so we can add easly the console_none support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
warning: the ohci work only without MMU
enable:
- ehci
- usb strorage
- usb net asix
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
warning: the ohci work only without MMU
enable:
- ehci
- usb strorage
- usb net asix
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Hi Sascha,
I've made the changes you suggested in this resent patch.
Everything related to custom ATAGs has been moved to the board
directory.
The generic code does not make any references to feature lists or
bootloader versions.
About the setup_feature_list prototype:
it has been renamed to atag_appender
it's not a function, it's a pointer to a function. Can it have a
prototype other than it's own declaration?
All non-related changes has been dropped. They were checkpatch.pl
warnings unrelated to this patch.
Regards,
Vicente.
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
MC34708 depend on I2C or SPI, so let driver depend on SPI too
and rename config option name to MFD_MC34708.
Signed-off-by: Wjatscheslaw Stoljarski <wjatscheslaw.stoljarski@kiwigrid.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This EEPROM is found on the expansion boards available for the 10036
module. Since we won't need to do anything fancy except reading/writing
from it, use bitbanging to communicate with it.
This EEPROM will hold mostly the board_id so that we can determine if
there is an expansion board plugged in and what expansion board it is.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds support for the Garz+Fricke Vincell board. This has
a i.MX53 Processor with 512MB of DDR3 RAM.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
as the support atmel mci drivers does not work on rm9200 and we have the
possibility to use it as spi use it
Originally on rm9200 when the interface mci is in SPI mode we use a DataFlash Card
so allow it but if no dataflash card option is enable use as mmc spi.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
on the 9g20 low power version we have a mmc spi as microSD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
on the 9g20 low power version we have a mmc spi as microSD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
on all the cpu module we have a at25 except on the cogent where we have a at45
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Switch to new environment and add the bootscripts needed for mmc. Also,
update defconfig for new environment.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds generic board support (CLEP7212, Linux ARM ID=91)
for CLPS711X-target.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Took the mx28evk defconfig, activated DMA and NAND, used savedefconfig;
this patch is the result.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
now we can flash barebox by itself as the bootstrap need to use pmecc
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Adapt phylib from linux
switch all the driver to it
reimplement mii bus
This will allow to have
- phy drivers
- to only connect the phy at then opening of the device
- if the phy is not ready or not up fail on open
Same behaviour as in linux and will allow to share code and simplify porting.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
so be can add more format support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
imx23-olinuxino is a board designed by Olimex.
It has the following features:
- Freescale iMX233 ARM926J processor at 454MHz
-64 MB RAM
-SD-card connector
-TV PAL/NTSC video output
-2 USB High Speed Hosts
-Ethernet 100 Mbit
-Stereo Audio Input
-Stereo Headphones Audio Output
More information at:
http://www.olimex.com/dev/imx233-olinuxino-maxi.html
Signed-off-by: Fadil Berisha <f.koliqi@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we are smaller than the 256KiB reserved for barebox
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we are smaller than the 256KiB reserved for barebox
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Tiny6410 and its base board is a pure development platform.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A look into "arch/arm/boards/" offers various boards starting with the
vendor's name in their directory name (like 'eukrea' and 'freescale').
This patch does the same for the currently existing FriendlyARM board
Mini2440.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
This configuration can be used to use barebox as
x-loader replacement.
Also the ECC-Mode is changed from SOFT to BCH8.
Signed-off-by: Juergen Kilb <J.Kilb@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds support for ConnectCore® i.MX51 board from Digi International.
A separate option includes support for debugging board for this module.
Some code taken from the bootloader U-Boot and patch from Digi.
Functional of Ethernet not tested yet.
barebox 2012.05.0-00316-g4024d9c-dirty #0 Wed Jun 6 13:08:25 MSK 2012
Board: ConnectCore i.MX51
Module Variant: i.MX515@600MHz, PHY, Acceleromter (0x0b)
Module HW Rev : 02
Module Serial : B111156789
mc13xxx-spi@mc13xxx-spi0: Found MC13892 ID: 0x0045d0 [Rev: 2.0a]
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,3V 8-bit)
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: Bad block at 0x00ce0000
nand_read_bbt: Bad block at 0x05bc0000
nand_read_bbt: Bad block at 0x0bc40000
ehci@ehci0: USB EHCI 1.00
detected i.MX51 rev 3.0
imx-esdhc@mci0: registered as mci0
imx-esdhc@mci1: registered as mci1
Malloc space: 0x95f00000 -> 0x97efffff (size 32 MB)
Stack space : 0x95ef8000 -> 0x95f00000 (size 32 kB)
envfs: wrong magic on /dev/env0
no valid environment found on /dev/env0. Using default environment
running /env/bin/init...
