong
because of missing brackets. Correct condition logic.
Problem found by sparse.
Signed-off-by: Marek Belisko <marek.belisko@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This has two purposes. First we need to factor out initialization
to be able to do something different on v3 type controllers,
second with this patch we are independent of preinitialized register
values.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The v2 controller has a totally different mechanism to check
whether the data we read had ecc errors or not. Implement this.
The mechanism in the v2 controller happens to be identical to
the v3 controller.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This prepares the driver for v3 support. The v3 controller
has a completely different register layout, so add a V1_V2_
namespace to the register defines to avoid confusion with
the v3 regs.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch prepares the driver to add v3 controller support
later. The v3 controller is basically the same controller as v1
and v2, but with a completely different register layout.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
NFC_SP_EN is cleared in probe and never set again, so we do not
need to clear it in other functions again.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We save/restore the value in the buffer anyway, so it makes
no difference whether we use main_area0 or main_area1. So,
we can use main_area0 and remove main_area1 from the driver
which is otherwise unused. Also, clean up the comments in
get_dev_status.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add the offset to the register base instead. This is done
in preparation for v3 controller support.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Silence this warning:
drivers/mci/mci-core.c:1324: Warning: argument `pdata' of command @param is not found in the argument list of mci_register(struct mci_host *host)
drivers/mci/mci-core.c:1324: Warning: The following parameters of mci_register(struct mci_host *host) are not documented:
parameter host
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some mci controllers cannot transfer data with their DMA engines
if the data is not sufficiently aligned. Normally this is a driver
problem, but hey, we have no problem aligning the data and keep
the burden from the drivers.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Juergen Beisert <jbe@pengutronix.de>
Acked-by: Juergen Beisert <jbe@pengurtronix.de>
The bitfield information was only added to fb_info when the
framebuffer actually was enabled. That made it impossible to
call 'bmp' before enabling the display.
So, move all fb_info init to a single place and make it a function
to better allow for multiple displays later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
So far only for reading blocks. This is based on the corresponding
U-Boot code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Juergen Beisert <jbe@pengutronix.de>
Acked-by: Juergen Beisert <jbe@pengurtronix.de>
The i.MX23 v2 architecture patch series was sligthly modified to easify
the i.MX28 architecture addition later on. So, we need now an index to
query the SSP clock frequency.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Due to a wrong rounding while calculating the clock divider the requested clock
of 25 MHz resulted into a 48 MHz clock. With this patch a clock frequency
below or equal the requested one will be set.
By using 'div' and 'rate' as vars, its also easier to check against the data
sheet.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this patch fix the following warning :
drivers/usb/gadget/fsl_udc.c: In function 'done':
drivers/usb/gadget/fsl_udc.c:566: warning: passing argument 1 of 'dma_inv_range' makes integer from pointer without a cast
arch/arm/include/asm/mmu.h:24: note: expected 'long unsigned int' but argument is of type 'void *'
drivers/usb/gadget/fsl_udc.c:566: warning: passing argument 2 of 'dma_inv_range' makes integer from pointer without a cast
arch/arm/include/asm/mmu.h:24: note: expected 'long unsigned int' but argument is of type 'void *'
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this patch fix the following error :
CC drivers/usb/gadget/epautoconf.o
drivers/usb/gadget/epautoconf.c:33: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'unsigned'
drivers/usb/gadget/epautoconf.c: In function 'ep_matches':
drivers/usb/gadget/epautoconf.c:168: error: 'epnum' undeclared (first use in this function)
drivers/usb/gadget/epautoconf.c:168: error: (Each undeclared identifier is reported only once
drivers/usb/gadget/epautoconf.c:168: error: for each function it appears in.)
drivers/usb/gadget/epautoconf.c: In function 'usb_ep_autoconfig_reset':
drivers/usb/gadget/epautoconf.c:304: error: 'epnum' undeclared (first use in this function)
Signed-off-by: Eric Bénard <eric@eukrea.com>
Alexander Aring
Robert Jarzmik
Sascha Hauer
Juergen Beisert
Jean-Christophe PLAGNIOL-VILLARD
Christian Hemp
Michael Grzeschik
Robert Jarzmik
Marc Kleine-Budde
Wolfram Sang
Franck Jullien
Hubert Feurstein
Antony Pavlov
Robert Schwebel
Fabian van der Werf
Rosen Kolev
Paul Fertser
Juergen Kilb
Teresa Gámez
Alexey Galakhov
Jan Weitzel
Baruch Siach
Juergen Beisert
Juergen Beisert
Robert Schwebel
Gregory CLEMENT
Krzysztof Halasa
Eric Bénard
Sanjeev Premi
Marek Belisko
Marek Belisko