the code is taken from linux & u-boot implementations
Validated on an i.MX53 which gives the following log :
ONFI flash detected ... ONFI param page 0 valid
NAND device: Manufacturer ID: 0x2c, Chip ID: 0x38 (Micron MT29F8G08ABABAWP), page size: 4096, OOB size: 224
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The standard devices are currently broken since they have
the size ~0. As now files use loff_t as file size which is a signed
type the read implementation gets confused and now returns -1.
The current implementation also has the (somewhat theorical) problem
that we do not have real streaming devices, so /dev/zero went out
of zeroes after reading 4GB (or now LLONG_MAX).
This patch introduces a new cdev flag DEVFS_IS_CHARACTER_DEV and a new
file size flag FILE_SIZE_STREAM which makes it possible to create
real stream devices instead.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Storing the size instead of the resource end in struct resource was
a mistake. 'size' ranges from 0 to UINT[32|64]_MAX + 1 which obviously
leads to problems. 'end' on the other hand will never exceed
UINT[32|64]_MAX. Also this way we can express a iomem region covering
the whole address space.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reduce confusion by making clear six bytes are passed,
not a string.
Signed-off-by: Johannes Stezenbach <js@sig21.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Change function name to command_var_complete in all calls and its declaration.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some drivers call dma_inv_range() on buffers, on arm these buffers must
be cache line aligned. This patch introduces a generic dma_alloc,
dma_free. Archs can implement in their own functions in "asm/dma.h" and add a:
#define dma_alloc dma_alloc
#define dma_free dma_free
On all other archs the generic versions, which translate into xmalloc
and free are used.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds a simple wd command which can setup, trigger and stop a watchdog
on the platform.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
include/linux/time.h contains several unused functions derived from U-Boot
code. Since this is a file under include/linux/ it should contain only code
from the kernel, so remove all this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Linux Kernel defines only one of __LITTLE_ENDIAN and
__BIG_ENDIAN. Endianess can then be tested with #ifdef __xx_ENDIAN. Userspace
always defined both __LITTLE_ENDIAN and __BIG_ENDIAN and byteorder can then
be tested with #if __BYTE_ORDER == __xx_ENDIAN.
As we tend to use a lot of Kernel code in barebox we switch to use the kernel
way of determing the byte order.
As this always causes a lot of confusion add a check to include/common.h to
make sure only one of __LITTLE_ENDIAN and __BIG_ENDIAN is defined.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Straight forward port of Synopsys Designware ethernet
driver from u-boot v2012.04.01.
Signed-off-by: Johannes Stezenbach <js@sig21.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
resource_size_t can be 32bit or 64bit depending on the architecture.
Add a define for it to be able to printf a resource_size_t correctly
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When barebox headers get included from HOSTCC tools they should not
include other architecture specific headers as barebox might get
cross-compiled. Instead, the tool itself should include "compiler.h".
Signed-off-by: Dirk Hörner <dirker@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently magicvar fails on variables containing a '.' because we can't
use these as C names. Overcome this by adding a new macro which allows
to specify a name seperately.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We currently use the environment variable 'bootargs' to get the
Linux bootargs. This patch allows for a more flexible bootargs
generation using global variables. With it the Linux bootargs
are concatenated from multiple variables. This allows to replace
parts of the bootargs string without having to reconstruct it
completely.
With this bootargs can be constructed like:
global linux.bootargs.base="console=ttyS0,115200"
global linux.bootargs.ip="ip=dhcp"
global linux.mtdparts="physmap-flash.0:512K(nor0.barebox),-(root)"
This will then automatically be combined into a kernel bootargs
string during boot.
If the 'linux.bootargs.' variables are all empty the old standard
'bootargs' way will be used.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This implements global shell variable support. This is done by registering
a new device named 'global', so global variables are just plain device
parameters.
Global variables are useful for storing the global state in the environment.
Currently we do this by sourcing scripts instead of executing them which is
quite limiting.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add this definition in preparation for the introduction of the
mpc85xx support.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
cpu_read*() and cpu_wrire*() are precisely equal to __raw_read*() and
__raw_write*().
Striving for correctness we can replace all those __raw_*() with cpu_*()
as that's exactly what the former ones do.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Useful for allocating a string list entry on the fly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Allocate the string in string list seperately instead of
embedding a zero length string into struct stringlist.