Hit any key to stop autoboot: 3
barebox@ConnectCore i.MX51:/
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Several boards are getting bigger than their specified maximum binary
size of 256Kb. Enable the TLSF allocator for them which is smaller
than the original dlmalloc. The changed defconfigs are:
eukrea_cpuimx25_defconfig
eukrea_cpuimx35_defconfig
eukrea_cpuimx51_defconfig
usb_a9260_defconfig
usb_a9263_128mib_defconfig
usb_a9263_defconfig
usb_a9g20_128mib_defconfig
usb_a9g20_defconfig
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
with:
- led
- USB Device
- uart
- net
- mmc
- MMU
dfu support
detect it at boot time
if the user button is pressed 5s and the vbus is 1 start the dfu
otherwise the vbus is 1 start usb serial
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This switches the pcm038 board to the new environment template and
does the necessary defaultconfig adjustments. Additionally it disables
UBI support as the pcm038 image is getting bigger and bigger and UBI
seems to be the most unused big (in size) feature.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Barebox cannot boot the recent mainline Linux kernels for the
i.MX21ADS board anymore when using TFTP, because the heap is too
small.
Signed-off-by: Jaccon Bastiaansen <jaccon.bastiaansen@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The MD2 add:
- uart 2
- ethernet
- usb
- spi
- i2c
so fix just add uart and ethernet
update defconfig
always enable the motherboard and drop the SHA256 support (to fix in the
256KiB).
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Supported devices:
- nand
- ethernet
- mmc0, mmc1 (on stk5v3 development board)
- led (on stk5v3 development board)
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Also renamed config option name to MFD_MC13XXX.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The pcm027 is a PXA270 based Phytec phyCORE board.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Boot via nfs instead of tftp and zImage.
Update nand partition layout to store the oftree.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Gregory HERMANT <gregory.hermant@calao-systems.com>
Fow now use Soft ECC for nand util we add the PMECC.
On-chip and board related peripherals definitions.
Basic implementation for VB board.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- enable MMU
- drop MTD as we do not have nand
- use tlsf
- bootm enable initrd
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since we do not have ISP1504-related functions, we migrated to ULPI.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
FIXME: part of or no data is written. File copy ends
with message: "atmel_mci@atmel_mci0: command/data timeout"
Signed-off-by: Asen Chavdarov Dimov <dimov@ronetix.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- change the kernel and rootfs locations
- correct the NAND mtd partitions
- fix the DDR RAM location(so BareBox load address)
- expect the root file system type to be UBIFS
Signed-off-by: Asen Chavdarov Dimov <dimov@ronetix.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When CONFIG_DEFAULT_ENVIRONMENT_GENERIC is set the Make system
will automatically compile in defaultenv/ into the environment. Some
boards explicitely add this path again in their defconfig which is
not needed. Remove it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To reduce the size of the MLO we have to activate thumb-2 support.
Otherwise the board will not boot.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Support for omap4 based Phytec phyCARD-A-XL2 board
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- use tslf
- bootm: enable oftree and uimage support
- enable mmu support
- drop cfi support (no nor on the board)
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
update fancy prompt to be the same as the other Atmel board
use the same feature on 9g10ek and 9261ek
- use tlsf
- enable MMU
- set max size to 256KiB
- bootm: add initrd support
- nand: drop non used hw ecc and oob device
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- set max size to 256KiB
- enable MMU
- bootm: enable oftree and initrd support
- nand: drop non used hw ecc
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Add Mitac MioA701 board initial support.
The support provides basic boot and :
- a console over USB (serial gadget).
- the SD card support
- the MTD docg3 support
- the LCD support
Add a check in the default environment for a barebox.env
file on the first partition (FAT). If the file exists,
source it instead of the normal boot procedure.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Remove what is an apparently valueless Kconfig variable HAS_OMAP_NAND.
A search of the entire source tree shows:
$ grep -r HAS_OMAP_NAND *
arch/arm/mach-omap/Kconfig: select HAS_OMAP_NAND
arch/arm/mach-omap/Kconfig: select HAS_OMAP_NAND
arch/arm/mach-omap/Kconfig: select HAS_OMAP_NAND
arch/arm/mach-omap/Kconfig: select HAS_OMAP_NAND
arch/arm/mach-omap/Kconfig:config HAS_OMAP_NAND
arch/arm/configs/phycard_a_l1_defconfig:CONFIG_HAS_OMAP_NAND=y
$
where the definition of that variable is simply:
config HAS_OMAP_NAND
bool
so it seems pretty clear it can be removed as nothing is using it.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Adding overlay support for phyCORE-i.MX35.
Also move the TEXT_BASE to leave enough space for the overlay image
at the end of the RAM.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Setting up the clocks does not work when the stack is in SDRAM.
Moving the stack to SRAM allows us to do the lowlevel clock setup
later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Sanjeev Premi <premi@ti.com>
use ds3 for heartbeat and ds5 for dfu
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
enable serial and dfu at the same time
senario if the usb device is plugged and the BP is not pressed at boot time
during 5s the usbserial will be enable
disable zlib support to fit in the 256K
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds basic support for the mx28-evk board. Debug UART, MMC and FEC
have been successfully used.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
configure BP4 and BP3
use BP4 to start DFU mode at boot
if BP4 is pressed at boot time and maintain at least 5s the dfu is started
otherwise we boot normaly
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
by default boot from nand with the bootstrap as first stage
update the smc config for 9g20-ek
switch to defaultenv
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Support for the old DM9000E device is now part of the new dm9k.c driver. So,
remove the old driver source and switch all users to the new driver.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Barebox cannot boot the recent mainline Linux kernels for the
i.MX21ADS board anymore when using TFTP, because the heap is too
small.
This is solved by increasing the heapsize to 5Mbyte.
Signed-off-by: Jaccon Bastiaansen <jaccon.bastiaansen@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Contrary to other Atmel boards, the AT91SAM9M10G45EK board file only
describes the case where NAND is used as the storage for Barebox and
its environment. Therefore, it makes sense to enable the Atmel NAND
driver in the default configuration for this board.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
MLO is to big (>40000) to save Space disable CONFIG_FS_RAMFS and
CONFIG_FS_DEVFS in defconfig
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We never supported the sigmatel stm chips and probably
never will. So do the first step and rename the architecture
to mxs just like in the kernel.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This file is to be used in conjunction with the TX28 CPU module.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
tested with qemu only
qemu-system-arm -M versatilepb -monitor null -kernel barebox -net nic -net user -tftp "<uImage-path>/" -serial stdio
add -nographic if you do not want the lcd via sdl
Signed-off-by: Alexey Zaytsev <alexey.zaytsev@gmail.com>
update:
- use default env
- move arm_timer.h as in the kernel
- add nor flash support
- udpate defconfig
- fix copyright copy from linux
- fix ARCH_TEXT_BASE
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Here are the modification to at91sam9261 files dedicated to the support of
at91sam9g10. This direction has been adopted to minimize code duplication.
All at91sam9261 drivers are enabled in _devices and board files. Modificaton
to peripherals that support at91sam9g10 will be added in future patches.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Here are the at91 specific files dedicated to the at91sam9g45 series. They
mimic the traditional at91 way of managing chips & boards.
The first board that embeds at91sam9g45 chip is the AT91SAM9M10G45-EK. In
the future, we will add the m10 and other boards revisions
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
AT91sam9261 series is an ARM 926ej-s SOC family clocked at 190/100MHz.
The first board that embeds at91sam9261 chip is the AT91SAM9261-EK.
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
This work is mainly based on a9m2440 board implementation
from Juergen Beisert <jbe@pengutronix.de>. Functionality
was tested only running barebox from ram. Loading to flash
and booting will not work because missing lowlevel_init
functionality (lack of jtag debugger on my side ;)).
Signed-off-by: Marek Belisko <marek.belisko@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
commit 69f4b4f403b1dbe17a95be340688dc77d166bb4e
Author: Juergen Beisert <jbe@pengutronix.de>
Date: Mon Oct 11 16:42:59 2010 +0200
Adapt the defconfig for a full blown ChumbyOne support
Make the ChumbyOne use of the MCI framework.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- support NAND external boot
- enable only used clocks
- LCD fix in /env/bin/init
- I2C support
- SDCard support
- USB Host 1 support
- DFU support on OTG port
- update defconfig
Signed-off-by: Eric Bénard <eric@eukrea.com>
this will we usefull to enable functionnality if used
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The so called "chumby one" aka falconwing is an i.MX23 based platform.
Note: This is work in progress. Use with care.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
AT91sam9g20 is an evolution of the at91sam9260 with a faster clock
speed.
We created a new board for this device but based the chip support
directly on 9260 files with little updates.
Here is the chip page on Atmel wabsite:
http://atmel.com/dyn/products/product_card.asp?part_id=4337
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will reduce and simplify defconfigs maintainance
it will also save some disk space
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
this rework is done in order to add a phylib and allow to have phy driver support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
with the following support
uart 0 & 1
network
nand
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Andrea GALLO <andrea.gallo@stericsson.com>
Cc: Gael SALLES <gael.salles@stericsson.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Jean-Christophe PLAGNIOL-VILLARD
Vicente Bergas
Sascha Hauer
Wjatscheslaw Stoljarski (Slawa)
Teresa Gámez
Jan Luebbe
Maxime Ripard
Alexander Shiyan
Wolfram Sang
Carlo Caione
Fadil Berisha
Juergen Beisert
Alexey Galakhov
Juergen Kilb
Antony Pavlov
Anand Gadiyar
Eric Bénard
Jaccon Bastiaansen
Christian Kapeller
Marc Kleine-Budde
Esben Haabendal
Asen Chavdarov Dimov
Jan Weitzel
Robert Jarzmik
Robert P. J. Day
Michael Grzeschik
Thomas Petazzoni
Hubert Feurstein
Juergen Beisert
Alexey Zaytsev
Marek Belisko