Besides looking cleaner this allows us to implement a
string_list_asprintf.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Some phys need board specific fixups. To be able to do this
from board code add mii_open/mii_close functions so that the
board can use the regular mii_read/mii_write functions.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently only 100Mb/s is tested. Freescale's U-Boot suggests that
there are some additional adjustments necessary for Gigabit support.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to execute any file and detect it's type to handle it.
This will allow to use shell for bootp bootfile or dfu.
You can register multiple hook for the same filetype. They will be execute
in the invert order of register. If a hook does not handle the file you just
return -ERESTARTNOHAND;
This is only available with hush parser.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Currently all devices have an id meaning that all devicenames
end with a number. This patch adds a DEVICE_ID_SINGLE to make
it ppossible to register a device without an id assigned to
it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Android Image contains 3 components and params
- kernel
- initrd
- second stage (optional)
- tags addr
- bootargs
In fast boot the initrd is mandatory, in barebox we are less restrictive
use the initrd only if present
add to env params:
aimage_noverwrite_bootargs
Disable overwrite of the bootargs with the one present in aimage
aimage_noverwrite_tags
Disable overwrite of the tags addr with the one present in aimage
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
You can now use AINSI color in the display of the menu or menu_entry.
As the length of the string is not any more the same as the display simplify
the invertion display managemnent.
We just now invert the fontground and backgound on the string itself as done
in Kconfig.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Introduce getenv_ip_dns to be able to do not do the resolv when using it in
resolv for the nameserver (Do not loop).
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Since we do not have ISP1504-related functions, we migrated to ULPI.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Added ULPI detection function.
Same function from isp1504 driver removed.
Used implementation from Linux kernel.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
These registers can be used for any standart ULPI chip,
not only for ISP1504.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds an automount command which makes it possible
to execute a script when a certain directory is first accessed.
It's the commands responsibility to make this directory available
(bringing devices up and mounting it). This results in automount
support which makes sure that from the shell every file can
be accessed without having to care for device bringup. Bringing
up devices may be expensive (USB, dhcp). The automount support
makes it easy for the environment to bringup devices when they
are actually needed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
every struct fs_device_d contains a struct mtab_entry, so they
have a 1:1 relationship. Instead of having to use container_of
to get from a struct mtab_entry to a struct fs_device_d we can
better embed the members of struct mtab_entry into struct fs_device_d
directly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support for KS8851 16bit MLL chip from Micrel Inc.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This shrinks the resulting binary size by ~25%. Exceptions
are still handled in arm mode, so we have to explicitely
put .arm directives into the exception code. Thumb-2 mode
has been tested on i.MX51 Babbage board.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
execute_command is the single point where commands are executed and thus a new
getopt context is needed. currently we call getopt_reset here to reset the
context. This breaks though when a command tries to run a command itself by
calling execute_command or run_command. In this case we have to store the
context and restore it afterwards. The same is necessary in builtin_getopt.
Currently noone does this so this one shouldn't fix a bug, but merely allows
us to do such things later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
By putting the fs devices/drivers on a bus on its own we can hook
into the bus remove function to cleanup the fs device. This way
we can unmount a device by simply unregistering the device which
is useful for for example USB mass storage devices. These can now
unregister the assoiated filesystems by unregistering their child
devices.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We store the fs devices in a list only because we want to
check if the fs driver needs a backingstore or not. The
driver will bail out anyway if it needs a backingstore and
doesn't find one. So we can remove this check and thus remove
the list of fs devices.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To make the code a bit easier to read. Also, do not allow
to umount / when something else is mounted.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add variables to control the duty_ns and period_ns of PWM
chips. When these variables are set, a call to either
pwm_enable() or pwm_config() is performed to enforce the
setup values.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds framework support for PWM (pulse width modulation)
devices.
A new pwm can be registered from a hardware driver using
pwmchip_add(). It can then be requested from a client driver using
pwm_request(). A string is used as a unique identifier for the
pwms. It should usually be initialized by the hardware drivers
using dev_name(dev). The client API is the same as currently
in the Linux Kernel.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The current caching layer only has a single buffer for
writing and reading. The FAT driver often accesses the
fat and then data again, which currently can't be cached.
Reimplement this with a list of cached chunks. The number
of chunks and their sizes are currently hardcoded, but
that could be easily made configurable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently we test the cards capabilities for being 8bit capable.
This does not work since noone ever sets this bit. Unfortunately
there is no bit to test 8bit capability, so we introduce a patch
from the kernel which puts the mmc card into 8bit mode and tests
whether it can succesfully read the ext_csd in this mode.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The mci layer currently passes around a struct device_d for
its internal use. Apart from being confusing this drops
typesafety for no good reason. Instead, pass around a struct
mci.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As we'll need more arguments to set_ios over time put them
in a struct mci_ios like the kernel does.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
At least ARM allows us to dump the stack, but we currently
have no prototype for this. Add a dump_stack prototype and
provide a static inline function for architectures without
stack dump support. Also, call dump_stack() in panic() to
provide more information in the case of a panic.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
kfifo currently only works with dynamically allocated fifos.
Change the currently unused kfifo_init to take a preallocated
fifo. This allows for statically initialized fifos.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently, we can only print the phy_status. Factor out the routine to
get the status, so we can query it from fec drivers and configure
accordingly. Needed because mx28 needs a special bit set for 10Mbit.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this allow to check we do not exceed the size of the SRAM as example
introduce BAREBOX_MAX_BARE_INIT_SIZE the maximum size of bare_init
this will allow your bare_init will fit in SRAM as example
ARCH can overwrite it via ARCH_BAREBOX_MAX_BARE_INIT_SIZE
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- add a usbserial command to enable/disable the serial gadget
- allow dfu and usbserial to cohexist in the same barebox
- add a timeout in u_serial so that we don't get locked if the user
enable usbserial from a UART console but doesn't consume the data
on the usbserial port created on the PC
- remove debug or verbose printf
- tested on i.MX25 & i.MX35 & usb-a926x
Signed-off-by: Eric Bénard <eric@eukrea.com>
Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add bit reversing utility, taken from the linux kernel.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As flash memories need BCH correcting codes, add the BCH
library, taken from the linux kernel.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
TLSF: Two Level Segregated Fit memory allocator implementation.
Written by Matthew Conte (matt@baisoku.org).
Public Domain, no restrictions.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Split /dev/mtd and /dev/mtdoob devices.
Remove from mtd structure the mtdoob character device.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Change NAND_WRITE into MTD_WRITE.
Change "page_shift" references in the core, which are purely
NAND, into mtd->writesize which is MTD generic.
Rename all "info" (struct mtd_info) into "mtd".
Also provide a parameter to add_mtd_device() so that legacy
nand devices still appear as nand<N>.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add a general twl device driver twlcore to call i2c send/write
functions.
Abstract twl4030 to call twlcore functions.
Fixed some code-styling issues pointed out by checkpatch.
Signed-off-by: Alexander Aring <a.aring@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add sorted insert in stringlist functions.
Also added function to checked if string is already
in string list.
Signed-off-by: Alexander Aring <a.aring@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This switches the bootm code to the new uimage code. Also
bootm can now handle other types of images than uImages.
Currently the only architecture making use of this is
arm which allows to boot zImages, raw images and barebox
images.
I intended to make a more bisectable series from this but
I failed becuase there are many dependencies and no matter
how I tried the patches grew bigger and and bigger. So I
decided to put this all in a single patch.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Provide a new API for accessing uImages which makes it easy
for commands to open images, verify them, load to (free) sdram
regions and show information about uImages.
- We now do not load the image to malloced space anymore.
- The data in the header is now stored in cpu native endianess
after uimage_open which makes it easy to access the header data.
- uImage can be loaded to dynamically allocated sdram regions.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently we have of_get_fixed_tree() which assumes that
there is a global variable holding a oftree. This seems
not very flexible, so for now introduce a of_fix_tree()
which takes an fdt_header as argument and walks the
list of registered of fixup functions.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Support for the old DM9000E device is now part of the new dm9k.c driver. So,
remove the old driver source and switch all users to the new driver.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some console are transient, like the USB connected serial
console which should be removed when the USB connection is
severed.
Enable console removal for such devices.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
cramfs does not compile since we updated zlib to the kernel
version. Fix this by using the kernel version of uncompress.c
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
uncompress() has the same prototype as the various kernel decompress
functions. It automatically detects the compression type and selects
the correct uncompress function.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Several filetypes can be autodetected. Barebox could make use
of this in several ways:
- Add a command to detect filetypes
- detect arm zImages and uImages to unify the different boot commands
- maybe detect UBI or JFFS2 images to construct parts of the kernel
command line
- select correct uncompression function based on filetype
This patch adds basic support to detect filetypes.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The kernel uncompression functions have a unified API. Switch
to the kernel implementation to unify the different uncompression
APIs. As a bonus the kernel implementation is much smaller.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The rests of U-Boots iminfo command are sitting in commands/bootm.c and
are in a nonusable state. Factor it out to its own file and make it work
again.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We never had interrupt support in barebox and we have no plans to
add interrupt support. Even if we do I doubt the current fragments
of irq support are helpful, so remove them.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This simple driver enables a generic driver for ATA type of devices to get
access to the so called 'register file' of an ATA drive.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This changed patch removes more of the u-boot like code and replace it with
kernel like code.
commit 2a8966936af6b54573483ade559d0633e489b515
Author: Juergen Beisert <jbe@pengutronix.de>
Date: Fri Sep 30 15:06:26 2011 +0200
ATA Disk Support: Add support for native ATA type drives
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This covers disk like media like SD card, CF cards, regular hard disks and also
USB mass storage devices. Most common used partition table is still of DOS type.
This implementation is prepared to support more partition types in the future.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For disk like devices attached to MCI, ATA or USB it depends on the order they
will be recognized. So an unique number for all disk like devices is required.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds MMC over SPI support to mci-core.c and
mci_spi.c driver.
This driver is useful when SOC doesn't have built-in MCI
component. Tested with nios, 2Go SD-CARD and FAT file system.
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This function in used by the MCI over SPI driver.
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The puts functions now properly return the number of characters
written. With this we can also fix fprintf.
Also, remove never reached return in fputs.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds basic device tree command support. So far we can
parse a flat device tree (-p), which also stores the tree
in memory, dump it (-d) and free (-f) the internally stored tree.
The chosen node can be updated with barebox bootargs, no other
device tree manipulation is implemented yet.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
vanilla libfdt 1.3.0 from the dtc git:
git://git.jdl.com/software/dtc.git
Only small adjustments to compile with barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When building sandbox, barebox is built with -Dprintf=barebox_printf as
to not collide with the printf provided by libc. This would also match
the format(printf) function __attribute__.
Since gcc documents that __printf__ can be used instead of printf as a
format attribute, use this instead and avoid a lot of noisy warnings.
NB: this relates to 6b082cfe9f which was
an earlier attempt at solving this, which got reverted due to other
regressions.
Signed-off-by: Loïc Minier <loic.minier@linaro.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
rename it to digest_file_window
introduce digest_file to digest a file and digest_file_by_name
where we specify the algo by name
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Modified the i2c_imx driver to support data-only transfers, without
command byte. This allows to construct more complex i2c transfers
and support non genuine devices like Atmel ATxx secure memory, where the
master reads data after a write command.
Signed-off-by: Rosen Kolev <rosen.kolev@amk-drives.bg>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently it's not implemented by any driver so add a note to the
documentation.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
you can choose the initrd via @<num>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
as in barebox the data could be the mapped file or a allocated memory with
just the data (non header)
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We introduced several new functions to ease our life
on ppc, use themn on the pcm030:
- setup iomux and bus clocks in board code
- add sdram memory according to detected size
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On arm we have the concept of memory banks which can
be registered and iterated over. This is useful for
other architectures aswell, so add some generic infrastructure
for this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There are no generic native ordered io accessors. This sometimes
leads to
v = in_be32(a);
v = readl(a);
in generic drivers. Instead, use io accessors which are explicitely
native ordered.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Implemented an initial version of USB mass storage device driver,
supporting USB mass storage devices with SCSI interface and BBB
protocol. It implements the ATA interface and registers diskovered
LUNs with the disk driver.
To allow for some generic io accessors introduce io.h and use
this instead of asm/io.h throughout the tree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds the m25p80 driver. It has been ported from
Linux. MTD code has been removed. It has been tested with
a m25p40 chip and the Altera SPI master driver.
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If a timeout is specified and expired the command will be executed
by default boot
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In barebox we used 1MiB sections to map our SDRAM cachable. This
has the drawback that we have to map our sdram twice: cached for
normal sdram and uncached for DMA operations. As address space gets
sparse on newer systems we are sometines unable to find a suitably
big enough area for the dma coherent space.
This patch changes the MMU code to use second level page tables.
With it we can implement dma_alloc_coherent as normal malloc, we
just have to remap the allocated area uncached afterwards and map
it cached again after free().
This makes arm_create_section(), setup_dma_coherent() and mmu_enable()
noops.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
on ARM we need to init all the memory before the mmu and before any drivers
use dma_alloc_coherent
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
as now all the drivers and board have been switch to resource whe can drop
map_base and size from device_d
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
use generic read/write depending on the memory size
if no reg_read/write defined
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
MAC addresses are sometimes stored at unusual places. This
patch makes it possible to give a MAC address to a ethernet
device id. This is independent of the device actually being
present.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
pass the hccr and hcor register base via resource
instroduce add_generic_usb_echi_device with hccr = base + 0x100 and
hcor = base + 0x140
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Add a helper function for boards to register their memory
devices. This makes the board code smaller and also helps
getting rid of map_base and struct memory_platform_data.
And switch all of the memory to it
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
we keep struct memory_platform_data for now on we will switch off the memories
resources to struct resource
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
We might want to add real resource tracking later. Also
The first resource may not be a IORESOURCE_MEM at all.
For these reasons introduce a wrapper function for
driver so that they do not have to fiddle with resources
directly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
and add multi resource per device support
for now we keep the old map_base and size temporary but will switch all of
the used step by step to them resource way
and mirror the first resource to the map_base and size if available
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
convert enable_interrupts() and disable_interrupts() to static inline
if no IRQ supoprt enable
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
During the creation of a new spi device, we need to
have the possiblility to give the bits_per_word value
to master->setup.
As a matter of fact, spi master could check the spi
device bits_per_word and compare this value against its
capabilities.
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The current version of struct stat has been taken from an
ancient Linux Kernel. It looks different on different architectures
to support different userspace formats of struct stat. As we do
not have a userspace on barebox there is no need to keep different
versions.
Also, this unification make MIPS arch possible.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit adds support for most spi eeproms, such as the
Atmel at25 models.
Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit adds the following spi transfer functions:
- spi_write
- spi_read
- spi_write_then_read
- spi_w8r8
The code has been ported from the linux kernel.
Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In the spi layer this pointer will be assigned to the
platform_data pointer of the new spi device, thus it can
be accessed in the drivers 'probe' handler.
Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fix the warning/error:
drivers/mci/mci-core.c: In function 'mci_card_probe':
drivers/mci/mci-core.c:1195: warning: implicit declaration of function 'pr_warn'
...
drivers/built-in.o: In function `mci_card_probe':
mc13892.c:(.text.mci_card_probe+0x68): undefined reference to `pr_warn'
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
While getting rid of all the format(barebox_printf) warnings was nice,
it caused the printf calls in arch/sandbox/os/common.c to get directed
to the barebox versions rather than the libc ones causing a crash:
E.G. before this revert:
nm -a barebox|grep -w printf
0000000000404fa3 T print
And after:
nm -a barebox|grep -w printf
U printf@@GLIBC_2.2.5
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This reverts commit 6b082cfe9f.
This is useful to detect a barebox image and to be able
to copy only the image size if barebox is stored on
raw partitions which are bigger than the image.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With sandbox printf is redefined as barebox_printf so that it does
not collide with the glibc printf. This leads to tons of
include/stdio.h:12:1: warning: ‘barebox_printf’ is an unrecognized format function type
warnings. This patch fixes this.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Normally the default path to save the environment is /dev/env0. However,
we can't map a file in a fat filesystem to /dev/env0. So if we want to
store the environment in a file in fat we have to make it configurable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is not yet used, but with this the different network
commands can get rid of their global data.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The old way happily removed cdev entries which were no bb dev
at all. Fix this by checking if the given device actually is
a bb device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Environment variables are only useful in interactive environments.
Make it optional on our way to support a noninteractive barebox.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a simple block layer to barebox. Reading and writing
to block devices can be painfully slow without caching, so
add a simple caching layer here.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch makes the USB command optional and makes usb_rescan a
global function. This way we can use USB in noninteractive
environments.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In a noninteractive environment barebox will be compiled without
command support. So move version_string to a seperate file which
is compiled unconditionally.
Also, display the banner when the simple console support is used.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This makes it possible to compile without devfs. devfs_create/devfs_remove
is used by drivers and thus must still be present even without devfs support.
Also, this patch adds cdev_open/cdev_close/cdev_flush/cdev_ioctl calls to
work with devices without using the file api.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Christian Kapeller
Eric Bénard
Sascha Hauer
Johannes Stezenbach
Antony Pavlov
Steffen Trumtrar
Marc Kleine-Budde
Juergen Beisert
Dirk Hörner
Renaud Barbier
Alexander Shiyan
Krzysztof Halasa
Jean-Christophe PLAGNIOL-VILLARD
Wolfram Sang
Jan Weitzel
Robert Jarzmik
Alexander Aring
Robert Jarzmik
Franck Jullien
Hubert Feurstein
Loïc Minier
Rosen Kolev
Paul Fertser
Carlo Caione
Dirk Behme